1、BSI Standards PublicationCoaxial communication cablesPart 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectricBS EN 61196-10:2016BS EN 61196-10:2016Incorporating corrigendum February 2016EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61196-10January 201
2、6ICS 33.120.10 Supersedes EN 61196-2:2003English VersionCoaxial communication cables - Part 10: Sectional specificationfor semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric(IEC 61196-10:2014)Cbles coaxiaux de communication - Partie 10:Spcification intermdiaire relative aux cbles semi-
3、rigidesavec dilectrique en polyttrafluorothylne (PTFE)(IEC 61196-10:2014)Koaxiale Kommunikationskabel - Teil 10:Rahmenspezifikation fr halb-starre Kabel mitPolytetrafluorethylen- (PTFE-)Isolation(IEC 61196-10:2014)This European Standard was approved by CENELEC on 2015-10-05. CENELEC members are boun
4、d to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-
5、CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Cen
6、tre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy
7、, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektro
8、technische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 61196-10:2016 EBS EN 61196-10:2016BS EN 61196-10:2016 BRITISH STANDARDNational forewordThis Briti
9、sh Standard is the UK implementation of EN 61196-10:2016. It is identical to IEC 61196-10:2014, incorporating corrigendum February 2016. It supersedes BS EN 61196-2:2003 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguid
10、es, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its cor
11、rect application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 93585 5ICS 33.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Str
12、ategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affected31 March 2016 Implementation of IEC corrigendum February 2016: Subclause A.2.1.2 modifiedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61196-10 January 2016 ICS 33.120.10 Supersedes EN 61196-2:
13、2003 English Version Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-10:2014) Cbles coaxiaux de communication - Partie 10: Spcification intermdiaire relative aux cbles semi-rigides avec dilectrique en pol
14、yttrafluorothylne (PTFE) (IEC 61196-10:2014) Koaxiale Kommunikationskabel - Teil 10: Rahmenspezifikation fr halb-starre Kabel mit Polytetrafluorethylen- (PTFE-)Isolation (IEC 61196-10:2014) This European Standard was approved by CENELEC on 2015-10-05. CENELEC members are bound to comply with the CEN
15、/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Cen
16、tre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same stat
17、us as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania
18、, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Nor
19、mung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61196-10:2016 E Incorporating corrigendum February 2016EN 61196-10:2016 2 European foreword The text of docum
20、ent 46A/1213/FDIS, future edition 1 of IEC 61196-10, prepared by SC 46A “Coaxial cables“ of IEC/TC 46 “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61196-10:2016. The fo
21、llowing dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-22 This
22、document supersedes EN 61196-2:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International
23、Standard IEC 61196-10:2014 was approved by CENELEC as a European Standard without any modification. BS EN 61196-10:2016EN 61196-10:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in par
24、t, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been
25、modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-1 1988 Environmental testing - Part 1:
26、General and guidance EN 60068-1 1994 + A1 1992 - - IEC 61169-4 - Radio-frequency connectors - Part 4: R.F. coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 ohms (type 7-16) - - IEC 61196-1 2005 Coaxial communication cables - Part
27、 1: Generic specification - General, definitions and requirements - - IEC 61196-1-1 - Coaxial communication cables - Part 1-1: Capability approval for coaxial cables - - IEC 61196-1-101 - Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor DC resistance of cable -
28、 - IEC 61196-1-102 - Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric - - IEC 61196-1-103 - Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable - - IEC 61196-1-105 - Coaxial communic
29、ation cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric - - IEC 61196-1-108 - Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity - - IEC
30、61196-1-112 - Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance) - - IEC 61196-1-113 - Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant - - IEC 61196-1-115 - Coaxial communication cable
31、s - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss) - - IEC 61196-1-301 - Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality - - IEC 61196-1-302 - Coaxial communication cables - Part 1-302: Mechanical test me
32、thods - Test for eccentricity - - BS EN 61196-10:2016EN 61196-10:2016 2 European foreword The text of document 46A/1213/FDIS, future edition 1 of IEC 61196-10, prepared by SC 46A “Coaxial cables“ of IEC/TC 46 “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and acce
33、ssories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61196-10:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-22 latest dat
34、e by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-22 This document supersedes EN 61196-2:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held r
35、esponsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61196-10:2014 was approved by CENELEC as a European Standard without any modification. BS EN 61196-10:2016EN 61196-10:2016 3 Annex ZA (normative) Normative references to internatio
36、nal publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the
37、 referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is availabl
38、e here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-1 1988 Environmental testing - Part 1: General and guidance EN 60068-1 1994 + A1 1992 - - IEC 61169-4 - Radio-frequency connectors - Part 4: R.F. coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw l
39、ock - Characteristic impedance 50 ohms (type 7-16) - - IEC 61196-1 2005 Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements - - IEC 61196-1-1 - Coaxial communication cables - Part 1-1: Capability approval for coaxial cables - - IEC 61196-1-101 - Coaxi
40、al communication cables - Part 1-101: Electrical test methods - Test for conductor DC resistance of cable - - IEC 61196-1-102 - Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric - - IEC 61196-1-103 - Coaxial communication cables -
41、 Part 1-103: Electrical test methods - Test for capacitance of cable - - IEC 61196-1-105 - Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric - - IEC 61196-1-108 - Coaxial communication cables - Part 1-108: Electrical test methods - Te
42、st for characteristic impedance, phase and group delay, electrical length and propagation velocity - - IEC 61196-1-112 - Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance) - - IEC 61196-1-113 - Coaxial communication cables - Part 1-113
43、: Electrical test methods - Test for attenuation constant - - IEC 61196-1-115 - Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss) - - IEC 61196-1-301 - Coaxial communication cables - Part 1-301: Mechanical test met
44、hods - Test for ovality - - IEC 61196-1-302 - Coaxial communication cables - Part 1-302: Mechanical test methods - Test for eccentricity - - BS EN 61196-10:2016EN 61196-10:2016 4 IEC 61196-1-313 - Coaxial communication cables - Part 1-313: Mechanical test methods - Adhesion of dielectric and sheath
45、- - IEC 61196-1-314 - Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending - - IEC 61196-1-318 - Coaxial communication cables - Part 1-318: Mechanical test methods - Heat performance tests - - IEC 62037-4 2012 Passive RF and microwave devices, intermodulation level m
46、easurement - Part 4: Measurement of passive intermodulation in coaxial cables EN 62037-4 2012 IEC 62230 2006 Electric cables - Spark-test method EN 62230 2007 ISO 2859-1 1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot
47、-by-lot inspection - - BS EN 61196-10:2016 2 IEC 61196-10:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 6 4 Materials and cable construction . 6 4.1 Cable construction 6 4.2 Inner conductor . 6 4.3 Dielectric 7 4.4 Outer conductor 7 4.5 Sheath (when a
48、pplicable) 7 5 Standard rating and characteristics 7 5.1 Characteristic impendence 7 5.2 Rated temperature range 7 6 Identification, marking and labeling 8 6.1 Cable identification . 8 6.1.1 Type name 8 6.1.2 Variants . 8 6.2 IEC marking 8 6.3 Labelling . 8 7 Requirements of finished cables 8 7.1 Ge
49、neral . 8 7.2 Electrical requirements (see Table 1) 8 7.3 Environmental requirements (see Table 2) 10 7.4 Mechanical requirements (see Table 3) . 10 8 Delivery and storage 11 Annex A (informative) Quality assessment . 12 A.1 General . 12 A.2 Qualification approval and its maintenance . 12 A.2.2 Capability approval 14 A.2.3 Quality conformance inspection . 14 A.2.4 Periodic inspection 16 Bibliography 17 Table 1 Electrical requirements 9 Table 2 Environmental requirements 10 T
