1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-6: Installation of fieldbuses Installation profiles for CPF 6BS EN 61784-5-6:2013National forewordThis British Standard is the UK implementation of EN 61784-5-6:2013. It is identical to IEC 61784-5-6:2013. It supersedes BS EN
2、61784-5-6:2012 which is withdrawn.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This p
3、ublication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84196 5ICS 25.040.40; 35.100.40Compliance with a British Standard cannot c
4、onfer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-6:2013EUROPEAN STANDARD EN 61784-5-6 NORME EUROP
5、ENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploita
6、tion in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-6:2013 E ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-6:2012 English version Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 (IEC 6178
7、4-5-6:2013) Rseaux de communication industriels - Profils - Partie 5-6: Installation des bus de terrain - Profils dinstallation pour CPF 6 (CEI 61784-5-6:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-6: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 6 (IEC
8、61784-5-6:2013) This European Standard was approved by CENELEC on 2013-10-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and
9、bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th
10、e responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia
11、, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-6:2013EN
12、 61784-5-6:2013 - 2 - Foreword The text of document 65C/738/FDIS, future edition 3 of IEC 61784-5-6, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-6:2
13、013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-
14、10-22 This document supersedes EN 61784-5-6:2012. EN 61784-5-6:2013 includes the following significant technical changes with respect to EN 61784-5-6:2012: alignment with EN 61918:2013; addition of new connectors. This standard is to be used in conjunction with EN 61918:2013. Attention is drawn to t
15、he possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-6:2013 was approved by CENELEC as a Eur
16、opean Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC/TR 61158-1 NOTE Harmonized as CLC/TR 61158-1. IEC 61158 Series NOTE Harmonized as EN 61158 Series (not modified). BS EN 61784-5-6:2013- 3 - EN 617
17、84-5-6:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the editi
18、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as f
19、ollows: Publication Year Title EN/HD Year Addition to Annex ZA of EN 61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784-5-6:2013 2 61784-5-6 IEC:2013 CONTENTS INTRODUCTION . 9 1 Scope . 10 2 Normative
20、 references . 10 3 Terms, definitions and abbreviated terms . 10 4 CPF 6: Overview of installation profiles 10 5 Installation profile conventions . 10 6 Conformance to installation profiles 11 Annex A (normative) CPF 6 Type 8 network specific installation profile 13 A.1 Installation profile scope .
21、13 A.2 Normative references . 13 A.3 Installation profile terms, definitions, and abbreviated terms . 13 A.3.1 Terms and definitions 13 A.3.2 Abbreviated terms . 14 A.3.3 Conventions for installation profiles . 15 A.4 Installation planning . 15 A.4.1 General . 15 A.4.1.1 Objective . 15 A.4.1.2 Cabli
22、ng in industrial premises 15 A.4.1.3 The planning process 15 A.4.1.4 Specific requirements for CPs . 15 A.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 15 A.4.2 Planning requirements . 15 A.4.2.1 Safety 15 A.4.2.2 Security . 15 A.4.2.3 Environmental considerations
23、and EMC . 15 A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 16 A.4.3 Network capabilities 16 A.4.3.1 Network topology . 16 A.4.3.2 Network characteristics . 18 A.4.4 Selection and use of cabling components 20 A.4.4.1 Cable selection . 20 A.4.4.2 Connecting hardwar
24、e selection . 24 A.4.4.3 Connections within a channel/permanent link 25 A.4.4.4 Terminators 26 A.4.4.5 Device location and connection . 26 A.4.4.6 Coding and labelling . 26 A.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 27 A.4.4.8 Storage and transportation of cables . 28
25、 A.4.4.9 Routing of cables 28 A.4.4.10 Separation of circuit 28 A.4.4.11 Mechanical protection of cabling components . 28 BS EN 61784-5-6:201361784-5-6 IEC:2013 3 A.4.4.12 Installation in special areas . 28 A.4.5 Cabling planning documentation 28 A.4.5.1 Common description 28 A.4.5.2 Cabling plannin
26、g documentation for CPs . 28 A.4.5.3 Network certification documentation 29 A.4.5.4 Cabling planning documentation for generic cabling in accordance with ISO/IEC 24702 . 29 A.4.6 Verification of cabling planning specification . 29 A.5 Installation implementation . 29 A.5.1 General requirements 29 A.
27、5.1.1 Common description 29 A.5.1.2 Installation of CPs . 29 A.5.1.3 Installation of generic cabling in industrial premises 29 A.5.2 Cable installation . 29 A.5.2.1 General requirements for all cabling types . 29 A.5.2.2 Installation and routing 31 A.5.2.3 Specific requirements for CPs . 31 A.5.2.4
28、Specific requirements for wireless installation 31 A.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 31 A.5.3 Connector installation 31 A.5.3.1 Common description 31 A.5.3.2 Shielded connectors 31 A.5.3.3 Unshielded connectors 31 A.5.3.4 Specific requirements for CPs
29、 . 31 A.5.3.5 Specific requirements for wireless installation 33 A.5.3.6 Specific requirements for generic cabling in accordance with ISO/IEC 24702 33 A.5.4 Terminator installation . 33 A.5.5 Device installation . 33 A.5.6 Coding and labelling 33 A.5.7 Earthing and bonding of equipment and devices a
30、nd shield cabling . 33 A.5.8 As-implemented cabling documentation . 33 A.6 Installation verification and installation acceptance test 33 A.6.1 General . 33 A.6.2 Installation verification . 33 A.6.2.1 General . 33 A.6.2.2 Verification according to cabling planning documentation 33 A.6.2.3 Verificati
31、on of earthing and bonding 33 A.6.2.4 Verification of shield earthing 34 A.6.2.5 Verification of cabling system 34 A.6.2.6 Cable selection verification . 34 A.6.2.7 Connector verification . 34 A.6.2.8 Connection verification 34 A.6.2.9 Terminators verification . 34 A.6.2.10 Coding and labelling veri
32、fication . 34 A.6.2.11 Verification report . 34 A.6.3 Installation acceptance test . 34 A.6.3.1 General . 34 BS EN 61784-5-6:2013 4 61784-5-6 IEC:2013 A.6.3.2 Acceptance test of Ethernet based cabling 34 A.6.3.3 Acceptance test of non-Ethernet-based cabling . 34 A.6.3.4 Specific requirements for wir
33、eless installation 35 A.6.3.5 Acceptance test report . 35 A.7 Installation administration . 35 A.8 Installation maintenance and installation troubleshooting . 35 Annex B (normative) CPF 6 Ethernet network specific installation profile . 36 B.1 Installation profile scope . 36 B.2 Normative references
34、 . 36 B.3 Installation profile terms, definitions, and abbreviated terms . 36 B.3.1 Terms and definitions 36 B.3.2 Abbreviated terms . 36 B.3.3 Conventions for installation profiles . 36 B.4 Installation planning . 37 B.4.1 General . 37 B.4.1.1 Objective . 37 B.4.1.2 Cabling in industrial premises 3
35、7 B.4.1.3 The planning process 37 B.4.1.4 Specific requirements for CPs . 37 B.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 37 B.4.2 Planning requirements . 37 B.4.2.1 Safety 37 B.4.2.2 Security . 37 B.4.2.3 Environmental considerations and EMC . 37 B.4.2.4 Specif
36、ic requirements for generic cabling in accordance with ISO/IEC 24702 38 B.4.3 Network capabilities 38 B.4.3.1 Network topology . 38 B.4.3.2 Network characteristics . 38 B.4.4 Selection and use of cabling components 40 B.4.4.1 Cable selection . 40 B.4.4.2 Connecting hardware selection . 43 B.4.4.3 Co
37、nnections within a channel/permanent link 47 B.4.4.4 Terminators 48 B.4.4.5 Device location and connection . 48 B.4.4.6 Coding and labelling . 48 B.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 48 B.4.4.8 Storage and transportation of cables . 48 B.4.4.9 Routing of cables
38、48 B.4.4.10 Separation of circuit 48 B.4.4.11 Mechanical protection of cabling components . 48 B.4.4.12 Installation in special areas . 48 B.4.5 Cabling planning documentation 48 B.4.6 Verification of cabling planning specification . 48 B.5 Installation implementation . 48 B.5.1 General requirements
39、 48 BS EN 61784-5-6:201361784-5-6 IEC:2013 5 B.5.2 Cable installation . 49 B.5.2.1 General requirements for all cabling types . 49 B.5.2.2 Installation and routing 50 B.5.2.3 Specific requirements for CPs . 50 B.5.2.4 Specific requirements for wireless installation 50 B.5.2.5 Specific requirements f
40、or generic cabling in accordance with ISO/IEC 24702 50 B.5.3 Connector installation 50 B.5.3.1 Common description 50 B.5.3.2 Shielded connectors 50 B.5.3.3 Unshielded connectors 50 B.5.3.4 Specific requirements for CPs . 50 B.5.3.5 Specific requirements for wireless installation 51 B.5.3.6 Specific
41、requirements for generic cabling in accordance with ISO/IEC 24702 51 B.5.4 Terminator installation . 51 B.5.5 Device installation . 51 B.5.6 Coding and labelling 51 B.5.7 Earthing and bonding of equipment and devices and shield cabling . 51 B.5.8 As-implemented cabling documentation . 51 B.6 Install
42、ation verification and installation acceptance test 51 B.6.1 General . 51 B.6.2 Installation verification . 51 B.6.3 Installation acceptance test . 51 B.7 Installation administration . 51 B.8 Installation maintenance and installation troubleshooting . 51 Bibliography 52 Figure 1 Standards relationsh
43、ips 9 Figure A.1 Type 8 network structure example 17 Figure A.2 Example of a Type 8 network configuration . 18 Figure A.3 Sub-D connector pin assignment 32 Figure A.4 M23 circular connector pin assignment . 32 Figure A.5 M12 circular connector pin assignment . 32 Figure A.6 Terminal connector at the
44、 device 33 Figure B.1 Plug connector interface M12-FO 45 Figure B.2 Adaptor connector interface M12-FO 46 Figure B.3 Terminal connector at the device 50 Table A.1 Basic network characteristics for balanced cabling not based on Ethernet . 19 Table A.2 Network characteristics for optical fibre cabling
45、 20 Table A.3 Information relevant to balanced cable: fixed cables 21 Table A.4 Information relevant to balanced cable: cords 22 Table A.5 Remote bus fibre optic cable length . 24 Table A.6 Connectors for copper cabling CPs not based on Ethernet . 24 Table A.7 Optical fibre connecting hardware 25 Ta
46、ble A.8 Relationship between FOC and fibre types (Type 8 networks) 25 BS EN 61784-5-6:2013 6 61784-5-6 IEC:2013 Table A.9 Colour code for balanced cables used by Type 8 networks 27 Table A.10 Parameters for balanced cables . 29 Table A.11 Parameters for silica optical fibre cables 30 Table A.12 Para
47、meters for POF optical fibre cables . 30 Table A.13 Parameters for hard clad silica optical fibre cables . 30 Table A.14 Pin assignment of the terminal connector . 33 Table B.1 Network characteristics for balanced cabling based on Ethernet 39 Table B.2 Network characteristics for optical fibre cabli
48、ng 39 Table B.3 Information relevant to balanced cable: fixed cables 41 Table B.4 Information relevant to balanced cable: cords 42 Table B.5 Information relevant to optical fibre cables . 43 Table B.6 Connectors for balanced cabling CPs based on Ethernet . 44 Table B.7 Optical fibre connecting hardw
49、are 44 Table B.8 Dimensions of plug connector interface M12-FO 45 Table B.9 Dimensions of adaptor connector interface M12-FO . 46 Table B.10 Relationship between FOC and fibre types (CP 6/2 Ethernet network) . 47 Table B.11 Parameters for balanced cables . 49 Table B.12 Parameters for silica optical fibre cables 49 Table B.13 Parameters for POF optical fibre cables . 49 Table B.14 Parameters for hard clad silica optical fibre cables . 50 BS EN 61784-5-6:20
