1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelCircuit Tby a Public L(3GPP TS 22.0TECHNICAL SPECIFICATION122 003 V13.0.0 (2016communications system (Phaelecommunications System (LTE; t Teleservices supported Land Mobile Network (PLMN).003 version 13.0.0 Release 1316-02) hase 2+); (UMTS); N) )
2、ETSI ETSI TS 122 003 V13.0.0 (2016-02)13GPP TS 22.003 version 13.0.0 Release 13Reference RTS/TSGS-0122003vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but
3、 non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions
4、 of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specifi
5、c network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in
6、 the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as
7、 authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTT
8、M, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM As
9、sociation. ETSI ETSI TS 122 003 V13.0.0 (2016-02)23GPP TS 22.003 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for
10、 ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https
11、:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essent
12、ial to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpret
13、ed as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“,
14、“will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 003 V13.0.0 (2016-02)33
15、GPP TS 22.003 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g30 Scope 5g30.1 Normative references . 5g30.2 Abbreviations . 5g31 Framework for describing circuit teleservices supported . 6g32 List of the teleservice attributes 7
16、g33 List of teleservice categories and individual teleservices . 7g34 Description of individual teleservices 7g35 Bearer capabilities supporting teleservices 8g3Annex A (normative): Description of individual Teleservices . 9g3A.1 Individual Teleservices. 9g3A.1.1 Telephony . 9g3A.1.2 Emergency calls
17、 . 11g3A.1.3 Short Message Service (SMS) 12g3A.1.3.1 Short message service MT/PP 12g3A.1.3.2 Short message service MO/PP 13g3A.1.3.3 Cell Broadcast Service (CBS) . 14g3A.1.3.4 Short message service description 14g3A.1.4 Alternate speech/facsimile G3 17g3A.1.4 Alternate speech/facsimile G3 17g3A.1.5
18、Automatic facsimile G3 18g3A.1.6 Voice Group Call Service . 19g3A.1.7 Voice Broadcast Service 20g3Annex B (informative): Change history . 21g3History 22g3ETSI ETSI TS 122 003 V13.0.0 (2016-02)43GPP TS 22.003 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdG
19、eneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release d
20、ate and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. techn
21、ical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 003 V13.0.0 (2016-02)53GPP TS 22.003 version 13.0.0 Release 130 Scope This Technical Specification (TS) describes and defines a recommen
22、ded set of Circuit Teleservices to be supported by a PLMN in connection with other networks as a basis for defining the network capabilities required. 0.1 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of the present docum
23、ent. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (includi
24、ng a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“ 2 3GPP TS 22.001: “ Principles of circuit telecommunication services supported by a Public Land Mo
25、bile Network (PLMN)“. 3 3GPP TS 22.002: “Circuit Bearer Services (BS) supported by a Public Land Mobile Network (PLMN)“. 4 3GPP TS 22.004: “ General on supplementary services“. 5 3GPP TS42.068 : “Voice Group Call Service (VGCS) - Stage 1“. 6 3GPP TS 42.069 : “Voice Broadcast Service (VBS) - Stage 1“
26、. 7 3GPP TS 23.040: “ Technical realization of the Short Message Service (SMS) Point-to-Point (PP)“. 8 3GPP TS 23.041 : “ Technical realization of Short Message Service Cell Broadcast (SMSCB)“. 9 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 10 3GPP TS 27.001 : “ General on Termina
27、l Adaptation Functions (TAF) for Mobile Stations (MS)“. 11 3GPP TS 27.005: “ Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)“. 12 ITU-T Recommendation T.4: “Standardization of group 3 facsimile
28、 apparatus for document transmission“. 13 ITU-T Recommendation T.30: “Procedures for document facsimile transmission in the general switched telephone network“. 14 3GPP TS 22.101: “Service Principles“. 0.2 Abbreviations Abbreviations used in this TS are listed in 3GPP TR 21.9051. ETSI ETSI TS 122 00
29、3 V13.0.0 (2016-02)63GPP TS 22.003 version 13.0.0 Release 131 Framework for describing circuit teleservices supported Teleservices supported by a PLMN are described by a number of attributes which are intended to be largely independent. These attributes are described and defined in specification 3GP
30、P TS 22.001 2. They are grouped into three categories: - High layer attributes; - Low layer attributes (describing the Bearer capabilities which support the Teleservice). - information transfer attributes; - access attributes. - General attributes. Figure 1 shows the relationship between the differe
31、nt categories of services attributes, and their scope within a Teleservice. TE TELow layer attributes(=bearer capability)High layer attributesPossibletransit networkTerminating networkPLMN(originating network)NOTE 1: A transit network may not exist. NOTE 2: Communication may be established from both
32、 ends in principle. Figure 1: Relationship between the categories of services attributes and their scope within a Teleservice ETSI ETSI TS 122 003 V13.0.0 (2016-02)73GPP TS 22.003 version 13.0.0 Release 132 List of the teleservice attributes Table 1 gives the list of the attributes. For the definiti
33、ons and possible values of these attributes, see 3GPP TS 22.001 2. Table 1: List of Teleservice attributes 1. High layer capabilities 1.1 Type of user information 1.2 Layer 4 protocol functions 1.3 Layer 5 “ “ 1.4 Layer 6 “ “ 1.5 Layer 7 “ “ Dominant Teleservice attribute category Secondary attribut
34、es “ “ 2. Low layer capabilities (describing the Bearer capability which supports the Teleservice) 2.1 Information transfer 2.1.1 Information transfer capabilities 2.1.2 Information transfer mode 2.1.3 Information transfer rate 2.1.4 Structure 2.1.5 Establishment of communication 2.1.6 Communication
35、 configuration 2.1.7 Symmetry “ “ “ “ “ “ Individual services (in the category) 2.2 Access (3GPP TS 22.001) 2.2.1 Signalling access 2.2.2 Information access 2.3 Interworking 2.3.1 Terminating network type 2.3.2 National/international interworking 2.3.3 Interface of terminal equipment Qualifying attr
36、ibutes “ “ “ “ “ “ “ “ Further specify the individual services 3. General 3.1 Supplementary services provided 3.2 Quality of service 3.3 Operational and commercial 3 List of teleservice categories and individual teleservices Table 2 presents a list of all Teleservices categories and of individual Te
37、leservices and the associated dominant and secondary attributes. 4 Description of individual teleservices The annex contains a data sheet per Teleservice with all attributes and comments. ETSI ETSI TS 122 003 V13.0.0 (2016-02)83GPP TS 22.003 version 13.0.0 Release 135 Bearer capabilities supporting
38、teleservices According to specification 3GPP TS 22.001 2 the Bearer Capability defines the technical features of a Teleservice as they appear to the user at the customer access point or an appropriate interface of a fixed network. The Bearer Capability is characterized by information transfer, acces
39、s and interworking attributes. The same set of attributes as for a Bearer Service is used. A Bearer Capability is associated with every Teleservice. Table 2: Teleservice categories and Teleservices Dominant attribute Category of teleservice Individual Teleservice Type of user in- formation No Name N
40、o Name Speech 1 Speech trans-mission 11 12 Telephony Emergency Calls Short message 2 Short message service 21 22 23 Short message MT/PP Short message MO/PP Cell Broadcast Service Facsimile 6 Facsimile trans - 61 Alternate speech and facsimile group 3 T1NT2mission 62 Automatic Facsimile group 3 T1NT2
41、Speech 9 Voice Group service391 92 Voice Group Call Service Voice Broadcast Service Note 1: The transparent facsimile services apply to GERAN A/Gb mode of operation only. Note 2: The non-transparent facsimile services apply to UTRAN only. Note 3: The Voice Group Services, TS 91 and TS 92 apply to GE
42、RAN A/Gb mode of operation only. ETSI ETSI TS 122 003 V13.0.0 (2016-02)93GPP TS 22.003 version 13.0.0 Release 13Annex A (normative): Description of individual Teleservices NOTE 1: Within the PLMN the “Information transfer rate“ attribute is not indicated. A.1 Individual Teleservices A.1.1 Telephony
43、Teleservice 11, Telephony 1. 1.1 Type or user information speech A HLC 1.2 Layer 4 protocol functions - T 1.3 Layer 5 protocol functions - T 1.4 Layer 6 protocol functions - R 1.5 Layer 7 protocol functions - I 2. 2.1 2.1.1 Information transfer capability speech (digital representation) B LLC 2.1.2
44、Information transfer mode circuit U Inform 2.1.3 Information transfer rate not applicable T transfer 2.1.4 Structure not applicable E 2.1.5 Establishment of connection demand MO MT S 2.1.6 Communication configuration point-to-point 2.1.7 Symmetry bidirectional symmetry 2.2 2.2.1 Signalling access ma
45、nual Access 2.2.2 Information access rate full rate/half rate at UE (3GPP TS 22.001) interface 2.3 2.3.1 Visible network type PSTN/ISDN/ -PLMN Inter- 2.3.2 National/Internat. interworking international/national working 2.3.3 Interface of TE to terminating 2 wire, analogue 4 wire S (B+B+D) ME 3. 3.1
46、Supplementary service provided 3GPP TS 22.004 Gen 3.2 Quality of service Comments: This service provides the transmission of speech information and audible signalling tones of the PSTN/ISDN. In the PLMN and the fixed network processing technique appropriate for speech such as analogue transmission,
47、echo cancellation and low bit rate voice encoding may be used. Hence, bit integrity is not assured. 1) Transparency for telephone signalling tones is provided. 2) Transparency for voice band facsimile signals is not mandatory. (Appropriate bearer services see 3GPP TS 22.002 3.) 3) Transparency for e
48、nd to end speech encryption is not mandatory. If a user needs to apply this technique an appropriate bearer service (3GPP TS 22.002 3) can be used. 4) Transmission of DTMF is provided in the mobile to fixed direction (e.g. for controlling voice mail boxes) during any time of an established call. ETS
49、I ETSI TS 122 003 V13.0.0 (2016-02)103GPP TS 22.003 version 13.0.0 Release 135) In A/Gb mode of operation (GERAN) speech teleservices may be provided using the Full Rate (full rate, version 1), Enhanced Full Rate (full rate, version 2), Half Rate (half rate, version 1), Adaptive Multirate (AMR) or Wideband Adaptive Multirate (AMR-WB) speech codecs. The default speech codec to provide speech service in this case is Full Rate. 6) In UTRAN operation speech teleservices may be provided using th
