1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnecting devices and passive components Performance standard Part 022-2: Fibre optic connectors terminated on multimode fibre for category C Controlled environ
2、ment (IEC 61753-022-2:2012)BS EN 61753-022-2:2013National forewordThis British Standard is the UK implementation of EN 61753-022-2:2013. It is identical to IEC 61753-022-2:2012. It supersedes BS EN 61753-022-2:2003, which is withdrawn.The UK participation in its preparation was entrusted by Technica
3、l Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a cont
4、ract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013.ISBN 978 0 580 57683 6 ICS 33.180.20 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the
5、authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-022-2:2013EUROPEAN STANDARD EN 61753-022-2 NORME EUROPENNE EUROPISCHE NORM February 2013CENELEC European Committee for Electrotechnic
6、al StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-02
7、2-2:2013 E ICS 33.180.20 Supersedes EN 61753-022-2:2003 English version Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment(IEC 61753-022-2:2012) Dispositifs dinte
8、rconnexion et composantspassifs fibres optiques - Norme de performance - Partie 022-2: Connecteurs fibres optiques raccords une fibremultimodale pour la catgorie C - Environnement contrl (CEI 61753-022-2:2012) Lichtwellenleiter - Verbindungselemente und passiveBauteile - Betriebsverhalten - Teil 022
9、-2: Lichtwellenleiter-Steckverbinder zum Anschluss anMehrmodenfasern fr die Kategorie C - Kontrollierte Umgebung(IEC 61753-022-2:2012) This European Standard was approved by CENELEC on 2012-12-20. CENELEC members are bound to complywith the CEN/CENELEC Internal Regulations which stipulate the condit
10、ions for giving this European Standardthe status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exist
11、s in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language and notifiedto the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the nationa
12、l electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,Portugal,
13、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-022-2:2013EN 61753-022-2:2013 Foreword The text of document 86B/3493/FDIS, future edition 2 of IEC 61753-022-2, prepared by SC 86B,“Fibre optic interconnecting devices and passive components“, of IEC
14、 TC 86, “Fibre optics“ wassubmitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-022-2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level bypublication of an identical national standard or by endorsement (dop) 2013-0
15、9-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2013-12-20 This document supersedes EN 61753-022-2:2003. EN 61753-022-2:2013 includes the following significant technical changes with respect to EN 61753-022-2:2003: reconsideration of test req
16、uirements and details. Attention is drawn to the possibility that some of the elements of this document may be the subject ofpatent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all suchpatent rights. Endorsement notice The text of the International Standard IEC 617
17、53-022-2:2012 was approved by CENELEC as aEuropean Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61753-1:2007 NOTE Harmonized as EN 61753-1:2007 (not modified). BS EN 61753-022-2:2013EN 61753-022-2:201
18、3 Annex ZA (normative) Normative references to international publicationswith their corresponding European publicationsThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited app
19、lies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HDapplies. Year Publication EN/HD Title Year IEC 60793-2-10 Optical fi
20、bres - - Part 2-10: Product specifications - Sectional specification for category A1 multimodefibres EN 60793-2-10 - IEC 61300-1 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-2-1 - Fibre optic
21、 interconnecting devices andpassive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-2 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability EN
22、61300-2-2 - IEC 61300-2-4 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-6 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - P
23、art 2-6: Tests - Tensile strength of couplingmechanism EN 61300-2-6 - IEC 61300-2-12 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 2-12: Tests - Impact EN 61300-2-12 - IEC 61300-2-17 - Fibre optic interconnecting devices andpassive compone
24、nts - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - BS EN 61753-022-2:2013EN
25、 61753-022-2:2013 IEC 61300-2-19 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices andpassive components - Basic test and measurement p
26、rocedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting de
27、vices andpassive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-3-3 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 3-3: Examinations and
28、measurements -Active monitoring of changes in attenuationand return loss EN 61300-3-3 - IEC 61300-3-4 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements -Attenuation EN 61300-3-4 - IEC 61300-3-6 - Fibre optic
29、interconnecting devices andpassive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements -Return loss EN 61300-3-6 - IEC 61300-3-28 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 3-28: Examinations and
30、 measurements - Transient loss EN 61300-3-28 - IEC 61300-3-34 - Fibre optic interconnecting devices andpassive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors EN 61300-3-34 - BS EN 61753-022-2:201361753-022-2 IEC:
31、2012 CONTENTS 1 Scope . . 5 2 Normative references . 5 3 Test 6 4 Test report . . 7 5 Performance requirements . . 7 5.1 Dimensions 7 5.2 Sample size . 7 5.3 Test details and requirements . . 7 Annex A (normative) Sample size . 14 Table 1 Test details and requirements . . 8 Table A.1 Sample size . 1
32、4 BS EN 61753-022-2:201361753-022-2 IEC:2012 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 022-2: Fibre optic connectors terminated on multimode fibre for category C Controlled environment 1 Scope This part of IEC 61753 contains the minimum requirements and s
33、everities which a fibre optic connector terminated on multimode fibre must satisfy in order to be categorized as meeting the IEC standard category C Controlled Environment, as defined in Annex A of IEC 61753-1:2007. 2 Normative references The following documents, in whole or in part, are normatively
34、 referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-10, Optical fibres Part 2-10: Product specifications Sec
35、tional specification for category A1 multimode fibres IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1 General and guidance IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedu
36、res Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-2: Tests Mating durability IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures
37、 Part 2-4: Tests Fibre/cable retention IEC 61300-2-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-6: Tests Tensile strength of coupling mechanism IEC 61300-2-12, Fibre optic interconnecting devices and passive components Basic test and meas
38、urement procedures Part 2-12: Tests Impact IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18
39、: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) BS EN 61753-022-2:2013 6 61753-022-2 IEC:2012 IEC 61300-2-22, Fibre optic interconnecting devices and
40、 passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecti
41、ng devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices IEC 61300-3-3, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: Examinations and measurements Active
42、monitoring of changes in attenuation and in return loss IEC 61300-3-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-4: Examinations and measurements Attenuation IEC 61300-3-6, Fibre optic interconnecting devices and passive components Basic
43、test and measurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-28, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measurements Transient loss IEC 61300-3-34, Fibre optic interconnecting dev
44、ices and passive components Basic test and measurement procedures Part 3-34: Examinations and measurements Attenuation of random mated connectors 3 Test All test methods are in accordance with the IEC 61300 series. The connector shall be terminated onto multimode fibre as per IEC 60793-2-10, fibre t
45、ype A1a or A1b, in either secondary coated or reinforced cable format. Each test defines the number of samples to be evaluated. The samples used for each test are intended to be previously unstressed new samples, but may be selected from previously used samples if so desired. All optical testing sha
46、ll be carried out at one central wavelength only, this shall be either 850 nm 30 nm. Source characteristics shall be S2, S3 and detector D1, as specified in IEC 61300-3-4. Launch conditions shall be in accordance with IEC 61300-1. The full set of tests shall be carried out for all fibre types for wh
47、ich compliance to this standard is claimed. For different cable structures only requalification to tests 4, 6, 9, 10, 11, 12, 13 and 14 is requested. Change in attenuation, for the purpose of the test, is defined as the peak-to-peak variation and shall be measured using IEC 61300-3-3. For monitoring
48、 intermittent discontinuities during a test, IEC 61300-3-28 shall be used. BS EN 61753-022-2:201361753-022-2 IEC:2012 7 4 Test report Fully documented test reports and supporting evidence shall be prepared and be available for inspection as evidence that the tests have been carried out and complied
49、with. 5 Performance requirements 5.1 Dimensions Dimensions shall comply with the appropriate IEC interface standard. 5.2 Sample size For the purposes of this standard, a sample is a connector set, defined as the complete set of connector components required to provide demountable coupling between one or more pairs of optical fibres, i.e. “cable-plug-adapter-plug-cable” or “cable-socket-plug-cable”. The l
