1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Digital addressable lighting interfacePart 302: Particular requirements Input devices Absolute input devices (IEC 62386-302:2017)BS EN 62386-302:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62386-302 Septemb
2、er 2017 ICS 29.140.50; 29.140.99 English Version Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices (IEC 62386-302:2017) Interface dclairage adressable numrique - Partie 302: Exigences particulires - Dispositifs dentre - Dispositifs de
3、ntre absolus (IEC 62386-302:2017) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 302: Besondere Anforderungen - Eingabegerte - Absolut-Eingabegerte (IEC 62386-302:2017) This European Standard was approved by CENELEC on 2017-06-23. CENELEC members are bound to comply with the CEN/CENEL
4、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or
5、 to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
6、the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
7、mbourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische N
8、ormung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62386-302:2017 E National forewordThis British Standard is the UK implementation of EN 62386302:2017. It is
9、 identical to IEC 62386302:2017.The UK participation in its preparation was entrusted to Technical Committee CPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessar
10、y provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 89724 5ICS 29.140.50; 29.140.99Compliance with a British Standard cannot confer immunity from legal obligations.This British Sta
11、ndard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62386302:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62386-302 September 2017 ICS 29.140.50; 2
12、9.140.99 English Version Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices (IEC 62386-302:2017) Interface dclairage adressable numrique - Partie 302: Exigences particulires - Dispositifs dentre - Dispositifs dentre absolus (IEC 62386-
13、302:2017) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 302: Besondere Anforderungen - Eingabegerte - Absolut-Eingabegerte (IEC 62386-302:2017) This European Standard was approved by CENELEC on 2017-06-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
14、which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
15、This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. C
16、ENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Nethe
17、rlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Manag
18、ement Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62386-302:2017 E BS EN 62386302:2017EN 62386-302:2017 2 European foreword The text of document 34C/1312/FDIS, future edition 1 of I
19、EC 62386-302, prepared by SC 34C “Auxiliaries for lamps“, of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62386-302:2017. The following dates are fixed: latest date by which the document has to be implemented at national level b
20、y publication of an identical national standard or by endorsement (dop) 2018-03-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of pa
21、tent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62386-302:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the follo
22、wing notes have to be added for the standards indicated: IEC 61347 NOTE Harmonized in EN 61347 series. IEC 61347-1 NOTE Harmonized as EN 61347-1. BS EN 62386302:2017EN 62386-302:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publicati
23、ons The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) ap
24、plies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/
25、HD Year IEC 62386-101 2014 Digital addressable lighting interface - Part 101: General requirements - System components EN 62386-101 2014 + A1 1)- - IEC 62386-103 2014 Digital addressable lighting interface - Part 103: General requirements - Control devices EN 62386-103 2014 + A1 2)- - IEC 62386-333
26、3)Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (feature type 33) EN 62386-333 4)1) Under preparation. Stage at the time of publication: IEC ACDV 62386-101/AMD1:2017. 2) Under preparation. Stage at the time of publication: IEC A
27、CDV 62386-103/AMD1:2017. 3) Under preparation. Stage at the time of publication: IEC CCDV 62386-333:2017. 4) Under preparation. Stage at the time of publication: prEN 62386-333:2016. BS EN 62386302:2017This page deliberately left blank 2 IEC 62386-302:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION
28、 . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General . 9 4.1 General . 9 4.2 Version number 9 4.3 Insulation 10 5 Electrical specification . 10 6 Interface power supply 10 7 Transmission protocol structure . 10 8 Timing . 10 9 Method of operation . 10 9.1 General . 10 9.2 Inst
29、ance type 10 9.3 Input signal and value . 10 9.3.1 General . 10 9.3.2 Binary inputs . 11 9.3.3 Analogue inputs . 11 9.4 Events 12 9.4.1 Priority use 12 9.4.2 Bus usage . 12 9.4.3 Encoding . 12 9.4.4 Event configuration 12 9.4.5 Event generation . 13 9.5 Configuring the input device 13 9.5.1 Using th
30、e report timer 13 9.5.2 Using the deadtime timer . 13 9.5.3 Setting the timers 13 9.5.4 Manual configuration . 14 9.6 Exception handling 14 9.6.1 Manufacturer specific errors 14 9.6.2 Error value . 14 10 Declaration of variables . 15 11 Definition of commands . 16 11.1 General . 16 11.2 Overview she
31、ets . 16 11.2.1 General . 16 11.2.2 Standard commands 16 11.3 Event messages . 16 11.3.1 INPUT NOTIFICATION (device/instance, event) 16 11.3.2 POWER NOTIFICATION (device) . 16 11.4 Device control instructions 17 11.5 Device configuration instructions . 17 11.6 Device queries 17 2 IEC 62386-302:2017
32、IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General . 9 4.1 General . 9 4.2 Version number 9 4.3 Insulation 10 5 Electrical specification . 10 6 Interface power supply 10 7 Transmission protocol structure . 10 8 Timing . 10 9 Method
33、of operation . 10 9.1 General . 10 9.2 Instance type 10 9.3 Input signal and value . 10 9.3.1 General . 10 9.3.2 Binary inputs . 11 9.3.3 Analogue inputs . 11 9.4 Events 12 9.4.1 Priority use 12 9.4.2 Bus usage . 12 9.4.3 Encoding . 12 9.4.4 Event configuration 12 9.4.5 Event generation . 13 9.5 Con
34、figuring the input device 13 9.5.1 Using the report timer 13 9.5.2 Using the deadtime timer . 13 9.5.3 Setting the timers 13 9.5.4 Manual configuration . 14 9.6 Exception handling 14 9.6.1 Manufacturer specific errors 14 9.6.2 Error value . 14 10 Declaration of variables . 15 11 Definition of comman
35、ds . 16 11.1 General . 16 11.2 Overview sheets . 16 11.2.1 General . 16 11.2.2 Standard commands 16 11.3 Event messages . 16 11.3.1 INPUT NOTIFICATION (device/instance, event) 16 11.3.2 POWER NOTIFICATION (device) . 16 11.4 Device control instructions 17 11.5 Device configuration instructions . 17 1
36、1.6 Device queries 17 BS EN 62386302:2017IEC 62386-302:2017 IEC 2017 3 11.7 Instance control instructions . 17 11.8 Instance configuration instructions 17 11.8.1 General . 17 11.8.2 SET REPORT TIMER (DTR0) . 17 11.8.3 SET DEADTIME TIMER (DTR0) . 17 11.8.4 SET EVENT FILTER (DTR0) 17 11.9 Instance que
37、ries . 17 11.9.1 General . 17 11.9.2 QUERY INSTANCE ERROR 17 11.9.3 QUERY DEADTIME TIMER . 17 11.9.4 QUERY REPORT TIMER . 18 11.9.5 QUERY SWITCH . 18 11.10 Special commands 18 (normative) Examples of connecting external switches or sliders . 19 Annex AA.1 Single switch. 19 A.2 Single switch, two pos
38、itions 19 A.3 Single switch with neutral position. 19 A.4 Rotary switch 19 A.5 Slider 20 Bibliography 21 Figure 1 IEC 62386 graphical overview 6 Figure A.1 Single switch (single-pole, single-throw) . 19 Figure A.2 Single switch double throw (single-pole, double-throw) . 19 Figure A.3 Single switch (
39、single-pole, double-throw) with neutral position 19 Figure A.4 Rotary switch 20 Figure A.5 Slider 20 Table 1 Relation of input signal and “inputValue“ 11 Table 2 Position events 12 Table 3 Event filter . 13 Table 4 Event timer setting 14 Table 5 “manualCapabilityInstance3xx” values 14 Table 6 “insta
40、nceErrorByte” values 15 Table 7 Declaration of device variables 15 Table 8 Restrictions to instance variables defined in IEC 62386-103:2014 and IEC 62386-103:2014/AMD1: 15 Table 9 Declaration of instance variables . 16 Table 10 Standard commands 16 BS EN 62386302:2017 4 IEC 62386-302:2017 IEC 2017 I
41、NTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 302: Particular requirements Input devices Absolute input devices FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotech
42、nical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications
43、, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, go
44、vernmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decision
45、s or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internati
46、onal use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order
47、to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearl
48、y indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bod
49、ies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication,
