1、ETSI EG 201 901-2 1.1.1 (2001-05) ETSI Guide Broadband Integrated Services Digital Network (B-ISDN); Network integration testing; End-to-end testing; Part 2: Implementation Conformance (ICs) proforma, Implementation extra Information for Testing (IXIT) proforma and Abstract Test Suite (ATS) 2 ETSI E
2、G 201 901-2 V1.l.l (2001-05) Reference DEG/SPAN-130139-2 Keywords ATS, B-ISDN, PICS, testing ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 O0017 - NAF 742 C Association but non lucratif enregistre la Sous-prfec
3、ture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: htt!x/w.ettlsi. orq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such v
4、ersions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject t
5、o revision or change of status. Information on the current status of this and other ETSI documents is available at If you find errors in the present document, send your comment to: ed itoretsi .fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyri
6、ght and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2001. All rights reserved. ETSI 3 ETSI EG 201 901-2 V1.l.l (2001-05) Contents Intellectual Property Rights 5 Foreword 5 Introduction 5 1 Scope 6 2 References 6 3 Definitions and a
7、bbreviations 9 3.1 Definitions 9 3.2 Abbreviations 10 4 4.1 B-ISDN configurations 13 5 6 7 PCTR conformance 14 Abstract Test Method (ATM) 11 Untestable test purposes 14 ATS to TP map . 14 8 PIXIT conformance 14 9 ATS Conformance 14 Annex A (normative): A . 1 A . 1.1 Purposes and structure 15 A . 1.2
8、 Abbreviations and conventions 15 A . 1.3 Instructions for completing the ICs proforma . 16 Implementation Conformance Statement (ICs) proforma for Broadband End-to-end tests 15 Guidance for completing the ICs proforma . 15 . A . 2 A.2.1 A.2.2 A.2.3 A.2.4 A.2.5 A.2.6 A.2.7 A.2.8 Identification of th
9、e implementation 17 Date of the statement . 17 Implementation Under Test (IUT) identification 17 ICs contact person 17 Identification of the document . 18 Basic B-ISDN capabilities . 19 B-ISDN Supplementary services 22 Interworking with N-ISDN 24 B-ISDN Capability Set 2.1 26 Annex B (normative): Imp
10、lementation Extra Information (IXIT) proforma for Broadband B . 1 B.2 B.3 B.4 End-to-end tests . 28 Instructions for completing the IXIT proforma 28 Identification summary . 28 Abstract test suite summary 28 IXIT items 29 Annex C (normative): C . 1 C.i.1 C.1.2 IUT identification 32 C.1.3 Testing env
11、ironment 33 C.1.4 Limits and reservation . 33 Implementation Conformance Test Report (ICTR) proforma for Broadband End-to-end tests 32 Identification summary . 32 Implementation conformance test report 32 ETSI 4 ETSI EG 201 901-2 V1.l.l (2001-05) C . 1.5 C.2 C.3 Static conformance summary 34 C.4 Dyn
12、amic conformance summary . 34 C.5 Static conformance review report 35 C.6 Test campaign report 35 C.7 Observations . 41 Annex D (informative): Abstract Test Suite (ATS) 42 D.l D.2 History . 43 Comments . 34 IUT Conformance status . 34 The TTCN Graphical form (TTCN.GR) 42 The TTCN Machine Processable
13、 form (TTCN.MP) 42 ETSI 5 ETSI EG 201 901-2 V1.l.l (2001-05) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members
14、, and can be found in ETSI SR O00 3 14: “Intellectual Property Rights (IPRs); Essential, orpotentially Essential, IPRs notjed to ETSI in respect OfETSIstandards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (htt:/!wvw.etsi ordj r). Pursuant to th
15、e ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fo
16、reword This ETSI Guide (EG) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 2 of a multi-part deliverable covering the Network integration testing; End-to-end testing, as identified below: Part 1 : Part 2: “Test Suite St
17、ructure and Test Purposes (TSS “Implementation Conformance Statement (ICs) proforma, Implementation extra Information for Testing (MIT) proforma and Abstract Test Suite (ATS)“. Introduction The present document contains User-Network-Interface (UNI) to User-Network-Interface test specification for Ne
18、twork Integration Testing (NIT) required to veri6 the overall compatibility of B-ISDN and N-ISDN over nationalhnternational B-ISUP between networks. ETSI 6 ETSI EG 201 901-2 V1.l.l (2001-05) 1 Scope The present document provides a set of tests for testing B-ISDN compatibility and its interworking wi
19、th N-ISDN. Included are as well basic as supplementary services, checking basically the end-to-end characteristics. The following test subjects are covered: - support of basic services (CS1 and partly CS2.1 functionalities): normal call/connection including bearer services, HLULLI-transport and LLI-
20、negotiation, unsuccessful call setup, normal call release, deterministic bit rate, statistical bit rate and point-to-multipoint. The support of bandwidth negotiation, bandwidth modification and available bit rate will be covered in PIR 2.2; - support of supplementary services: CLIP/R, COLP/R, SUB, U
21、S, CUG; - support of interworking between B-ISDN and N-ISDN: basic call including normal connection, unsuccessful call setup, normal call release; support of interworking of supplementary services: CLIP/R, COLP/R, SUB, US, CUG. - The present document represents the output from the EURESCOM Project P
22、613 Task2. 2 Re fe re nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific refere
23、nce, subsequent revisions do not apply. For a non-specific reference, the latest version applies. il ETSI EN 300 443 (all parts): “Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification
24、 for basic call/bearer control“. ETSI ETS 300 403-1 (1995): “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1: Protocol specification ITU-T Recommendation Q.93 1 (1993), modi
25、fied“. ETSI ETS 300 771-1 (1997): “Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for point-to-multipoint call/bearer control; Part 1 : Protocol specification ITU-T Recommendati
26、on Q.2971 (1995), modified“. ETSI ETS 300 685 (1997): “Broadband Integrated Services Digital Network (B-ISDN); Usage of cause and location in Digital Subscriber Signalling System No. two (DSS2) and Signalling System No.7 B-ISDN User Part (B-ISUP) ITU-T Recommendation Q.2610 (1995), modified“. ETSI E
27、N 201 O1 8: “Integrated Services Digital Network (ISDN); Application of the Bearer Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC) information elements by terminals supporting ISDN services“. ETSI ETS 300 092-1 (1994): “Integrated Services Digital Network (ISDN); Ca
28、lling Line Identification Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol specification“. ETSI ETS 300 093-1 (1992): “Integrated Services Digital Network (ISDN); Calling Line Identification Restriction (CLIR) supplementary se
29、rvice; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol specification“. Pl 31 41 51 61 71 ETSI 7 ETSI EG 201 901-2 V1.l.l (2001-05) ETSI ETS 300 097-1 (1994): “Integrated Services Digital Network (ISDN); Connected Line Identification Presentation (COLP) supplementary s
30、ervice; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol specification“. ETSI ETS 300 098-1 (1992): “Integrated Services Digital Network (ISDN); Connected Line Identification Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS 1)
31、 protocol; Part 1: Protocol specification“. ETSI ETS 300 061-1 (1991): “Integrated Services Digital Network (ISDN); Subaddressing (SUB) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1 : Protocol specification“. ETSI ETS 300 286-1 (1996): “Integrated Servi
32、ces Digital Network (ISDN); User-to-User Signalling (US) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1 : Protocol specification“. ETSI ETS 300 138-1 (1996): “Integrated Services Digital Network (ISDN); Closed User Group (CUG) supplementary service; Digi
33、tal Subscriber Signalling System No. one (DSS 1) protocol; Part 1 : Protocol specification“. ITU-T Recommendation Q.2660: “Interworking between signalling system No. 7 broadband ISDN User Part (B-ISUP) and narrow-band ISDN User Part (N-ISUP)“. ETSI ETS 300 663-1 (1996): “Broadband Integrated Service
34、s Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Calling Line Identification Presentation (CLIP) supplementary service; Part 1 : Protocol specification ITU-T Recommendation Q.295 1, clause 3 (1995), modified“. ETSI ETS 300 664-1 (1996): “Broadband Integrated
35、Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Calling Line Identification Restriction (CLIR) supplementary service; Part 1 : Protocol specification ITU-T Recommendation Q.295 1, clause 4 (1995), modified“. ETSI ETS 300 665-1 (1996): “Broadband Integ
36、rated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connected Line Identification Presentation (COLP) supplementary service; Part 1 : Protocol specification ITU-T Recommendation Q.2951, clause 5 (1995), modified“. ETSI ETS 300 666-1 (1996): “Broadba
37、nd Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connected Line Identification Restriction (COLR) supplementary service; Part 1 : Protocol specification ITU-T Recommendation Q.295 1, clause 6 (1995), modified“. ETSI ETS 300 667-1 (1996):
38、“Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Subaddressing (SUB) supplementary service; Part 1: Protocol specification ITU-T Recommendation Q.295 1, clause 8 (1995), modified l. ETSI ETS 300 668-1 (1996): “Broadband Integrated
39、 Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; User-to-User Signalling (US) supplementary service; Part 1 : Protocol specification ITU-T Recommendation Q.2957, clause 1 (1995), modified“. ETSI ETS 300 770-1 (1998): “Broadband Integrated Services Dig
40、ital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Closed User Group (CUG) supplementary service; Part 1: Protocol specification ITU-T Recommendation Q.2955.1 (1996), modified“. ETSI EN 301 068-1 (V1.2.4): “Broadband Integrated Services Digital Network (B-ISDN); Dig
41、ital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication; Part 1 : Protocol specification ITU-T Recommendations Q.2961.1 (1995), Q.2961.2 (1997), Q.2961.3 (1997), Q.2961.4 (1997), modified l. ETSI 8 ETSI EG 201 90
42、1-2 V1.l.l (2001-05) i221 i231 i241 i251 i271 i291 i3 01 i3 11 i321 i331 i341 i3 61 i371 i3 81 i3 91 i401 i411 i421 i43 1 ETSI EN 301 067-1 (Vi. 1.3): “Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Ne
43、gotiation during call/connection establishment phase; Part 1: Protocol specification ITU-T Recommendation Q.2962 (1 996), modified“. ATM Forum: User-Network Interface (UNI) Specification Version 3.1 (9- 1994). ISO/IEC 9646- 1 (1 994): “Information technology - Open Systems Interconnection - Conforma
44、nce testing methodology and framework - Part 1: General concepts“. ISO/IEC 9646-2 (1 994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. ISO/IEC 9646-4 (1 994): “Information technology - Open Syste
45、ms Interconnection - Conformance testing methodology and framework - Part 4: Test realization“. ISO/IEC 9646-5 (1 994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the conformance a
46、ssessment process I. ISO/IEC 9646-3 (1 992): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. ISO/IEC 9646-7 (1 995): “Information technology - Open Systems Interconnection - Conformance t
47、esting methodology and framework - Part 7: Implementation Conformance Statements“. ITU-T Recommendation Q.922: “ISDN data link layer specification for frame mode bearer services“. ITU-T Recommendation 1.432: “B-ISDN User-Network Interface - Physical layer specification“. ITU-T Recommendation 1.36 1
48、: “B-ISDN ATM layer specification“. ITU-T Recommendation 1.363: “B-ISDN ATM Adaptation Layer (AAL) specification“. ITU-T Recommendation Q.2 11 O: “B-ISDN ATM adaptation layer - Service specific connection oriented protocol (SSCOP)“. ITU-T Recommendation Q.276 1 : “Functional description of the B-ISD
49、N user part (B-ISUP) of signalling system No.7“. ITU-T Recommendation Q.2764: “Signalling System No. 7 B-ISDN User Part (B-ISUP) - Basic call procedures I. ITU-T Recommendation Q.272 1.1 : “B-ISDN user part - Overview of the B-ISDN Network Node Interface Signalling Capability Set 2, Step 1“. ITU-T Recommendation Q.2726: “B-ISDN user part“. ITU-T Recommendation Q.2730: “Signalling system No.7 B-ISDN user part (B-ISUP) - Supplementary services“. ITU-T Recommendation Q.2735: “Stage 3 description for community of interest supplementary services
