欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    EN 61754-7-2008 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7 Type MPO connector family《光纤互连器件和无源器件 光纤连接器接口 第7部分 MPO型连接器.pdf

    • 资源ID:720503       资源大小:1.22MB        全文页数:30页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    EN 61754-7-2008 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7 Type MPO connector family《光纤互连器件和无源器件 光纤连接器接口 第7部分 MPO型连接器.pdf

    1、BRITISH STANDARDBS EN 61754-7:2008Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 7: Type MPO connector familyICS 33.180.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51

    2、g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61754-7:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2008 BSI 2008ISBN 978 0 580 57566 2National forewordThis British Standard is the UK implement

    3、ation of EN 61754-7:2008. It is identical to IEC 61754-7:2008. It supersedes BS EN 61754-7:2005 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.

    4、A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from

    5、legal obligations.Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARD EN 61754-7 NORME EUROPENNE EUROPISCHE NORM June 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische

    6、 Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61754-7:2008 E ICS 33.180.20 Supersedes EN 61754-7:2005English version Fibre optic interconnecting devices an

    7、d passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family (IEC 61754-7:2008) Dispositifs dinterconnexion et composants passifs fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 7: Famille de connecteurs de type MPO (CEI 61754-7:2008) Lichtwel

    8、lenleiter -Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 7: Steckverbinderfamilie der Bauart MPO (IEC 61754-7:2008) This European Standard was approved by CENELEC on 2008-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal

    9、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC membe

    10、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC

    11、members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl

    12、ovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 86B/2581/CDV, future edition 3 of IEC 61754-7, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was a

    13、pproved by CENELEC as EN 61754-7 on 2008-04-01. This European Standard supersedes EN 61754-7:2005. Specific technical changes involve the addition of an aligned key adaptor interface definition to address all existing MPO applications The following dates were fixed: latest date by which the EN has t

    14、o be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-04-01 The International Electrotechnical Commission (IEC) and CENELEC draw attent

    15、ion to the fact that it is claimed that compliance with this document may involve the use of a patent concerning MPO connectors. The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is w

    16、illing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with the IEC. Information may be obtained from: Intellectual Property Department, Nippon Tel

    17、egraph and Telephone Corporation, 20-2 Nishi-shinjuku 3-Chome Shinjukuku, Tokyo 163-14, Japan. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC and CENELEC shall not be held responsible for ide

    18、ntifying any or all such patent rights. _ Endorsement notice The text of the International Standard IEC 61754-7:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 61754-7:2008 2 CONTENTS 1 Scope.4 2 Description .4 3 Interfaces .4 Figure 1 MPO connector configuratio

    19、ns 5 Figure 2 MPO female plug connector angled interface 6 Figure 3 Optical datum target location diagrams .8 Figure 4 Gauge pin.10 Figure 5 Gauge for plug11 Figure 6 MPO male plug connector angled interface .12 Figure 7 MPO adaptor interface14 Figure 8 MPO female plug connector flat interface16 Fig

    20、ure 9 MPO male plug connector flat interface.18 Figure 10 MPO backplane housing interface 20 Figure 11 MPO printed board housing interface 23 Figure 12 MPO aligned key adaptor interface26 Table 1 Dimensions of the MPO female plug connector angled interface.7 Table 2 Dimensions of the gauge pin10 Tab

    21、le 3 Dimensions of the gauge for plug.11 Table 4 Dimensions of the MPO male plug connector angled interface13 Table 5 Dimensions of the MPO adaptor interface 15 Table 6 Dimensions of the MPO female plug connector flat interface 17 Table 7 Dimensions of the MPO male plug connector flat interface .19

    22、Table 8 Dimensions of the MPO backplane housing22 Table 9 Grade 23 Table 10 Dimensions of the MPO printed board housing interface.25 Table 11 Dimensions of the MPO aligned key adaptor interface 27 BS EN 61754-7:2008 3 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR I

    23、NTERFACES Part 7: Type MPO connector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for type MPO family of connectors. 2 Description The parent connector for type MPO connector family is a multiway plug connector charac-terized by a rectangular ferrule normally 6,4 m

    24、m 2,5 mm which utilizes two pins of 0,7 mm diameter as its alignment. It is applicable to a joint of multiple fibres up to 12 fibres by arraying them between two pin-positioning holes in the ferrule. Furthermore, it is capable of joining up to 24 fibres by arraying them with a two layer arrangement.

    25、 The connector includes a push-pull coupling mechanism and a ferrule spring loaded in the direction of the optical axis. The connector has a single male key which may be used to orient and limit the relative position between the connector and the component to which it is mated. Connector interfaces

    26、are configured using a female plug without pins, a male plug with pins fixed and an adaptor as shown in Figure 1. The female plug is intermateable with the male plug. Moreover, connector interfaces between the female plug and the male plug are configured by applying a backplane housing and a printed

    27、 board housing instead of the adaptor. 3 Interfaces This standard contains the following standard interfaces: Interface 7-1: MPO female plug connector angled interface Push/pull consisting of: Interface 7-1-1 for 2 to 12 fibres Interface 7-1-2 for 16 to 24 fibres Interface 7-2: MPO male plug connect

    28、or angled interface Push/pull consisting of: Interface 7-2-1 for 2 to 12 fibres Interface 7-2-2 for 16 to 24 fibres Interface 7-3: MPO adaptor interface Push/pull Interface 7-4: MPO female plug connector flat interface Push/pull consisting of: Interface 7-4-1 for 2 to 12 fibres Interface 7-4-2 for 1

    29、6 to 24 fibres Interface 7-5: MPO male plug connector flat interface Push/pull consisting of: Interface 7-5-1 for 2 to 12 fibres Interface 7-5-2 for 16 to 24 fibres Interface 7-6: MPO backplane housing interface Self-retaining Interface 7-7: MPO printed board housing interface Self-retaining BS EN 6

    30、1754-7:2008 4 Interface 7-8: MPO adaptor interface Push/pull, aligned key configuration The following standards are intermateable: Female plugs Adaptors/housings Male plugs 7-1-1 7-3 7-2-1 7-1-2 7-3 7-2-2 7-4-1 7-3 and 7-8 7-5-1 7-4-2 7-3 and 7-8 7-5-2 7-1-1 7-6 and 7-7 7-2-1 7-1-2 7-6 and 7-7 7-2-2

    31、 7-4-1 7-6 and 7-7 7-5-1 7-4-2 7-6 and 7-7 7-5-2 NOTE Connector interfaces among 2 to 12 fibres will intermate and will correctly align the lower defined numbers of optical datum targets. Also connector interfaces among 16 to 24 fibres will intermate and will correctly align the lower defined number

    32、s of optical datum targets. Female plug Male plug AdaptorBackplane housingPrinted board housingIEC 1065/2000 Figure 1 MPO connector configurations BS EN 61754-7:2008 5 See Figure 3 A E F G H Pin-holes Coupling sleeve Z I JK ACABAAL M C D S Y X R Q P O N T U ADIEC 395/08 Figure 2 MPO female plug conn

    33、ector angled interface BS EN 61754-7:2008 6 Table 1 Dimensions of the MPO female plug connector angled interface Dimensions Reference Minimum Maximum Notes A C D E F G H I J K L M N O P Q R S T U AA AB AC AD 0,699 mm 4,597 mm 6,3 mm 8,34 mm 9,49 mm 10,85 mm 12,19 mm 8,8 mm 7,9 mm 1,4 mm 0,2 mm 2,4 m

    34、m 2,8 mm 4,89 mm 5,59 mm 5,7 mm 2,9 mm 2,4 mm 42 7,5 0,701 mm 4,603 mm 6,5 mm 8,54 mm 9,59 mm 11,05 mm 12,59 mm 9,2 mm 8,1 mm 0,8 mm 2,6 mm 3,0 mm 4,99 mm 5,69 mm 7,7 mm 3,1 mm 0,8 mm 2,5 mm 45 45 45 8,5 1 2 3 4 and 5 NOTE 1 Each pin-hole must accept a gauge pin as shown in Figure 4 to a depth of 5,

    35、5 mm with a maximum force of 1,7 N. In addition, two pin-holes of a plug must accept a gauge as shown in Figure 5 to a depth of 5,5 mm with a maximum force of 3,4 N. NOTE 2 Dimension C is defined as the distance between two pin-hole centres. NOTE 3 Dimension I is given for a fibre endface centre of

    36、a plug end when not mated. It is noticed that a ferrule is movable by a certain axial compression force, and therefore dimension I is variable. Ferrule compression force must be 7,8 N to 11,8 N when a position of the fibre endface from the datum Z is in the range of 8,2 mm to 8,4 mm. NOTE 4 Coupling

    37、 sleeve must be movable by a certain axial compression force. Dimension L is given for a coupling sleeve end when not mated. Coupling sleeve compression force must be 2,9 N to 6,9 N when a position of the coupling sleeve endface from datum Z is in the range of 0 mm to 0,1 mm to the right or to the l

    38、eft of datum Z. NOTE 5 An adaptor coupling part must be unlocked by a left-direction movement of a coupling sleeve, when it is separate from an adaptor. When the coupling sleeve is moved for unlocking, a position of the coupling sleeve endface must be larger than 2,0 mm in the left direction from th

    39、e datum Z. BS EN 61754-7:2008 7 1,375 1,375 1,125 1,125 0,875 0,875 0,375 0,375 0,125 0,125 0,625 0,625 Twelve fibres Y X 1,125 1,125 0,875 0,875 0,375 0,375 0,125 0,125 0,625 0,625 Ten fibres YX 0,375 0,375 0,125 0,125 Four fibres Y X 0,125 0,125 Two fibres Y X 0,8750,875 0,375 0,375 0,125 0,125 0,

    40、625 0,625 Eight fibres Y X IEC 1594/04 Figure 3 Optical datum target location diagrams (1 of 2) BS EN 61754-7:2008 8 0,125 0,125 1,125 1,125 0,875 0,875 0,375 0,375 0,625 0,625 Twenty fibres Y X 0,250 0,2500,125 0,1250,875 0,875 0,375 0,375 0,625 0,625 Sixteen fibres YX 0,250 0,250 0,125 0,125 1,375

    41、 1,375 1,125 1,125 0,875 0,875 0,375 0,375 0,625 0,625 Twenty four fibres Y X 0,250 0,250 IEC 1595/04 NOTE The optical datum target location diagram is shown in the figure. Here, datum X is defined as the line passing through two pin-hole centres, and datum Y is defined as the line perpendicular to

    42、datum X and passing through the midpoint of two pin-hole centres. Figure 3 (2 of 2) BS EN 61754-7:2008 9 0,0005 BC B BB BA A IEC 1596/04 Figure 4 Gauge pin Table 2 Dimensions of the gauge pin Dimensions mm Reference Minimum Maximum Notes A B BA BB BC 0,698 5 10,8 0,2 0,2 6,0 0,699 0 11,2 0,4 0,5 1 2

    43、 NOTE 1 Surface roughness Rz= 0,1 m for the length of dimension BC. NOTE 2 Typical dimensions. BS EN 61754-7:2008 10 0,001 WWBAADCBB BC 0,000 5 U IEC 396/08 Figure 5 Gauge for plug Table 3 Dimensions of the gauge for plug Dimensions mm Reference Minimum Maximum Notes A C D U BA BB BC 0,698 5 4,599 5

    44、 6,3 2,4 0,2 0,2 6,0 0,699 0 4,600 5 6,5 2,5 0,4 0,5 6,5 For two pins, 1 2 2 NOTE 1 Surface roughness Rz= 0,1 m. NOTE 2 Typical dimensions. BS EN 61754-7:2008 11 0,002 W W ABB U EFGHBAT Guide-pin Guide-pin Coupling sleeve See Figure 3 Z K I J AC AB AA L M C D S X Y R Q P O N AD CAIEC 397/08 Figure 6

    45、 MPO male plug connector angled interface BS EN 61754-7:2008 12 Table 4 Dimensions of the MPO male plug connector angled interface Dimensions Reference Minimum Maximum Notes A C D E F G H I J K L M N O P Q R S T U AA AB AC AD BA BB CA 0,697 mm 4,597 mm 6,3 mm 8,34 mm 9,49 mm 10,85 mm 12,19 mm 8,8 mm

    46、 7,9 mm 1,4 mm 0,2 mm 2,4 mm 2,8 mm 4,89 mm 5,59 mm 5,7 mm 2,9 mm 2,4 mm 42 7,5 0,2 mm 0,2 mm 1,6 mm 0,699 mm 4,603 mm 6,5 mm 8,54 mm 9,59 mm 11,05 mm 12,59 mm 9,2 mm 8,1 mm 0,8 mm 2,6 mm 3,0 mm 4,99 mm 5,69 mm 7,7 mm 3,1 mm 0,8 mm 2,5 mm 45 45 45 8,5 0,4 mm 0,5 mm 3,3 mm 1 2 3 4 and 5 6 NOTE 1 Each

    47、 guide pin must be retained with a minimum force of 19,6 N. Surface roughness Rzmust be below 0,5 m. NOTE 2 Dimension C is defined as the distance between two guide-pin centres. NOTE 3 Dimension I is given for a fibre endface centre of a plug end when not mated. It is noticed that a ferrule is movab

    48、le by a certain axial compression force, and therefore the dimension I is variable. Ferrule compression force must be 7,8 N to 11,8 N when a position of the fibre endface from the datum Z is in the range of 8,2 mm to 8,4 mm. NOTE 4 Coupling sleeve must be movable by a certain axial compression force

    49、. Dimension L is given for a coupling sleeve end when not mated. Coupling sleeve compression force must be 2,9 N to 6,9 N when a position of the coupling sleeve endface from datum Z is in the range of 0 mm to 0,1 mm to the right or to the left of datum Z. NOTE 5 An adaptor coupling part must be unlocked by a left-direction movement of a coupling sleeve, when it is separate from an a


    注意事项

    本文(EN 61754-7-2008 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7 Type MPO connector family《光纤互连器件和无源器件 光纤连接器接口 第7部分 MPO型连接器.pdf)为本站会员(花仙子)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开