1、BSI Standards PublicationPD CEN ISO/TS 18234-2:2013Intelligent transport systems Traffic and travel informationvia transport protocol expertsgroup, generation 1 (TPEG1)binary data formatPart 2: Syntax, semantics and framingstructure (TPEG1-SSF)PD CEN ISO/TS 18234-2:2013Incorporating corrigendum Nove
2、mber 2013PD CEN ISO/TS 18234-2:2013 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN ISO/TS 18234-2:2013. It supersedes DD CEN ISO/TS 18234-2:2006 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intell
3、igent transport systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013
4、. Published by BSI Standards Limited 2013ISBN 978 0 580 84886 5ICS 03.220.01; 35.240.60Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 October 2013.Amendmen
5、ts/corrigenda issued since publicationDate Text affected30 November 2013 Implementation of ISO corrected text 01 November 2013: figure 4 and figure 5 updatedTECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18234-2 October 2013 ICS 35.240.60; 03.220.01 Supersedes CEN
6、 ISO/TS 18234-2:2006English Version Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013) Systmes intelligents de transport - Inf
7、ormations sur le trafic et le tourisme via les donnes de format binaire du groupe dexperts du protocole de transport, gnration 1 (TPEG1) - Partie 2: Structure de syntaxe, de smantique et de cadrage (TPEG1-SSF) (ISO/TS 18234-2:2013) Intelligente Transportsysteme - Reise- und Verkehrsinformation ber b
8、inre Datenstrme der Transport Protokoll Expertengruppe, 1. Generation (TPEG1) - Teil 2: Syntax, Semantik und Rahmenstruktur (TPEG1-SSF) (ISO/TS 18234-2:2013) This Technical Specification (CEN/TS) was approved by CEN on 15 July 2013 for provisional application. The period of validity of this CEN/TS i
9、s limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN
10、 and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national
11、standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia
12、, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means re
13、served worldwide for CEN national Members. Ref. No. CEN ISO/TS 18234-2:2013: EPD CEN ISO/TS 18234-2:2013CEN ISO/TS 18234-2:2013 (E)3ForewordThis document (CEN ISO/TS 18234-2:2013) has been prepared by Technical Committee ISO/TC 204“Intelligent transport systems“ in collaboration with Technical Commi
14、ttee CEN/TC 278 “Intelligent transport systems” the secretariat of which is held by NEN.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights
15、.This document supersedes CEN ISO/TS 18234-2:2006.According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finl
16、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO
17、/TS 18234-2:2013 has been approved by CEN as CEN ISO/TS 18234-2:2013 without any modification.PD CEN ISO/TS 18234-2:2013CEN ISO/TS 18234-2:2013 (E)ISO/TS 18234-2:2013(E) ISO 2013 All rights reserved iiiContents Page Foreword . v Introduction . v 1 Scope 1 2 Normative references 1 3 Abbreviated terms
18、 . 2 4 Design principles . 3 4.1 TPEG transmission . 3 4.2 TPEG layer model 4 5 Conventions and symbols 6 5.1 Conventions . 6 5.1.1 Byte ordering . 6 5.1.2 Method of describing the byte-oriented protocol 6 5.1.3 Reserved data fields 6 5.2 Symbols 6 5.2.1 Literal numbers 6 5.2.2 Variable numbers 6 5.
19、2.3 Implicit numbers 7 6 Representation of syntax . 7 6.1 General . 7 6.2 Data type notation . 7 6.2.1 Rules for data type definition representation . 7 6.2.2 Description of data type definition syntax 9 6.3 Application dependent data types . 10 6.3.1 Data structures 11 6.3.2 Using templates as inte
20、rfaces 12 6.3.3 Components . 13 6.4 Toolkits and external definition . 15 6.5 Application design principles 15 6.5.1 Variable data structures . 15 6.5.2 Re-usable and extendable structures . 15 6.5.3 Validity of declarative structures . 15 7 TPEG data stream description . 16 7.1 Diagrammatic hierarc
21、hy representation of frame structure . 16 7.2 Syntactical Representation of the TPEG Stream . 16 7.2.1 TPEG transport frame structure 16 7.2.2 TPEG service frame template structure 17 7.2.3 Service frame of frame type = 0 . 17 7.2.4 Service frame of frame type = 1 . 17 7.2.5 TPEG service component f
22、rame multiplex . 18 7.2.6 Interface to application specific frames 18 7.3 Description of data on Transport level 21 7.3.1 Syncword . 21 7.3.2 Field length 21 7.3.3 Header CRC 21 7.3.4 Frame type . 21 7.3.5 Synchronization method. 22 7.3.6 Error detection . 22 7.4 Description of data on Service level
23、 22 vForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for whic
24、h a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all ma
25、tters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circ
26、ulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish oth
27、er types of normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technical Spec
28、ification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a fu
29、rther three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn. Attention is drawn to the possibility tha
30、t some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TS 18234-2 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 278, Road transport and traffic tel
31、ematics, in collaboration with ISO Technical Committee ISO/TC 204, Intelligent transport systems, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This second edition cancels and replaces the first edition (ISO/TS 18234-2:2006). Clauses 5, 6 and 7 hav
32、e been technically revised. ISO/TS 18234 consists of the following parts, under the general title Intelligent transport systems Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format: Part 1: Introduction, numbering and versions (TPEG1-INV) Part
33、2: Syntax, semantics and framing structure (TPEG1-SSF) Part 3: Service and network information(TPEG1-SNI) Part 4: Road Traffic Message application (TPEG1-RTM) Part 5: Public Transport Information (PTI) application PD CEN ISO/TS 18234-2:2013ISO/TS 18234-2:2013 (E)ISO/TS 18234-2:2013(E) iv ISO 2013 Al
34、l rights reserved7.4.1 Encryption indicator 22 7.4.2 Service identification .22 7.5 Description of data on Service component level .23 7.5.1 Service component identifier .23 7.5.2 Field length .23 7.5.3 Service component frame header CRC .23 7.5.4 Service component frame data CRC23 Annex A (normativ
35、e) Character tables 24 A.1 Character tables .24 A.2 Reference character table index 24 Annex B (normative) Method for coding quantities of objects 25 B.1 Numag derivation .25 B.2 Numag table .26 Annex C (normative) CRC calculation 27 C.1 CRC calculation .27 C.2 ITU-T (formerly CCITT) CRC calculation
36、 in PASCAL .27 C.3 ITU-T (formerly CCITT) CRC calculation in C notation 28 Annex D (normative) Time calculation 29 D.1 Time calculation .29 D.2 Time calculation in C notation 29 Annex E (informative) A description of the TPEG byte-stream using C-type notation 32 E.1 Explanation .32 E.2 Definition of
37、 data elements .32 E.3 Definition of conditional expressions33 E.4 Byte-stream representation of the TPEG hierarchy .33 E.4.1 Definition of nextbyte function .33 E.4.2 Definition of next_start_code function 33 E.4.3 Definition of tpeg_stream function 34 vi Part 6: Location referencing applications P
38、art 7: Parking information (TPEG1-PK1) Part 8: Congestion and travel-time application (TPEG1-CTT) Part 9: Traffic event compact (TPEG1-TEC) Part 10: Conditional access information (TPEG1-CAI) Part 11: Location Referencing Container (TPEG1-LRC) This corrected version of ISO 18234-2:2013 incorporates
39、the following corrections: The quality of Figures 4 and 5 has been improved for legibility. PD CEN ISO/TS 18234-2:2013ISO/TS 18234-2:2013 (E)ISO/TS 18234-2:2013(E) ISO 2013 All rights reserved vForeword ISO (the International Organization for Standardization) is a worldwide federation of national st
40、andards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International o
41、rganizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules giv
42、en in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least
43、75 % of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish other types of normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement betwe
44、en technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for pub
45、lication if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confi
46、rmed, it is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible
47、for identifying any or all such patent rights. ISO/TS 18234-2 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 278, Road transport and traffic telematics, in collaboration with ISO Technical Committee ISO/TC 204, Intelligent transport systems, in accordance
48、 with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This second edition cancels and replaces the first edition (ISO/TS 18234-2:2006). Clauses 5, 6 and 7 have been technically revised. ISO/TS 18234 consists of the following parts, under the general title Intelligent t
49、ransport systems Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format: Part 1: Introduction, numbering and versions (TPEG1-INV) Part 2: Syntax, semantics and framing structure (TPEG1-SSF) Part 3: Service and network information(TPEG1-SNI) Part 4: Road Traffic Message application (TPEG1-RTM) Part 5: Public Transport Information (PTI) application ISO/TS 18234-2:2013(E) ISO 2013 All rights reserved iiiContents Page Foreword . v Introduction . v 1 Scope 1 2 Norm
