1、MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged Edition, 2015)(IEC 63035:2017)BS EN 63035:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 63035 September 2017 ICS 33.160.30; 35.040.01; 3
2、5.200 English Version MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) (IEC 63035:2017) Midi (Interface Numerique pour Instruments de Musique) Specification 1.0 (Edition abrge, 2015) (IEC 63035:2017) MIDI (Musikalisches Instrument digitale Schnittstelle) Festleg
3、ung 1.0 (Gekrzte Ausgabe, 2015) (IEC 63035:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
4、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lang
5、uage made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the
6、 Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t
7、he United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any
8、means reserved worldwide for CENELEC Members. Ref. No. EN 63035:2017 E National forewordThis British Standard is the UK implementation of EN 63035:2017. It is identical to IEC 63035:2017.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia
9、 systems and equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017
10、Published by BSI Standards Limited 2017ISBN 978 0 580 93070 6ICS 33.160.30; 35.200; 35.040.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amen
11、dments/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN 63035:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 63035 September 2017 ICS 33.160.30; 35.040.01; 35.200 English Version MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 201
12、5) (IEC 63035:2017) Midi (Interface Numerique pour Instruments de Musique) Specification 1.0 (Edition abrge, 2015) (IEC 63035:2017) MIDI (Musikalisches Instrument digitale Schnittstelle) Festlegung 1.0 (Gekrzte Ausgabe, 2015) (IEC 63035:2017) This European Standard was approved by CENELEC on 2017-07
13、-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta
14、ined on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified t
15、o the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece
16、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation
17、Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 63035:2017 E BS EN 63035:2017EN 63035:2017 2 Eur
18、opean foreword The text of document 100/2597/CDV, future edition 1 of IEC 63035, prepared by IEC/TC 100 “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 63035:2017. The following dates are fixed: latest date by which the
19、 document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-07-24 Attention is drawn to the possibility that some of the
20、 elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 63035:2017 was approved by CENELEC as a European Standard without any modification. BS EN
21、 63035:2017EN 63035:2017 2 European foreword The text of document 100/2597/CDV, future edition 1 of IEC 63035, prepared by IEC/TC 100 “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 63035:2017. The following dates are f
22、ixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-07-24 Attention is drawn to th
23、e possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 63035:2017 was approved by CENELEC as a European Standard w
24、ithout any modification. EN 63035:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this documen
25、t. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE
26、2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60130-9 - Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment EN 60130-9 -
27、 BS EN 63035:2017This page deliberately left blank 2 IEC 63035:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 General . 8 4.1 Hardware 8 4.2 Data format . 10 4.3 Message types 11 4.3.1 General . 11 4.3.2 Channel messages 11 4.3.3 S
28、ystem messages 11 4.4 Data types 12 4.4.1 General . 12 4.4.2 Status bytes 12 4.4.3 Data bytes . 12 4.5 Channel modes . 13 4.6 Power-up default conditions 14 5 MIDI implementation chart instructions 14 5.1 Introduction . 14 5.2 General . 14 5.3 Function description 14 5.3.1 Basic Channel . 14 5.3.2 M
29、ode . 14 5.3.3 Note Number . 15 5.3.4 Velocity . 15 5.3.5 Aftertouch 15 5.3.6 Pitch Bend . 15 5.3.7 Control Change . 15 5.3.8 Program Change . 15 5.3.9 System Exclusive 15 5.3.10 System Common . 15 5.3.11 System Real Time . 15 5.3.12 Aux. messages 16 5.3.13 Notes . 16 Annex A (normative) Summary of
30、MIDI messages 17 Annex B (normative) Control Change messages (Data bytes) 20 B.1 Control Change messages and Channel Mode messages . 20 B.2 Registered Parameter numbers . 23 Annex C (normative) System Exclusive messages . 25 C.1 System Exclusive messages . 25 C.2 Universal System Exclusive messages
31、25 Annex D (normative) MIDI Implementation Chart template . 30 Bibliography 31 2 IEC 63035:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 General . 8 4.1 Hardware 8 4.2 Data format . 10 4.3 Message types 11 4.3.1 General . 11 4.3.2
32、 Channel messages 11 4.3.3 System messages 11 4.4 Data types 12 4.4.1 General . 12 4.4.2 Status bytes 12 4.4.3 Data bytes . 12 4.5 Channel modes . 13 4.6 Power-up default conditions 14 5 MIDI implementation chart instructions 14 5.1 Introduction . 14 5.2 General . 14 5.3 Function description 14 5.3.
33、1 Basic Channel . 14 5.3.2 Mode . 14 5.3.3 Note Number . 15 5.3.4 Velocity . 15 5.3.5 Aftertouch 15 5.3.6 Pitch Bend . 15 5.3.7 Control Change . 15 5.3.8 Program Change . 15 5.3.9 System Exclusive 15 5.3.10 System Common . 15 5.3.11 System Real Time . 15 5.3.12 Aux. messages 16 5.3.13 Notes . 16 Ann
34、ex A (normative) Summary of MIDI messages 17 Annex B (normative) Control Change messages (Data bytes) 20 B.1 Control Change messages and Channel Mode messages . 20 B.2 Registered Parameter numbers . 23 Annex C (normative) System Exclusive messages . 25 C.1 System Exclusive messages . 25 C.2 Universa
35、l System Exclusive messages 25 Annex D (normative) MIDI Implementation Chart template . 30 Bibliography 31 BS EN 63035:2017IEC 63035:2017 IEC 2017 3 Figure 1 MIDI standard hardware . 9 Figure 2 Types of MIDI bytes . 10 Figure 3 Types of MIDI messages 10 Figure 4 Structure of a single message 11 Figu
36、re 5 Structure of System Exclusive message . 11 Table 1 Modes for receiver 13 Table 2 Modes for transmitter 13 Table A.1 MIDI Specification 1.0 message summary 17 Table B.1 Control Changes and Mode Changes (Status bytes 176 to 191) . 20 Table B.2 Registered Parameter numbers 24 Table C.1 System Excl
37、usive messages 25 Table C.2 Universal System Exclusive messages 26 Table D.1 MIDI Implementation Chart template 30 BS EN 63035:2017IEC 63035:2017 IEC 2017 3 Figure 1 MIDI standard hardware . 9 Figure 2 Types of MIDI bytes . 10 Figure 3 Types of MIDI messages 10 Figure 4 Structure of a single message
38、 11 Figure 5 Structure of System Exclusive message . 11 Table 1 Modes for receiver 13 Table 2 Modes for transmitter 13 Table A.1 MIDI Specification 1.0 message summary 17 Table B.1 Control Changes and Mode Changes (Status bytes 176 to 191) . 20 Table B.2 Registered Parameter numbers 24 Table C.1 Sys
39、tem Exclusive messages 25 Table C.2 Universal System Exclusive messages 26 Table D.1 MIDI Implementation Chart template 30 4 IEC 63035:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MIDI (MUSICAL INSTRUMENT DIGITAL INTERFACE) SPECIFICATION 1.0 (Abridged Edition, 2015) FOREWORD 1) The Inte
40、rnational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and elec
41、tronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committe
42、es; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for St
43、andardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has
44、 representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurat
45、e, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional
46、publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some
47、 areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents in
48、cluding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or re
49、liance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International St
