1、Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataPart 007: Terms and ReferencesBS EN 9300007:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROP
2、ISCHE NORM EN 9300-007 October 2017 ICS 35.240.30; 01.110; 35.240.60; 49.020 English Version Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References Srie arospatiale - LOTAR - Archivage long
3、terme et rcupration des donnes techniques produits numriques telles que CAD 3D et PDM - Partie 007 : Termes and rferences Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten - Teil 007: Beg
4、riffe und Verweisungen This European Standard was approved by CEN on 16 July 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and
5、 bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r
6、esponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav
7、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUR
8、OPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 9300-007:2017 ENational forewordThis British Standard is the
9、 UK implementation of EN 9300007:2017.The UK participation in its preparation was entrusted to Technical Committee ACE/1, International and European Aerospace Policy and Processes.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does
10、not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 98455 6ICS 35.240.30; 49.020; 01.110; 35.240.60Compliance with a British Standard cannot
11、confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 9300007:2017EUROPEAN STANDARD NORME EUROPENNE EUROPIS
12、CHE NORM EN 9300-007 October 2017 ICS 35.240.30; 01.110; 35.240.60; 49.020 English Version Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References Srie arospatiale - LOTAR - Archivage long te
13、rme et rcupration des donnes techniques produits numriques telles que CAD 3D et PDM - Partie 007 : Termes and rferences Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten - Teil 007: Begri
14、ffe und Verweisungen This European Standard was approved by CEN on 16 July 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b
15、ibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the res
16、ponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav R
17、epublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROP
18、EN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 9300-007:2017 EBS EN 9300007:2017EN 9300-007:2017 (E) 2 Conten
19、ts Page European foreword . 3 Foreword 4 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviations . 5 4 Part specific terms, definitions and abbreviations 21 5 Applicability . 21 Bibliography . 22 BS EN 9300007:2017EN 9300-007:2017 (E) 3 European foreword This document (EN 9300-007:
20、2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services o
21、f the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be withdrawn at the latest by
22、April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations o
23、f the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net
24、herlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 9300007:2017EN 9300-007:2017 (E) 4 Foreword This standard was prepared jointly by AIA, ASD-STAN, PDES Inc and the PROSTEP iViP Association. The PROSTEP iViP Assoc
25、iation is an international non-profit association in Europe. For establishing leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from leading industries, system vendors and research institutions. Its product and process data standardization activities at Euro
26、pean and worldwide levels are well known and accepted. The PROSTEP iViP Association sees this standard and the related parts as a milestone of product data technology. PDES Inc is an international non-profit association in USA. The mission of PDES Inc is to accelerate the development and implementat
27、ion of ISO 10303, enabling enterprise integration and PLM interoperability for member companies. PDES Inc gathers members from leading manufacturers, national government agencies, PLM vendors and research organizations. PDES Inc. supports this standard as an industry resource to sustain the interope
28、rability of digital product information, ensuring and maintaining authentic longevity throughout their product lifecycle. Readers of this standard should note that all standards undergo periodic revisions and that any reference made herein to any other standard implies its latest edition, unless oth
29、erwise stated. The Standards will be published under two different standards organizations using different prefixes. ASD-Stan will publish the standard under the number EN 9300xxx. AIA will publish the standard under the number NAS 9300xxx. The content in the EN 9300 and NAS 9300 documents will be t
30、he same. The differences will be noted in the reference documentation (i.e. for EN 9300 Geometric Dimensioning the MBD dataset includes all Engineering Intent requirements (including Process Specifications, Geometric Dimensioning and Tolerancing (GD the MBD dataset defines complete requirements for
31、a product in its nominal condition as well as permissible limits of variation and other acceptance criteria, providing all the data needed to plan, fabricate, and validate an article of product hardware 3.1.2 access from the OAIS model, the process of recovering data from the archive BS EN 9300007:2
32、017EN 9300-007:2017 (E) 6 3.1.3 Application Activity Model AAM from STEP, the model of activities that defines the context for a particular application protocol 3.1.4 Application Interpreted Model AIM one of the STEP information models, historically used as the basis for implementation 3.1.5 Applica
33、tion Protocol AP from STEP, one of the major parts of the standard that provides an implementable data exchange in a particular context 3.1.6 Application Reference Model ARM from STEP, an information model that describes the information requirements and constraints of a specific application context
34、3.1.7 archival storage from the OAIS model, the process that ensures data remains available for access 3.1.8 archive repository for historical information 3.1.9 archive any repository conforming to the OAIS standard Note 1 to entry: This is the preferred sense in the LOTAR documentation. 3.1.10 arti
35、cle see product, part, item and article 3.1.11 authentication ensuring something is what it purports to be 3.1.12 authentication in security, ensuring the claims to identity of one party are proven to the satisfaction of another 3.1.13 audit trail information collected during the execution of a proc
36、ess that shows what actually occurred BS EN 9300007:2017EN 9300-007:2017 (E) 7 3.1.14 certification the process of assessing a process or product against some particular set of criteria 3.1.15 certification the particular process of certifying an aircraft type as being airworthy Note 1 to entry: For
37、 clarity, LOTAR uses the term “Type Certification” in this context. 3.1.16 business application software creating and generating native Product Models SOURCE: see EN 9300-003, 3.2.3 3.1.17 configuration management discipline of managing the information relating to a product design, encompassing chan
38、ge management, configuration identification, status accounting and audit Note 1 to entry: This is the preferred sense in the aircraft industry, and in the EN 9300 documentation. 3.1.18 configuration management rules relating to the choice and combinations of options used when configuring a particula
39、r physical example of a product 3.1.19 consumer from OAIS, the user of data taken from an archive (see also designated community) 3.1.20 cyclic redundancy check method for checking the integrity of a set of digital data 3.1.21 data object collection of data treated as a single unit, such as a CAD mo
40、del or file 3.1.22 dated or undated reference reference to a version controlled document. In a dated reference, the particular version is identified by its date of issue. In an undated reference, the particular version is the latest released version 3.1.23 description method (usually formal) method
41、of describing information and its structure 3.1.24 designated community from OAIS, the community for which the system is designed. In the case of EN 9300, it is the community that will use the information retained in an archive BS EN 9300007:2017EN 9300-007:2017 (E) 8 3.1.25 digital signature see el
42、ectronic signature 3.1.26 disaster recovery recovery of the archive in the event of major failure or destruction of the archive 3.1.27 document this term covers a family of usages, from a physical paper document, through electronic files which can be thought as representing a document, to synthetic
43、view derived from multiple sources for which the users conceptual model is that of reading a document; see also EN 9300-003, 5.3.1 “Archiving Product Models vs. Archiving Documents” 3.1.28 domain specific part LOTAR parts are either general or domain specific. LOTAR parts 100 upwards are the domain
44、specific parts, and deal with the particularities of each type of data such as 3D CAD; the general parts (1 to 99) apply to all types of data 3.1.29 electronic signature defined method to sign an object in electronic environments; it provides means to authenticate the signatory and the signed object
45、 in an unambiguous and safe way by attaching to or logically associating data in electronic form to other electronic objects (See EN 9300-005) 3.1.30 essential information information that must be preserved, as relating to the key characteristics (qv) of some aircraft component 3.1.31 evidential wei
46、ght from Code of Practice (CoP) for Legal Admissibility, in the case where electronic information is used as evidence in a court case, the degree of reliance that the information is what it purports to be 3.1.32 explicit (as in explicit geometry) where each geometric element is defined in terms of t
47、he space it exists in, e.g. a line is defined by its end points; in parametric geometry, the elements are defined through a construction procedure, so that if the parameters change, the element itself changes e.g. a line is defined as being the normal to a face from its centre Note 1 to entry: an ex
48、plicit geometric element may be constructed manually by some procedure, but subsequent changes to the starting entities of the procedure do not change the element 3.1.33 EXPRESS from STEP, a formal data modelling language, defined in ISO 10303-11 BS EN 9300007:2017EN 9300-007:2017 (E) 9 3.1.34 EXPRE
49、SS-G from STEP, a diagrammatic form of EXPRESS 3.1.35 Extensible Mark-up Language XML a mark-up language, used to identify fields within a file that can be processed by a web Browser; STEP provides an XML binding for APs 3.1.36 file named collection of data managed as a single unit at the level of a computer operating system 3.1.37 first article inspection organizations system shall provide a process for the inspection, verification, and documentation of a representative item from the first production run of a new part, or following any subse
