1、Connectors for electrical and electronic equipment - Product requirementsPart 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (IEC 61076-3-104:2017)BS EN 61076-3-104:2017BSI Standards PublicationWB11885_BSI_StandardCov
2、s_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-3-104 September 2017 ICS 33.120.10 Supersedes EN 61076-3-104:2006 English Version Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shield
3、ed free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (IEC 61076-3-104:2017) Connecteurs pour quipements lectriques et lectroniques - Exigences de produit - Partie 3-104: Spcification particulire pour les fiches et les embases crantes 8 voies pour la transmission de do
4、nnes des frquences jusqu 2 000 MHz (IEC 61076-3-104:2017) Steckverbinder fr elektrische und elektronische Einrichtungen - Produktanforderungen - Teil 3-104: Bauartspezifikation fr geschirmte freie und feste Steckverbinder, 8-polig, fr Datenbertragungen bis 2 000 MHz (IEC 61076-3-104:2017) This Europ
5、ean Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
6、 concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENE
7、LEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav
8、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical
9、Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 6
10、1076-3-104:2017 E National forewordThis British Standard is the UK implementation of EN 61076-3-104:2017. It is identical to IEC 61076-3-104:2017. It supersedes BS EN 61076-3-104:2006, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/48, Electromech
11、anical components and mechanical structures for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applic
12、ation. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 80538 7ICS 33.120.10; 31.220.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Str
13、ategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 610763104:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-3-104 September 2017 ICS 33.120.10 Supersedes EN 61076-3-104:2006 English Version Connectors for electrica
14、l and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (IEC 61076-3-104:2017) Connecteurs pour quipements lectriques et lectroniques - Exigences de produit - Partie 3-1
15、04: Spcification particulire pour les fiches et les embases crantes 8 voies pour la transmission de donnes des frquences jusqu 2 000 MHz (IEC 61076-3-104:2017) Steckverbinder fr elektrische und elektronische Einrichtungen - Produktanforderungen - Teil 3-104: Bauartspezifikation fr geschirmte freie u
16、nd feste Steckverbinder, 8-polig, fr Datenbertragungen bis 2 000 MHz (IEC 61076-3-104:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the
17、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, F
18、rench, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austr
19、ia, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Sloveni
20、a, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rig
21、hts of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61076-3-104:2017 E BS EN 610763104:2017EN 61076-3-104:2017 2 European foreword The text of document 48B/2560/FDIS, future edition 3 of IEC 61076-3-104, prepared by SC 48B “Electrical connectors“, of
22、IEC/TC 48 “Electrical connectors and mechanical structures for electrical and electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61076-3-104:2017. The following dates are fixed: latest date by which the document has to be implemented at national level
23、by publication of an identical national standard or by endorsement (dop) 2018-03-29 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-09-29 This document supersedes EN 61076-3-104:2006. Attention is drawn to the possibility that some of the ele
24、ments of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61076-3-104:2017 was approved by CENELEC as a European Standard without any modification. In
25、the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-38 NOTE Harmonized as EN 60068-2-38. IEC 60512-25-9 NOTE Harmonized as EN 60512-25-9. IEC 60603-7 NOTE Harmonized as EN 60603-7. IEC 61196 NOTE Harmonized in EN 61196 series. BS EN 6
26、10763104:2017EN 61076-3-104:2017 2 European foreword The text of document 48B/2560/FDIS, future edition 3 of IEC 61076-3-104, prepared by SC 48B “Electrical connectors“, of IEC/TC 48 “Electrical connectors and mechanical structures for electrical and electronic equipment“ was submitted to the IEC-CE
27、NELEC parallel vote and approved by CENELEC as EN 61076-3-104:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-29 latest date by which the national standards
28、 conflicting with the document have to be withdrawn (dow) 2020-09-29 This document supersedes EN 61076-3-104:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all su
29、ch patent rights. Endorsement notice The text of the International Standard IEC 61076-3-104:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-38 NOTE H
30、armonized as EN 60068-2-38. IEC 60512-25-9 NOTE Harmonized as EN 60512-25-9. IEC 60603-7 NOTE Harmonized as EN 60603-7. IEC 61196 NOTE Harmonized in EN 61196 series. EN 61076-3-104:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European public
31、ations The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)
32、 applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title
33、EN/HD Year - - Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware EN 50289-1-14 - IEC 60050-581 - International Electrotechnical Vocabulary - Part 581: Electromechanical components for ele
34、ctronic equipment - - IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 60169-15 - Radio-frequency connectors - Part 15: R.F. coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling - Characteristic impedance 50 ohms (Type SM
35、A) - - IEC 60352-2 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance EN 60352-2 - IEC 60352-3 - Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practic
36、al guidance EN 60352-3 - IEC 60352-4 - Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance EN 60352-4 - BS EN 610763104:2017EN 61076-3-104:2017 4 Publication Year Title EN/HD Year IEC 60352-5 - Sol
37、derless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance EN 60352-5 - IEC 60352-6 - Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance EN 60352-6 - IEC 60352-7 - Solderless
38、 connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance EN 60352-7 - IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 - IEC 60512-1-2 - Connector
39、s for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass EN 60512-1-2 - IEC 60512-2-1 - Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Conta
40、ct resistance - Millivolt level method EN 60512-2-1 - IEC 60512-2-5 - Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance EN 60512-2-5 - IEC 60512-3-1 - Connectors for electronic equipment - Tests
41、and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance EN 60512-3-1 - IEC 60512-4-1 - Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof EN 60512-4-1 - IEC 60512-6-4 - Connectors for electronic equipment - Te
42、sts and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) EN 60512-6-4 - IEC 60512-9-1 - Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation EN 60512-9-1 - IEC 60512-9-2 - Connectors for electronic equ
43、ipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature EN 60512-9-2 - BS EN 610763104:2017EN 61076-3-104:2017 4 Publication Year Title EN/HD Year IEC 60352-5 - Solderless connections - Part 5: Press-in connections - General requirements, test methods a
44、nd practical guidance EN 60352-5 - IEC 60352-6 - Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance EN 60352-6 - IEC 60352-7 - Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and
45、practical guidance EN 60352-7 - IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 - IEC 60512-1-2 - Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Tes
46、t 1b: Examination of dimension and mass EN 60512-1-2 - IEC 60512-2-1 - Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method EN 60512-2-1 - IEC 60512-2-5 - Connectors for elec
47、tronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance EN 60512-2-5 - IEC 60512-3-1 - Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance EN 60512-3
48、-1 - IEC 60512-4-1 - Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof EN 60512-4-1 - IEC 60512-6-4 - Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) E
49、N 60512-6-4 - IEC 60512-9-1 - Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation EN 60512-9-1 - IEC 60512-9-2 - Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature EN 60512-9-2 - EN 61076-3-104:2017 5 Publication Year Title EN/HD Year IEC 60512-11-4 - Connectors for electronic equipment - Tests and measur
