1、 ETSI TS 13Evolved Universal TBase Station(3GPP TS 36.14TECHNICAL SPECIFICATION136 141 V11.14.0 (201LTE; l Terrestrial Radio Access (E-ion (BS) conformance testing .141 version 11.14.0 Release 1016-01) UTRA); g 11) ETSI ETSI TS 136 141 V11.14.0 (2016-01)13GPP TS 36.141 version 11.14.0 Release 11Refe
2、rence RTS/TSGR-0436141vbe0 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The pre
3、sent document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ET
4、SI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that
5、the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/por
6、tal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modif
7、ied without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit o
8、f its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 141 V11.14.0 (2016-01)23GPP TS 36.141 version 11.14.0 Release 11
9、Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property
10、 Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searche
11、s, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced
12、by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between
13、 GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of
14、 the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 141 V11.14.0 (2016-01)33GPP TS 36.141 version 11.14.0 Release 11Contents Intellectual Property Rights 2g3Foreword
15、 . 2g3Modal verbs terminology 2g3Foreword . 12g31 Scope 13g32 References 13g33 Definitions, symbols and abbreviations . 14g33.1 Definitions 14g33.2 Symbols 16g33.3 Abbreviations . 18g34 General test conditions and declarations 19g34.1 Measurement uncertainties and Test Requirements . 20g34.1.1 Gener
16、al 20g34.1.2 Acceptable uncertainty of Test System . 20g34.1.2.1 Measurement of transmitter 21g34.1.2.2 Measurement of receiver . 21g34.1.2.3 Measurement of performance requirement . 26g34.1.3 Interpretation of measurement results . 30g34.2 Base station classes 30g34.3 Regional requirements 31g34.4
17、Selection of configurations for testing 33g34.5 BS Configurations 33g34.5.1 Transmit configurations 33g34.5.1.1 Transmission with multiple transmitter antenna connectors . 33g34.5.2 Receive configurations . 33g34.5.2.1 Reception with multiple receiver antenna connectors, receiver diversity . 34g34.5
18、.3 Duplexers 34g34.5.4 Power supply options 34g34.5.5 Ancillary RF amplifiers 35g34.5.6 BS with integrated Iuant BS modem 35g34.5.7 BS using antenna arrays 35g34.5.7.1 Receiver tests 36g34.5.7.2 Transmitter tests 36g34.6 Manufacturer“s declarations of regional and optional requirements 37g34.6.1 Ope
19、rating band and frequency range 37g34.6.2 Channel bandwidth . 37g34.6.3 Base station output power . 37g34.6.4 Spurious emissions Category 37g34.6.5 Additional operating band unwanted emissions . 38g34.6.6 Co-existence with other systems . 38g34.6.7 Co-location with other base stations . 38g34.6.8 Ma
20、nufacturers declarations of supported RF configurations . 38g34.7 Specified frequency range and supported channel bandwidth 40g34.7.1 Base Station RF Bandwidth position for multi-carrier and/or CA testing 40g34.7.2 Aggregated Channel Bandwidth position for Contiguous CA occupied bandwidth testing .
21、41g34.8 Format and interpretation of tests . 41g34.9 Applicability of requirements . 42g34.10 Test configurations for multi-carrier and/or CA operation . 42g34.10.1 ETC1: Contiguous spectrum operation . 42g34.10.1.1 ETC1 generation . 42g34.10.1.2 ETC1 power allocation . 43g34.10.2 ETC2: Contiguous C
22、A occupied bandwidth . 43g34.10.2.1 ETC2 generation . 43g3ETSI ETSI TS 136 141 V11.14.0 (2016-01)43GPP TS 36.141 version 11.14.0 Release 114.10.2.2 ETC2 power allocation . 43g34.10.3 ETC3: Non-contiguous spectrum operation . 43g34.10.3.1 ETC3 generation . 44g34.10.3.2 ETC3 power allocation . 44g34.1
23、0.3.24 VOID . 44g34.10.4 ETC4: Multi-band test configuration for full carrier allocation 44g34.10.4.1 ETC4 generation . 44g34.10.4.2 ETC4 power allocation . 45g34.10.5 ETC5: Multi-band test configuration with high PSD per carrier 45g34.10.5.1 ETC5 generation . 45g34.10.5.2 ETC5 power allocation . 45
24、g34.11 Applicability of test configurations 46g34.12 Requirements for BS capable of multi-band operation 48g35 Operating bands and channel arrangement . 49g35.1 General . 49g35.2 Void 49g35.3 Void 49g35.4 Void 49g35.5 Operating bands 49g35.6 Channel bandwidth . 52g35.7 Channel arrangement 54g35.7.1
25、Channel spacing 54g35.7.1A CA Channel spacing . 54g35.7.2 Channel raster . 54g35.7.3 Carrier frequency and EARFCN . 54g35.8 Requirements for contiguous and non-contiguous spectrum 55g36 Transmitter characteristics . 57g36.1 General . 57g36.1.1 E-UTRA Test Models . 57g36.1.1.1 E-UTRA Test Model 1.1 (
26、E-TM1.1). 57g36.1.1.2 E-UTRA Test Model 1.2 (E-TM1.2). 58g36.1.1.3 E-UTRA Test Model 2 (E-TM2) 61g36.1.1.4 E-UTRA Test Model 3.1 (E-TM3.1). 62g36.1.1.5 E-UTRA Test Model 3.2 (E-TM3.2). 63g36.1.1.6 E-UTRA Test Model 3.3 (E-TM3.3). 66g36.1.2 Data content of Physical channels and Signals . 69g36.1.2.1
27、Reference signals 69g36.1.2.2 Primary Synchronization signal 69g36.1.2.3 Secondary Synchronization signal 69g36.1.2.4 PBCH 69g36.1.2.5 PCFICH. 69g36.1.2.6 PHICH . 69g36.1.2.7 PDCCH . 70g36.1.2.8 PDSCH 70g36.2 Base station output power 71g36.2.1 Definition and applicability 71g36.2.2 Minimum Requirem
28、ent . 71g36.2.3 Test purpose 71g36.2.4 Method of test . 71g36.2.4.1 Initial conditions . 71g36.2.4.2 Procedure 72g36.2.5 Test Requirements 72g36.2.6 Home BS output power for adjacent UTRA channel protection. 72g36.2.6.1 Definition and applicability . 72g36.2.6.2 Minimum Requirement . 73g36.2.6.3 Tes
29、t purpose 73g36.2.6.4 Method of test . 73g36.2.6.4.1 Initial conditions 73g36.2.6.4.2 Procedure . 74g36.2.6.5 Test Requirements . 74g3ETSI ETSI TS 136 141 V11.14.0 (2016-01)53GPP TS 36.141 version 11.14.0 Release 116.2.7 Home BS output power for adjacent E-UTRA channel protection . 75g36.2.7.1 Defin
30、ition and applicability . 75g36.2.7.2 Minimum Requirement . 75g36.2.7.3 Test purpose 76g36.2.7.4 Method of test . 76g36.2.7.4.1 Initial conditions 76g36.2.7.4.2 Procedure . 76g36.2.7.5 Test Requirements . 77g36.2.8 Home BS output power for co-channel E-UTRA protection 77g36.2.8.1 Definition and appl
31、icability . 77g36.2.8.2 Minimum Requirement . 78g36.2.8.3 Test purpose 78g36.2.8.4 Method of test . 78g36.2.8.4.1 Initial conditions 78g36.2.8.4.2 Procedure . 79g36.2.8.5 Test Requirements . 79g36.3 Output power dynamics 80g36.3.1 RE Power control dynamic range . 80g36.3.1.1 Definition and applicabi
32、lity . 80g36.3.1.2 Minimum Requirement . 80g36.3.1.3 Method of test . 80g36.3.2 Total power dynamic range 80g36.3.2.1 Definition and applicability . 80g36.3.2.2 Minimum Requirement . 80g36.3.2.3 Test purpose 80g36.3.2.4 Method of test . 80g36.3.2.4.1 Initial conditions 80g36.3.2.4.2 Procedure . 80g3
33、6.3.2.5 Test Requirement 81g36.4 Transmit ON/OFF power . 81g36.4.1 Transmitter OFF power 81g36.4.1.1 Definition and applicability . 81g36.4.1.2 Minimum Requirement . 81g36.4.1.3 Test purpose 82g36.4.1.4 Method of test . 82g36.4.1.4.1 Void . 82g36.4.1.4.2 Void . 82g36.4.1.5 Test requirement . 82g36.4
34、.2 Transmitter transient period 82g36.4.2.1 Definition and applicability . 82g36.4.2.2 Minimum Requirement . 82g36.4.2.3 Test purpose 82g36.4.2.4 Method of test . 83g36.4.2.4.1 Initial conditions 83g36.4.2.4.2 Procedure . 83g36.4.2.5 Test requirement . 83g36.5 Transmitted signal quality 83g36.5.1 Fr
35、equency error . 84g36.5.1.1 Definition and applicability . 84g36.5.1.2 Minimum Requirement . 84g36.5.1.3 Test purpose 84g36.5.1.4 Method of test . 84g36.5.1.5 Test requirement . 84g36.5.2 Error Vector Magnitude 84g36.5.2.1 Definition and applicability . 84g36.5.2.2 Minimum Requirement . 84g36.5.2.3
36、Test purpose 85g36.5.2.4 Method of test . 85g36.5.2.4.1 Initial conditions 85g36.5.2.4.2 Procedure . 85g36.5.2.5 Test requirement . 85g36.5.3 Time alignment error 86g3ETSI ETSI TS 136 141 V11.14.0 (2016-01)63GPP TS 36.141 version 11.14.0 Release 116.5.3.1 Definition and applicability . 86g36.5.3.2 M
37、inimum Requirement . 86g36.5.3.3 Test Purpose 86g36.5.3.4 Method of Test 86g36.5.3.4.1 Initial Conditions . 86g36.5.3.4.2 Procedure . 86g36.5.3.5 Test Requirement 87g36.5.4 DL RS power 87g36.5.4.1 Definition and applicability . 87g36.5.4.2 Minimum Requirement . 87g36.5.4.3 Test purpose 87g36.5.4.4 M
38、ethod of test . 87g36.5.4.4.1 Initial conditions 87g36.5.4.4.2 Procedure . 88g36.5.4.5 Test requirement . 88g36.6 Unwanted emissions . 88g36.6.1 Occupied bandwidth . 88g36.6.1.1 Definition and applicability . 88g36.6.1.2 Minimum Requirements 89g36.6.1.3 Test purpose 89g36.6.1.4 Method of test . 89g3
39、6.6.1.4.1 Initial conditions 89g36.6.1.4.2 Procedure . 89g36.6.1.5 Test requirements 90g36.6.2 Adjacent Channel Leakage power Ratio (ACLR) 90g36.6.2.1 Definition and applicability . 90g36.6.2.2 Minimum Requirement . 90g36.6.2.3 Test purpose 90g36.6.2.4 Method of test . 91g36.6.2.4.1 Initial conditio
40、ns 91g36.6.2.4.2 Procedure . 91g36.6.2.5 Test Requirement 91g36.6.2.6 Cumulative ACLR test requirement in non-contiguous spectrum 93g36.6.3 Operating band unwanted emissions 94g36.6.3.1 Definition and applicability . 94g36.6.3.2 Minimum Requirement . 95g36.6.3.3 Test purpose 95g36.6.3.4 Method of te
41、st . 95g36.6.3.4.1 Initial conditions 95g36.6.3.4.2 Procedure . 95g36.6.3.5 Test requirement . 96g36.6.3.5.1 Test requirements for Wide Area BS (Category A). 97g36.6.3.5.2 Test requirements for Wide Area BS (Category B) . 101g36.6.3.5.2.1 Category B test requirements (Option 1) . 101g36.6.3.5.2.2 Ca
42、tegory B (Option 2) . 105g36.6.3.5.2A Test requirements for Local Area BS (Category A and B) 107g36.6.3.5.2B Test requirements for Home BS (Category A and B) 110g36.6.3.5.2C Test requirements for Medium Range BS (Category A and B) . 111g36.6.3.5.3 Additional requirements 115g36.6.4 Transmitter spuri
43、ous emissions . 118g36.6.4.1 Definition and applicability . 118g36.6.4.2 Minimum Requirements 118g36.6.4.3 Test Purpose 118g36.6.4.4 Method of Test 118g36.6.4.4.1 Initial conditions 118g36.6.4.4.2 Procedure . 119g36.6.4.5 Test requirements 119g36.6.4.5.1 Spurious emissions (Category A) 119g36.6.4.5.
44、2 Spurious emissions (Category B) 120g36.6.4.5.3 Protection of the BS receiver of own or different BS 120g36.6.4.5.4 Co-existence with other systems in the same geographical area . 120g36.6.4.5.5 Co-location with other base stations 129g3ETSI ETSI TS 136 141 V11.14.0 (2016-01)73GPP TS 36.141 version
45、 11.14.0 Release 116.7 Transmitter intermodulation . 136g36.7.1 Definition and applicability 136g36.7.2 Minimum Requirement . 136g36.7.2A Additional requirement for Band 41 . 136g36.7.3 Test purpose 137g36.7.4 Method of test . 137g36.7.4.1 Initial conditions . 137g36.7.4.2 Procedures . 137g36.7.5 Te
46、st Requirements 138g36.7.6 Additional test requirements for Band 41 . 138g37 Receiver characteristics 138g37.1 General . 138g37.2 Reference sensitivity level 139g37.2.1 Definition and applicability 139g37.2.2 Minimum Requirement . 139g37.2.3 Test purpose 139g37.2.4 Method of testing 139g37.2.4.1 Ini
47、tial conditions . 139g37.2.4.2 Procedure 139g37.2.5 Test requirement . 139g37.3 Dynamic range . 141g37.3.1 Definition and applicability 141g37.3.2 Minimum Requirement . 141g37.3.3 Test purpose 141g37.3.4 Method of testing 141g37.3.4.1 Initial conditions . 141g37.3.4.2 Procedure 141g37.3.5 Test Requi
48、rements 142g37.4 In-channel selectivity . 143g37.4.1 Definition and applicability 143g37.4.2 Minimum Requirement . 144g37.4.3 Test purpose 144g37.4.4 Method of testing 144g37.4.4.1 Initial conditions . 144g37.4.4.2 Procedure 144g37.4.5 Test Requirements 145g37.5 Adjacent Channel Selectivity (ACS) an
49、d narrow-band blocking . 146g37.5.1 Definition and applicability 146g37.5.2 Minimum Requirement . 147g37.5.3 Test purpose 147g37.5.4 Method of test . 147g37.5.4.1 Initial conditions . 147g37.5.4.2 Procedure for Adjacent Channel Selectivity . 147g37.5.4.3 Procedure for narrow-band blocking . 147g37.5.5 Test Requirements 148g37.6 Blocking . 152g37.6.1 Definition and applicability 152g37.6.2 Minimum Requirements . 152g37.6.3 Test purpose 152g37.6.4 Method of test . 152g37.6.4.1 Initial conditions . 152g37.6.4.2 Procedure 152g37.6.5 Test Requirements 153g37.6.5.1 General require
