1、BRITISH STANDARD BS EN ISO 15761:2002 Incorporating Corrigendum No. 1 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries The European Standard EN ISO 15761:2002 has the status of a British Standard ICS 75.180.20 BS EN ISO 15761:2002 This Bri
2、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 10 March 2003 BSI 1 May 2003 ISBN 0 580 41406 X National foreword This British Standard is the official English language version of EN ISO 15761:2002. It is identical with ISO 15761:2002. It supersedes
3、BS 5352:1981 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PSE/7, Industrial valves, to Subcommittee PSE/7/9, Valves for the petroleum industry, which has the responsibility to: A list of organizations represented on this subcommittee can be obtaine
4、d on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of
5、the BSI Electronic Catalogue or of British Standards Online. This Publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid e
6、nquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This
7、document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 36, the Annex ZA page and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued.
8、 Amendments issued since publication Amd. No. Date Comments 14475 Corrigendum No. 1 1 May 2003 Correction to EN ISO foreword page and addition of Annex ZA pageEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO15761 December2002 ICS75.180.20 Englishversion Steelgate,globeandcheckvalvesforsizesDN100
9、and smaller,forthepetroleumandnaturalgasindustries(ISO 15761:2002) Robinetsvannes,robinetssoupapeetclapetsdenon retourenacierdedimensionsDN100etinfrieures,pour lesindustriesduptroleetdugaznaturel(ISO 15761:2002) ThisEuropeanStandardwasapprovedbyCENon7November2002. CENmembersareboundtocomplywiththeCE
10、N/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexists
11、inthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finl
12、and,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploi
13、tationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO15761:2002ECORRECTED20030409 Foreword Thisdocument(ENISO15761:2002)hasbeenpreparedbyTechnicalCommitteeISO/TC153 “Valves“incollaborationwithTechnicalCommitteeCEN/TC12“Materials,equipmentand offshorestructuresforpetroleum
14、andnaturalgasindustries“,thesecretariatofwhichisheldby AFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationof anidenticaltextorbyendorsement,atthelatestbyJune2003,andconflictingnational standardsshallbewithdrawnatthelatestbyJune2003. AccordingtotheCEN/CENELECIntern
15、alRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg, Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnitedKingdom. Endorse
16、mentnotice ThetextofISO15761:2002hasbeenapprovedbyCENasENISO15761:2002withoutany modifications. NOTENormativereferencestoInternationalStandardsarelistedinAnnexZA(normative). ENISO15761:2002 INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Reference number ISO 15761:2002(E) Steel gate, globe
17、 and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets soupape et clapets de non-retour en acier de dimensions DN 100 et infrieures, pour les industries du ptrole et du gaz naturelENISO15761:2002 ii FDP dicslaimre This FDP fam elitnoc y
18、t deddebme niayfep.seca In roccatiw ecnadA hycilop gnisnecil sebod, thf sim eliarp eb ytnieiv ro dewb detu sllah ton eb tidesselnu de tt ehyfepseca hwich rae meil era deddebct desnetsni dna olat no delmoc ehtupre epfrromign tide ehti.gn In odaolnwt gnidihs file, rapticca setpe trehiet neh serilibisn
19、opty fo ton fnirisebodA gnign ilop gnisnecilcy. TI ehSO tneCrceS larteraita catpecon s illibaity it nihs aera. ebodA si t armedarak fo dAS ebotsysme Inroctarop.de teDailfo s tfos ehtware prtcudos t desuo crtaet ehFDP si ff eb nac elit ni dnuoG ehlarene Info talerive to tf eh;eli teh PDF-rctaerap noi
20、mateers weer tpof dezimior rptnii.gn vErec yaeeb sah ert nakt neo rusnet etah tf ehi elis tiusbaf elob esu ry ISO merebm seidob. In the kilnuley evtne ttah a borpmel talerign to ti f si,dnuo saelpfni erom teh tneCS larterceratai ta thserdda es igvne olebw. ISO 2002 Ar llieser sthgrvsselnU .de torehc
21、eps esiwfi,dei rap ont iht fos bupliactim noarper eb yro decudo tuzilina ni dey from b roy nasnaem y, tcelernahcem ro cinoicla, inclidung tohppocoying m dnaicrfomli, tiwtuoh permini noiss wrtif gnirmo ietI rehSO ta tserdda eheb slow or SIsO memreb ydob in toc ehtnury fo tr ehtseuqeer. ISO copyrithg
22、fofiec tsop esaCela 65 G 1121-HCeneva 02 T.le + 22 14 10 947 11 Fxa + 14 47 2290 9 74 E-liam cpoyrigthsio.ch Web wwwsi.oc.h ENISO15761:2002 iii Contents Page 1 Scope . 1 2 Normative references . 1 3 Terms and definitions 3 4 Pressure/temperature ratings . 3 4.1 Valve ratings 3 4.2 Temperature constr
23、aints 4 5 Design 4 5.1 Reference design 4 5.2 Flow passageway 4 5.3 Wall thickness 4 5.4 Valve body . 5 5.5 Valve bonnet or cover 9 5.6 Obturator . 10 5.7 Stem 11 5.8 Stem nut or stem bushing 12 5.9 Packing, packing chamber and gland 13 5.10 Packing retention . 13 5.11 Hand wheel 13 6 Materials . 14
24、 6.1 Trim materials 14 6.2 Materials other than trim 14 7 Marking . 14 7.1 Legibility . 14 7.2 Body marking . 17 7.3 Ring joint groove marking 17 7.4 Identification plate marking 17 8 Testing and inspection 17 8.1 Pressure tests 17 8.2 Inspection 19 9 Preparation for despatch 19 Annexes A Requiremen
25、ts for extended body gate valve bodies . 21 B Requirements for valves with bellows stem seals. 25 C Type testing of bellows stem seals 28 D Identification of valve parts . 31 E Information to be specified by the purchaser 34 Bibliography. 36 ENISO15761:2002 iv Foreword ISO (the International Organiz
26、ation for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established
27、 has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. I
28、nternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of th
29、e member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 15761 was prepared by Techni
30、cal Committee ISO/TC 153, Valves, Subcommittee SC 1, Design, manufacture, marking and testing. Annexes A, B and C form a normative part of this International Standard. Annexes D and E are for information only. ENISO15761:2002 v Introduction The purpose of this International Standard is to establish
31、basic requirements and practices for socket-welding, butt- welding, threaded and flanged end, steel gate, globe and check valves with reduced body seat openings, whose general construction parallels that specified by the American Petroleum Institute standard API 602 1and the British Standard BS 5352
32、 2 . The form of this International Standard corresponds to ISO 6002 3and ISO 10434 4 . However, it is not the purpose of this International Standard to replace ISO 6002, ISO 10434 or any other International Standard not identified with petroleum or natural gas industry applications. ENISO15761:2002
33、 ANRETNIITOTS LANDNADRA ISO 67512002:1)E( Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries 1 Scope This International Standard specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural
34、gas industry applications. It is applicable to valves of nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80 and 100, corresponding to nominal pipe sizes NPS , , , , 1, , , 2, , 3 and 4, and to pressure designations of Class 150, Class 300, Class 600, Class 800 and Class 1500. Class 800 is not a
35、listed class designation, but is an intermediate class number widely used for socket welding and threaded end compact valves. It includes provisions for the following valve characteristics: outside screw with rising stems (OS inside screw with rising stems (ISRS), in sizes and pressure designations
36、of Class ; socket welding or threaded ends, in sizes and pressure designations of Class800 and Class 1500; flanged or butt-welding ends, in sizes and pressure designations of , excluding flanged end Class 800; bonnet joint construction bolted, welded, threaded with seal weld, and union nut for nomin
37、al pressure rating Class ; body seat openings; materials, as specified; testing and inspection. This International Standard is applicable to valve end flanges in accordance with ASME B16.5 and valve body ends having tapered pipe threads to ISO 7-1 or ASME B1.20.1. It is applicable to extended body c
38、onstruction in sizesand pressure designations of Class 800 and Class 1500, and to bellows and bellows assembly construction as may be adaptable to gate or globe valves in sizes . It covers bellows stem seal type testing requirements. 2 Normative references The following normative documents contain p
39、rovisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to invest
40、igate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. 1/4 3/8 1/2 3/4 1 1/4
41、 1 1/2 2 1/2 8 DN 100 150 Class 1500 8 DN 65 800 8 DN 65 15 DN 100 150 Class 1500 800 15 DN 50 8 DN 50 ENISO15761:20021ISO :16751(2002)E 2 ISO 2002 Ar llithgr seresvde ISO 7-1, Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation ISO 7-2, Pi
42、pe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges ISO 2902, ISO metric trapezoidal screw threads General plan ISO 2903, ISO metric trapezoidal screw threads Tolerances ISO 2904, ISO metric trapezoidal screw threads Basic dimensions ISO 5208,
43、 Industrial valves Pressure testing of valves ISO 5209, General purpose industrial valves Marking ISO 5752, Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions ISO 6708:1995, Pipework components Definition and selection of DN (nominal size) ISO 9606-1, Approval te
44、sting of welders Fusion welding Part 1: Steels ISO 9956-1, Specification and approval of welding procedures for metallic materials Part 1: General rules for fusion welding ISO 9956-2, Specification and approval of welding procedures for metallic materials Part 2: Welding procedure specification for
45、arc welding ISO 9956-3, Specification and approval of welding procedures for metallic materials Part 3: Welding procedure tests for arc welding of steels ISO 9956-4, Specification and approval of welding procedures for metallic materials Part 4: Welding procedure tests for the arc welding of alumini
46、um and its alloys ISO 9956-5, Specification and approval of welding procedures for metallic materials Part 5: Approval by using approved welding consumables for arc welding EN 10269, Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties ASME 1) B1.5, Acme s
47、crew threads ASME B1.8, Stub Acme screw threads ASME B1.20.1, Pipe threads, general purpose (inch) ASME B16.5, Pipe flanges and flanged fittings ASME B16.10, Face-to-face and end-to-end dimensions of valves ASME B16.34:1996, Valves Flanged, threaded and welding end ASME, Boiler and Pressure Vessel C
48、ode, Section IX, Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators ASTM A193, Standard specification for alloy-steel and stainless steel bolting materials for high-temperature service 1) American Society of Mechanical Engineers ENISO15761:20022ISO 67512002:1)E(
