1、BSI Standards PublicationBS EN 16069:2012Thermal insulation productsfor buildings Factory madeproducts of polyethylene foam(PEF) SpecificationBS EN 16069:2012+A1:2015BS EN 16069:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16069:2012+A1:2015. It
2、supersedes BS EN 16069:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participa
3、tion in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of
4、a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86750 7ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under
5、the authority of the Standards Policy and Strategy Committee on 31 December 2012.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16069:2012+A1 February 2015 ICS 91.100.60 Superse
6、des EN 16069:2012English Version Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse de polyethylene (PE) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestell
7、te Produkte aus Polyethylenschaum (PEF) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
8、European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official ver
9、sions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria
10、, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
11、Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN na
12、tional Members. Ref. No. EN 16069:2012+A1:2015 EEN 16069:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviated terms .9 3.1 Terms and definitions .9 3.2 Symbols, units and abbreviated terms . 10 3.2.1 Symbols and units use
13、d in this European Standard 10 3.2.2 Abbreviated terms used in this European Standard: 12 4 Requirements 12 4.1 General . 12 4.2 For all applications . 12 4.2.1 Thermal resistance and thermal conductivity . 12 4.2.2 Length and width 13 4.2.3 Thickness 13 4.2.4 Squareness 14 4.2.5 Flatness . 14 4.2.6
14、 Reaction to fire of the product as placed on the market 14 4.2.7 Durability characteristics . 15 4.3 For specific applications 15 4.3.1 General . 15 4.3.2 Dimensional stability 15 4.3.3 Compressive stress or compressive strength 16 4.3.4 Tensile strength and elongation in length and width . 16 4.3.
15、5 Point load . 17 4.3.6 Compressive creep . 17 4.3.7 Water absorption 17 4.3.8 Water vapour transmission . 17 4.3.9 Dynamic stiffness . 18 4.3.10 Compressibility . 18 4.3.11 Sound absorption . 19 4.3.12 Width length and thickness of preformed products . 19 4.3.13 Release of dangerous substances 20 4
16、.3.14 Reaction to fire of the product in standardized assemblies simulating end-use applications . 20 4.3.15 Continuous glowing combustion 21 5 Test methods . 21 5.1 Sampling 21 5.2 Conditioning 21 5.3 Testing . 21 5.3.1 General . 21 5.3.2 Thermal resistance and thermal conductivity . 21 6 Designati
17、on Code . 23 7 Assessment and Verification of the Constancy of Performance (AVCP) . 24 7.1 General . 24 7.2 Product Type Determination (PTD) . 24 7.3 Factory Production Control (FPC) 24 8 Marking and labelling . 25 BS EN 16069:2012+A1:2015EN 16069:2012+A1:2015 (E)EN 16069:2012+A1:2015 (E) 2 Contents
18、 Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviated terms .9 3.1 Terms and definitions .9 3.2 Symbols, units and abbreviated terms . 10 3.2.1 Symbols and units used in this European Standard 10 3.2.2 Abbreviated terms used in this European Standar
19、d: 12 4 Requirements 12 4.1 General . 12 4.2 For all applications . 12 4.2.1 Thermal resistance and thermal conductivity . 12 4.2.2 Length and width 13 4.2.3 Thickness 13 4.2.4 Squareness 14 4.2.5 Flatness . 14 4.2.6 Reaction to fire of the product as placed on the market 14 4.2.7 Durability charact
20、eristics . 15 4.3 For specific applications 15 4.3.1 General . 15 4.3.2 Dimensional stability 15 4.3.3 Compressive stress or compressive strength 16 4.3.4 Tensile strength and elongation in length and width . 16 4.3.5 Point load . 17 4.3.6 Compressive creep . 17 4.3.7 Water absorption 17 4.3.8 Water
21、 vapour transmission . 17 4.3.9 Dynamic stiffness . 18 4.3.10 Compressibility . 18 4.3.11 Sound absorption . 19 4.3.12 Width length and thickness of preformed products . 19 4.3.13 Release of dangerous substances 20 4.3.14 Reaction to fire of the product in standardized assemblies simulating end-use
22、applications . 20 4.3.15 Continuous glowing combustion 21 5 Test methods . 21 5.1 Sampling 21 5.2 Conditioning 21 5.3 Testing . 21 5.3.1 General . 21 5.3.2 Thermal resistance and thermal conductivity . 21 6 Designation Code . 23 7 Assessment and Verification of the Constancy of Performance (AVCP) .
23、24 7.1 General . 24 7.2 Product Type Determination (PTD) . 24 7.3 Factory Production Control (FPC) 24 8 Marking and labelling . 25 EN 16069:2012+A1:2015 (E) 3 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 26 A.1 General . 26 A.2 Input data
24、26 A.3 Declared values . 26 A.3.1 General . 26 A.3.2 Case where thermal resistance and thermal conductivity are declared . 26 A.3.3 Case where only thermal resistance is declared . 27 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) 28 Annex C (normative)
25、 PEF multilayered insulation products 31 C.1 General . 31 C.2 Requirements . 31 C.2.1 For all applications 31 C.2.2 For specific applications 32 C.3 Test methods . 32 C.4 Evaluation of conformity 32 Annex D (informative) Examples for the determination of the declared values of thermal resistance and
26、 thermal conductivity for a product or a product group 33 D.1 Case where both thermal resistance and thermal conductivity are declared . 33 D.2 Case where only thermal resistance is declared . 34 Annex E (informative) Additional properties 36 E.1 General . 36 E.2 Deformation under specific compressi
27、ve load and temperature conditions 36 E.3 Compression modulus of elasticity . 36 E.4 Bending strength . 36 E.5 Apparent density . 36 E.6 Compressive stress at defined deformation 37 E.7 Air flow resistivity 37 E.8 Cyclic load behaviour . 37 E.9 Shear behaviour 37 E.10 Peel strength 37 Annex ZA (info
28、rmative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 39 ZA.1 Scope and relevant characteristics . 39 ZA.2 Procedures for AVCP of factory made polyethylene foam products . 40 ZA.2.1 Systems of AVCP 40 ZA.2.2 Declaration of Performance (DoP)
29、 . 44 ZA.3 CE Marking and labelling 47 BS EN 16069:2012+A1:2015EN 16069:2012+A1:2015 (E)EN 16069:2012+A1:2015 (E) 4 Bibliography . 49 Tables Table 1 Level and classes for dimensional tolerances . 14 Table 2 Dimensional stability under specified temperature and humidity conditions 16 Table 3 Classes
30、for thickness tolerances . 18 Table 4 Levels for compressibility 19 Table 5 Levels for dimensions of preformed products . 20 Table 6 Test methods, test specimens and conditions. 22 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 27 Table B.1 Minimum num
31、ber of tests for !PTD“ and minimum product testing frequencies . 28 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 30 Table D.1 test results . 33 Table D.2 R test results 34 Table E.1 Levels of bending strength . 36 Table E.2 Levels for compressive stress at a
32、 defined deformation . 37 Table E.3 Test methods, test specimens, conditions and minimum testing frequencies . 38 Table ZA.1 Relevant clauses for factory made polyethylene foam and intended use . 39 Table ZA.2 Systems of AVCP . 41 Table ZA.3.1 Assignment of AVCP tasks for factory made polyethylene f
33、oam products under system 1 for reaction to fire and system 3 (see Table ZA.2) 41 Table ZA.3.2 Assignment of AVCP tasks for factory made polyethylene foam products under system 3 (see Table ZA.2) 43 Table ZA.3.3 Assignment of AVCP tasks for factory made polyethylene foam products under combined syst
34、em 4 for reaction to fire and system 3 (see Table ZA.2) 43 Figures Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3 . 48 BS EN 16069:2012+A1:2015EN 16069:2012+A1:2015 (E)EN 16069:2012+A1:2015 (E) 4 Bibliography . 49 Tables Table 1 Level and classes for dimensio
35、nal tolerances . 14 Table 2 Dimensional stability under specified temperature and humidity conditions 16 Table 3 Classes for thickness tolerances . 18 Table 4 Levels for compressibility 19 Table 5 Levels for dimensions of preformed products . 20 Table 6 Test methods, test specimens and conditions. 2
36、2 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 27 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 28 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 30 Table D.1 test result
37、s . 33 Table D.2 R test results 34 Table E.1 Levels of bending strength . 36 Table E.2 Levels for compressive stress at a defined deformation . 37 Table E.3 Test methods, test specimens, conditions and minimum testing frequencies . 38 Table ZA.1 Relevant clauses for factory made polyethylene foam an
38、d intended use . 39 Table ZA.2 Systems of AVCP . 41 Table ZA.3.1 Assignment of AVCP tasks for factory made polyethylene foam products under system 1 for reaction to fire and system 3 (see Table ZA.2) 41 Table ZA.3.2 Assignment of AVCP tasks for factory made polyethylene foam products under system 3
39、(see Table ZA.2) 43 Table ZA.3.3 Assignment of AVCP tasks for factory made polyethylene foam products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 43 Figures Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3 . 48 EN 16069:2012+A1:20
40、15 (E) 5 Foreword This document (EN 16069:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identi
41、cal text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held r
42、esponsible for identifying any or all such patent rights. This document supersedes !EN 16069:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared u
43、nder a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ !Amendment
44、1 modifies EN 16069:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an addition to the foreword; b) an addition in 3.2; c) an addition in 4.3.10.2; d) a new subc
45、lause 4.3.13; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex B; h) modification of Annex E; i) a new Annex ZA.“ This document is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appr
46、opriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. BS EN 16069:2012+A1:2015EN 16069:2012+A1:2015 (E)EN 16069:2012+A1:2015 (E) 6 According to the
47、CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun
48、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16069:2012+A1:2015EN 16069:2012+A1:2015 (E)EN 16069:2012+A1:2015 (E) 6 According to the CEN/CENELE
49、C Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 1
