1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Reference conditions and procedures for testing industrial and process measurement transmittersPart 2: Specific procedures for pressure transmitters (IEC 62828-2:2017)BS EN 62828-2:2018EUROPEAN STANDARD NORME EUROPENNE
2、EUROPISCHE NORM EN IEC 62828-2 February 2018 ICS 17.100; 25.040.40 English Version Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (IEC 62828-2:2017) Conditions de rfrence et procdures pour lessai
3、 des transmetteurs de mesure industrielle et de processus - Partie 2: Procdures spcifiques pour les transmetteurs de pression (IEC 62828-2:2017) Referenzbedingungen und Testmethoden fr Industrie- und Prozessmessgrenumformer - Teil 2: Spezielle Testmethoden fr Druckmessumformer (IEC 62828-2:2017) Thi
4、s European Standard was approved by CENELEC on 2017-12-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref
5、erences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of
6、 a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Y
7、ugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotec
8、hnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Re
9、f. No. EN IEC 628208-2:2018 E National forewordThis British Standard is the UK implementation of EN IEC 628282:2018. It is identical to IEC 628282:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/65/2, Elements of systems.A list of organizations represented on th
10、is committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 83874 3ICS
11、 17.100; 25.040.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDA
12、RDBS EN 628282:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62828-2 February 2018 ICS 17.100; 25.040.40 English Version Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (IEC 62828-2
13、:2017) Conditions de rfrence et procdures pour lessai des transmetteurs de mesure industrielle et de processus - Partie 2: Procdures spcifiques pour les transmetteurs de pression (IEC 62828-2:2017) Referenzbedingungen und Testmethoden fr Industrie- und Prozessmessgrenumformer - Teil 2: Spezielle Tes
14、tmethoden fr Druckmessumformer (IEC 62828-2:2017) This European Standard was approved by CENELEC on 2017-12-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
15、 alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lan
16、guage made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, th
17、e Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
18、the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by
19、 any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 628208-2:2018 E BS EN 628282:2018EN IEC 62828-2:2018 (E) 2 European foreword The text of document 65B/1098/FDIS, future edition 1 of IEC 62828-2, prepared by IEC/SC 65B “Measurement and control devices, of IEC technical committee 65:
20、 Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62828-2:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national sta
21、ndard or by endorsement (dop) 2018-09-12 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-12-12 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held res
22、ponsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62828-2:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standard
23、s indicated: IEC 60770 (all parts) NOTE Harmonized as EN 60770 (all parts). IEC 61298 (all parts) NOTE Harmonized as EN 61298 (all parts). IEC 61518:2000 NOTE Harmonized as EN 61518:2001(not modified). corrigendum Feb. 2002. IEC 61987-13:2016 NOTE Harmonized as EN 61987-13:2016 (not modified). IEC 6
24、2828 (all parts) NOTE Harmonized as EN 62828 (all parts). BS EN 628282:2018EN IEC 62828-2:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or a
25、ll of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modific
26、ations, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62828-1 - Reference conditions and procedures for testing industrial an
27、d process measurement transmitters - Part 1: General procedures for all types of transmitters EN IEC 62828-1 - BS EN 628282:2018This page deliberately left blank 2 IEC 62828-2:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 3.1 Genera
28、l . 7 3.2 Terms related the process conditions 9 4 General description of the device and overview . 9 5 Reference test conditions 9 6 Test procedures 10 6.1 General . 10 6.2 Tests at standard and operating reference test conditions. 10 6.2.1 General . 10 6.2.2 Accuracy test suitable for routine and
29、acceptance tests . 10 6.2.3 Overpressure . 11 6.2.4 Influence of static pressure 13 6.2.5 Long-term drift . 15 6.2.6 Leakage test 16 6.2.7 Additional tests for diaphragm/remote seals Influence of process temperature (long term) . 16 7 Test report and technical documentation . 16 7.1 General . 16 7.2
30、 Total probable error 17 Annex A (informative) Relationship between the SI unit and other pressure related units 18 Annex B (informative) Pressure process measurement transmitter (PMT) 19 B.1 General description of a pressure PMT . 19 B.2 Typical PMTs 19 Annex C (informative) Example of signal curre
31、nt range for a 4 to 20 mA PMT 21 C.1 Signal current range of a 4 mA to 20 mA transmitter (before adjustment) 21 C.2 Proportional range 21 C.3 Normal range 21 C.4 Underrange . 21 C.5 Overrange . 22 C.6 Low alarm . 22 C.7 High alarm 22 Bibliography 23 Figure 1 Measuring range and associated properties
32、 of a pressure PMT 8 Figure 2 Schematic example of a test set-up for pressure PMT 10 Figure 3 Example of measured error plot . 11 Figure 4 Procedure for the determination of the unilateral overpressure error 12 Figure 5 Schematic example of test set-up for determine the effect of the static pressure
33、 . 13 Figure 6 Procedure for the determination of the zero point error with static pressure . 14 2 IEC 62828-2:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 3.1 General . 7 3.2 Terms related the process conditions 9 4 General descri
34、ption of the device and overview . 9 5 Reference test conditions 9 6 Test procedures 10 6.1 General . 10 6.2 Tests at standard and operating reference test conditions. 10 6.2.1 General . 10 6.2.2 Accuracy test suitable for routine and acceptance tests . 10 6.2.3 Overpressure . 11 6.2.4 Influence of
35、static pressure 13 6.2.5 Long-term drift . 15 6.2.6 Leakage test 16 6.2.7 Additional tests for diaphragm/remote seals Influence of process temperature (long term) . 16 7 Test report and technical documentation . 16 7.1 General . 16 7.2 Total probable error 17 Annex A (informative) Relationship betwe
36、en the SI unit and other pressure related units 18 Annex B (informative) Pressure process measurement transmitter (PMT) 19 B.1 General description of a pressure PMT . 19 B.2 Typical PMTs 19 Annex C (informative) Example of signal current range for a 4 to 20 mA PMT 21 C.1 Signal current range of a 4
37、mA to 20 mA transmitter (before adjustment) 21 C.2 Proportional range 21 C.3 Normal range 21 C.4 Underrange . 21 C.5 Overrange . 22 C.6 Low alarm . 22 C.7 High alarm 22 Bibliography 23 Figure 1 Measuring range and associated properties of a pressure PMT 8 Figure 2 Schematic example of a test set-up
38、for pressure PMT 10 Figure 3 Example of measured error plot . 11 Figure 4 Procedure for the determination of the unilateral overpressure error 12 Figure 5 Schematic example of test set-up for determine the effect of the static pressure . 13 Figure 6 Procedure for the determination of the zero point
39、error with static pressure . 14 BS EN 628282:2018IEC 62828-2:2017 IEC 2017 3 Figure 7 Procedure for the determination of the span error for static pressure . 15 Figure B.1 Schematic example of intelligent PMT model 20 Figure C.1 Signal current range of a 4 mA 20 mA transmitter (before adjustment) .
40、21 Table 1 Example of measured errors 11 Table A.1 Relationship between the SI unit and other pressure related units 18 BS EN 628282:2018 4 IEC 62828-2:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMI
41、TTERS Part 2: Specific procedures for pressure transmitters FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
42、operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred t
43、o as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this
44、preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
45、consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable effo
46、rts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicati
47、ons transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Inde
48、pendent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No
49、liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn
