1、 ETSI TS 101 823-3-3 V1.2.1 (2003-07)Technical Specification Broadband Radio Access Networks (BRAN);HIPERLAN Type 2;Conformance testing for the Data Link Control (DLC) layer;Part 3: Profile for business environment;Sub-part 3: Profile Test Specification (PTS) -Profile Specific Test Specification (PS
2、TS)floppy3 ETSI ETSI TS 101 823-3-3 V1.2.1 (2003-07) 2 Reference RTS/BRAN-002T0A4-3-3 Keywords access, ATS, DLC, HIPERLAN, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but
3、non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived di
4、fference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware
5、 that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No
6、part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the ben
7、efit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 101 823-3-3 V1.2.1 (2003-07) 3 Contents I
8、ntellectual Property Rights6 Foreword.6 1 Scope 7 2 References 7 3 Definitions and abbreviations.9 3.1 Definitions9 3.2 Abbreviations .9 4 Physical Layer - Business Environments .10 5 DLC protocol - Business Environments.10 5.1 Basic Data Transport Function.10 5.1.1 Test suite structure10 5.1.2 Addi
9、tional test purposes10 5.1.3 Abstract test method .10 5.1.4 Relevant test cases 10 5.1.5 Additional test cases .10 5.2 Radio Link Control (RLC) Sub-layer.10 5.2.1 Test suite structure10 5.2.2 Additional test purposes11 5.2.3 Abstract test method .11 5.2.4 Relevant test cases 11 5.2.5 Additional test
10、 cases .11 6 Packet based Convergence Layer - Business Environments12 6.1 Common part functions 12 6.1.1 Test suite structure12 6.1.2 Additional test purposes12 6.1.3 Abstract test method .12 6.1.4 Relevant test cases 12 6.1.5 Additional test cases .12 6.2 Ethernet Service Specific Convergence Subla
11、yer 12 6.2.1 Test suite structure12 6.2.2 Additional test purposes12 6.2.3 Abstract test method .12 6.2.4 Relevant test cases 13 6.2.5 Additional test cases .13 7 Network Management - Business Environments .13 Annex A (normative): Profile Implementation eXtra Information for Testing (IXIT) proforma.
12、14 A.1 Identification summary.14 A.2 ATS summary 14 A.3 Test laboratory14 A.4 Client identification15 A.5 SUT 15 A.6 IUT information .16 Annex B (normative): Profile Conformance Test Report (Profile CTR) proforma for MT side.26 B.1 Identification summary.26 ETSI ETSI TS 101 823-3-3 V1.2.1 (2003-07)
13、4 B.1.1 Protocol conformance test report26 B.1.2 IUT identification.26 B.1.3 Testing environment.27 B.1.4 Limits and reservation27 B.1.5 Comments.27 B.2 IUT conformance status .28 B.3 Static conformance summary .28 B.4 Dynamic conformance summary28 B.5 Static conformance review report.28 B.6 Test ca
14、mpaign report29 B.7 Observations.30 Annex C (normative): Profile Conformance Test Report (Profile CTR) proforma for AP/CC side .31 C.1 Identification summary.31 C.1.1 Protocol conformance test report31 C.1.2 IUT identification.31 C.1.3 Testing environment.32 C.1.4 Limits and reservation32 C.1.5 Comm
15、ents.32 C.2 IUT conformance status .33 C.3 Static conformance summary .33 C.4 Dynamic conformance summary33 C.5 Static conformance review report.33 C.6 Test campaign report34 C.7 Observations.35 Annex D (normative): System Conformance Test Report (SCTR) proforma36 D.1 Identification summary.36 D.1.1
16、 System conformance test report .36 D.1.2 Test laboratory36 D.1.3 Client identification37 D.1.4 System Under Test (SUT) 37 D.1.5 Profile identification.37 D.1.6 Nature of conformance testing .38 D.1.7 Limits and reservations 38 D.1.8 Record of agreement 38 D.1.9 Comments.39 D.2 System report summary
17、 for BRAN HIPERLAN Type 2 - Extension for Home Environment39 D.2.1 Profile testing summary39 D.2.1.1 Physical Layer 39 D.2.1.2 DLC protocol; Basic Data Transport Function .40 D.2.1.3 DLC protocol; Radio Link Control (RLC) Sub-layer .41 D.2.1.4 Packet based Convergence Layer; Common part .42 D.2.1.5
18、Packet based Convergence Layer; Ethernet Service Specific Convergence Sublayer43 D.2.1.6 Network Management.44 Annex E (normative): System Conformance Statement (SCS) proforma 45 E.1 Identification summary.45 E.1.1 SCS identification.45 E.1.2 IUT identification.45 E.1.3 Client identification46 ETSI
19、ETSI TS 101 823-3-3 V1.2.1 (2003-07) 5 E.1.4 Supplier identification 46 E.1.5 Manufacturer identification47 E.1.6 Protocols identification.47 E.1.7 Profile identification.47 E.2 Miscellaneous system information.48 E.2.1 Configuration .48 E.2.2 Other information.48 Annex F (normative): Abstract Test
20、Suite (ATS) .49 F.1 The TTCN Graphical form (TTCN.GR) 49 F.2 The TTCN Machine Processable form (TTCN.MP)49 History 50 ETSI ETSI TS 101 823-3-3 V1.2.1 (2003-07) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The informati
21、on pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI
22、 Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 3
23、14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Project Broadband Radio Access Networks (BRAN). The present document is part 3, sub-part 3 of a multi-part deliverab
24、le. Full details of the entire series can be found in part 1, sub-part 1 14. ETSI ETSI TS 101 823-3-3 V1.2.1 (2003-07) 7 1 Scope The present document contains the Abstract Test Suite (ATS) to test the Broadban Radio Access Networks (BRAN) HIPERLAN Type 2; Data Link Control (DLC) layer; Profile for b
25、usiness environment. The objective of the present document is to provide a basis for conformance tests for Broadban Radio Access Networks (BRAN) HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers. The ISO standard for the methodolog
26、y of conformance testing (ISO/IEC 9646-1 22 and ISO/IEC 9646-2 23) as well as the ETSI rules for conformance testing (ETS 300 406 21) are used as a basis for the test methodology. Annex A provides the Profile Implementation eXtra Information for Testing (IXIT) proforma of the ATS. Annex B provides t
27、he Profile Conformance Test Report (Profile CTR) proforma of the MT side ATS. Annex C provides the Profile Conformance Test Report (Profile CTR) proforma of the AP/CC side ATS. Annex D provides the System Conformance Test Report (SCTR) proforma. Annex E provides the System Conformance Statement (SCS
28、) proforma. Annex F provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication
29、and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.e
30、tsi.org/Reference. 1 ETSI TS 101 475 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Physical (PHY) Layer“. 2 ETSI TS 101 761-1 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 1: Basic Data Transport Functions“. 3 ETSI TS 10
31、1 761-2 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 2: Radio Link Control (RLC) Sublayer“. 4 ETSI TS 101 761-3 (V1.2.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 3: Profile for Business E
32、nvironment“. 5 ETSI TS 101 493-1 (V1.1.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Packet based Convergence Layer; Part 1: Common part“. 6 ETSI TS 101 493-2 (V1.2.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Packet based Convergence Layer; Part 2: Ethernet Service
33、Specific Convergence Sublayer (SSCS)“. 7 ETSI TS 101 762 (V1.1.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Network Management“. ETSI ETSI TS 101 823-3-3 V1.2.1 (2003-07) 8 8 ETSI TS 101 811-1-1 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing
34、for the packet based convergence layer; Part 1: Common Part; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma“. 9 ETSI TS 101 811-1-2 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Commo
35、n Part; Sub-part 2: Test Suite Structure and Test Purposes (TSS HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Common Part; Sub-part 3: Abstract Test Suite (ATS) specification“. 11 ETSI TS 101 811-2-1 (V1.2.1): “Broadband Radio Access Networks (BRAN); HIPERLAN T
36、ype 2; Conformance testing for the packet based convergence layer; Part 2: Ethernet Service Specific Convergence Sublayer (SSCS); Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma “. 12 ETSI TS 101 811-2-2 (V1.2.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Co
37、nformance testing for the packet based convergence layer; Part 2: Ethernet Service Specific Convergence Sublayer (SSCS); Sub-part 2: Test Suite Structure and Test Purposes (TSS HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 2: Ethernet Service Specific Convergence
38、Sublayer (SSCS); Sub-part 3: Abstract Test Suite (ATS) specification“. 14 ETSI TS 101 823-1-1 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 1: Basic data transport functions; Sub-part 1: Protocol Implementation Con
39、formance Statement (PICS) proforma“. 15 ETSI TS 101 823-1-2 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 1: Basic data transport functions; Sub-part 2: Test Suite Structure and Test Purposes (TSS HIPERLAN Type 2;
40、Conformance testing for the Data Link Control (DLC) layer; Part 1: Basic data transport functions; Sub-part 3: Abstract Test Suite (ATS) specification“. 17 ETSI TS 101 823-2-1 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) laye
41、r; Part 2: Radio Link Control (RLC) Sublayer; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma“. 18 ETSI TS 101 823-2-2 (V1.3.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 2: Radio Link Control (
42、RLC) Sublayer; Sub-part 2: Test Suite Structure and Test Purposes (TSS HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 2: Radio Link Control (RLC) Sublayer; Sub-part 3: Abstract Test Suite (ATS) specification“. 20 ETSI TS 101 823-3-1 (V1.2.1): “Broadband Radio Access
43、 Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 3: Profile for Business Environment; Sub-part 1: Profile Requirement List (PRL) proforma“. 21 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing sp
44、ecifications; Standardization methodology“. 22 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 23 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodolo
45、gy and framework - Part 2: Abstract Test Suite specification“. 24 ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation“. ETSI ETSI TS 101 823-3-3 V1.2.1 (2003-07) 9 25 ISO/IEC 9646-5: “
46、Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 5: Requirements on test laboratories and clients for the conformance assessment process“. 26 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodol
47、ogy and framework - Part 6: Protocol profile test specification“. 27 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statement“. 3 Definitions and abbreviations 3.1 Definitions For the purpose
48、s of the present document, the terms and definitions given in ISO/IEC 9646-7 27, TS 101 761-2 3 and TS 101 761-3 4 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 22, ISO/IEC 9646-6 26, ISO/IEC 9646-7 27, TS 101 761-2 3, TS 101 761-3 4 and
49、 the following apply: ACF Association Control Function ACH Access feedback CHannel AP Access Point APT Access Point Transceiver ARQ Automatic Repeat Request BCH Broadcast CHannel CA Capability tests CC Central Controller CL Convergence Layer CTR Conformance Test Report DFS Dynamic Frequency SelectionDLC Data Link Control DM Direct Mode DUC DLC User Connection IUT Implementation Under Test IXIT Implementation eXtra Information for Testing LCH Long CHannel MAC Medium Access Control MAC-ID MAC IDentifier M
