1、BRITISH STANDARDBS EN 13476-1:2007Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: General requirements and performance characteristicsThe European
2、 Standard EN 13476-1:2007 has the status of a British StandardICS 23.040.20; 93.030g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13476-1:200
3、7This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007ISBN 978 0 580 53026 5National forewordThis British Standard is the UK implementation of EN 13476-1:2007. It does not supersede any current British Standards. However, the
4、Water Industry has indicated that following the publication of this British Standard, Industry Specification WIS 4-35-01 will be declared obsolescent by May 2009 and retained for reference where applicable. The UK participation in its preparation was entrusted by Technical Committee PRI/88, Plastics
5、 piping systems and components, to Subcommittee PRI/88/1, Thermoplastics piping systems and components for non-pressure applications. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Sewerage undertakers and other entities deemed to be within the
6、scope of the Public Procurement Directive (PPD) are obliged to use Parts 1 to 3 of this series of European Standards, produced under EC/U mandate, if they are to comply with structured wall pipe systems or components within its scope. National Annex NA (informative) gives additional guidance on the
7、use of Parts 1 to 3 of BS EN 13476:2007. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publicationAm
8、d. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13476-1May 2007ICS 93.030English VersionPlastics piping systems for non-pressure underground drainageand sewerage - Structured-wall piping systems of unplasticizedpoly(vinyl chloride) (PVC-U), polypropylene (PP) andpolyethylene (P
9、E) - Part 1: General requirements andperformance characteristicsSystmes de canalisations en plastique pour lesbranchements et les collecteurs dassainissements sanspression enterrs - Systmes de canalisation paroisstructures en poly(chlorure de vinyle) non plastifi (PVC-U), polypropylne (PP) et polyth
10、ylne (PE) - Partie 1:Exigences gnrales et caractristiques de performanceKunststoff-Rohrleitungssysteme fr erdverlegte druckloseAbwasserkanle und -leitungen - Rohrleitungssysteme mitprofilierter Wandung aus weichmacherfreiemPolyvinylchlorid (PVC-U), Polypropylen (PP) undPolyethylen (PE) - Teil 1: All
11、gemeine Anforderungen undLeistungsmerkmaleThis European Standard was approved by CEN on 5 March 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-
12、to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder
13、 the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hung
14、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: ru
15、e de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13476-1:2007: EEN 13476-1:2007 (E) 2 Contents Page Foreword 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions, symbols a
16、nd abbreviations 7 3.1 Definitions 7 3.1.1 General definitions 7 3.1.2 Geometrical definitions 8 3.2 Symbols and abbreviations 9 4 Material 10 4.1 General 10 4.2 Utilisation of non-virgin material 10 4.3 Sealing ring retaining components 10 4.4 Sealing rings 10 4.5 Fused or welded joints 10 5 Design
17、ation of wall construction 10 6 Appearance and colour 10 6.1 Appearance 10 6.2 Colour 11 7 Geometrical characteristics 11 8 Types of fittings 11 8.1 General 11 8.2 Design length of fittings 14 9 System performance related test methods and characteristics 14 10 Marking, general 16 10.1 Presentation 1
18、6 10.2 Marking process 16 10.3 Size 16 Annex A (informative) Characteristics of PVC-U, PP and PE pipes and fittings 17 A.1 General 17 A.2 Material characteristics 17 A.3 Chemical resistance 17 A.4 Abrasion resistance 18 A.5 Hydraulic roughness 18 Annex B (informative) Structural design 19 B.1 Genera
19、l 19 B.2 Structural design based on practical experience 19 B.3 Structural design based on a design calculations 21 B.4 Selection of fitting stiffness or class 21 Annex C (informative) Designation of pipes and corresponding fittings 23 Annex D (informative) Guidance in cleaning plastics pipes 24 D.1
20、 Introduction 24 D.2 Cleaning and unblocking 24 EN 13476-1:2007 (E) 3 D.2.1 Choosing the right equipment 24 D.2.2 Comparing techniques 24 D.3 Conclusions from independent jetting tests 25 D.3.1 Assessing efficiency and impact 25 D.3.2 Testing of plastic pipes 25 D.3.3 Clearing tests 25 D.4 Supplemen
21、tary cleaning techniques 26 D.5 Recommended practice principles for jetting 26 Bibliography 28 National Annex NA (informative) to BS EN 13476-1:200730 Additional guidance for UK usersEN 13476-1:2007 (E) 4 Foreword This document (EN 13476-1:2007) has been prepared by Technical Committee CEN/TC 155 “P
22、lastics piping systems and ducting systems”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2007, and conflicting national standards shall be wit
23、hdrawn at the latest by November 2007. This standard is a part of a System Standard for plastics piping systems of particular materials for specified applications. There are a number of such System Standards. System Standards are based on the results of the work being undertaken in ISO/TC 138 “Plast
24、ics pipes, fittings and valves for the transport of fluids”, which is a Technical Committee of the International Organization for Standardization (ISO). They are supported by separate standards on test methods to which references are made throughout the System Standard. The System Standards are cons
25、istent with general standards on functional requirements and on recommended practice for installation. EN 13476 consists of the following Parts under the general title Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(viny
26、l chloride) (PVC-U), polypropylene (PP) and polyethylene (PE): Part 1: General requirements and performance characteristics (this standard); Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A; Part 3: Specifications for pipes and fittings w
27、ith smooth internal and profiled external surface and the system, Type B; Part 4: Assessment of conformity (CEN/TS); Part 5: Guidance for installation (CEN/TS).1For pipes and fittings which have conformed to the relevant national standard before May 2007, as shown by the manufacturer or by a certifi
28、cation body, the national standard may continue to be applied until May 2009. National standards specifically for pipes and fittings for the transport of surface water are not considered to be conflicting with this standard and may thus be allowed to coexist. According to the CEN/CENELEC Internal Re
29、gulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne
30、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1The feasibility of this project is under study. EN 13476-1:2007 (E) 5 Introduction Due to the variety in materials, pipe constructions, application areas and classes, several combination
31、s are possible. The purchaser or specifier may select between these possibilities by designating the pipe and fitting he or she prefers to use for each case, as described in Annex C, Designation of pipes and corresponding fittings, taking into account any particular requirements and relevant nationa
32、l regulations and installation practices or codes. EN 13476-1:2007 (E) 6 1 Scope This European Standard, together with EN 13476-2 and EN 13476-3, specifies the definitions and general requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (
33、PP) and polyethylene (PE) structured-wall piping systems that are to be used for non-pressure underground drainage and sewerage systems. This standard is applicable to: a) structured-wall pipes and fittings, which are to be used buried in the ground outside a building structure only; reflected by th
34、e marking of products by “U”; b) structured-wall pipes and fittings, which are to be used buried in ground both outside (application area code “U”) and within a building structure (application area code “D”); reflected in the marking of products by “UD”. In conjunction with EN 13476-2 and EN 13476-3
35、 it is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints, as well as welded and fused joints. This part specifies general aspects and gives guidance concerning a national selection of requirement levels and classes where part 2 and
36、part 3 of this standard provide options. EN 13476-2 and EN 13476-3 specify material characteristics, dimensions and tolerances, test methods, test parameters and requirements for pipes with smooth internal and external surfaces, Type A, and pipes with smooth internal and profiled external surfaces,
37、Type B. This standard, together with EN 13476-2 and EN 13476-3, covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes and tolerance classes and offers recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the ap
38、propriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. NOTE 2 Pipes, fittings and other components conforming to any plastic product standards referred to in clause 2 can be used with pipes
39、 and fittings conforming to this standard, when they conform to the requirements for joint dimensions given in part 2 and part 3 of this standard and to the performance requirements given in Clause 9. NOTE 3 For dimensions larger than DN 1200 OD/ID this document may serve as general guideline regard
40、ing appearance, colour, physical and mechanical characteristics as well as performance requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the lat
41、est edition of the referenced document (including any amendments) applies. EN 681-1, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber EN 681-2, Elastomeric seals Materials requirements for pipe joint seals used in water a
42、nd drainage applications Part 2: Thermoplastic elastomers EN 681-4, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 4: Cast polyurethane sealing elements EN 13476-2:2007, Plastics piping systems for non-pressure underground drainage and sewe
43、rage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A EN 13476-1:2007 (E) 7 EN 13476-3:2007, Plastics piping system
44、s for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B EN I
45、SO 472:2001, Plastics Vocabulary (ISO 472:1999) EN ISO 1043-1:2001, Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001) EN ISO 9969, Thermoplastics pipes Determination of ring stiffness (ISO 9969:1994) ISO 11922-1:1997, Thermoplastics
46、 pipes for the conveyance of fluids Dimensions and tolerances Part 1: Metric series ISO 13967, Thermoplastics fittings Determination of ring stiffness 3 Terms and definitions, symbols and abbreviations For the purposes of this standard, the terms and definitions given in EN ISO 472:2001, EN ISO 1043
47、-1:2001, ISO 11922-1:1997 and the following apply. 3.1 Definitions 3.1.1 General definitions 3.1.1.1 application area code code used to mark pipes and fittings to indicate the permitted application area(s) for which they are intended, as follows: U: code for the area more than 1 m from the building
48、to which the buried piping system is connected; D: code for the area under and within 1 m from the building where the pipes and fittings are buried underground and are connected to the soil and waste discharge system of the building NOTE In the “D” application area, the existence of hot water discha
49、rge in addition to external forces from the surroundings is usual. 3.1.1.2 structured-wall pipes and fittings products which have an optimised design with regard to material usage to achieve the physical, mechanical and performance requirements of this standard NOTE For a description of the particular designs covered by this standard, see clause 5 in EN 13476-2:2007 and EN 13476-3:2007. 3.1.1.3 fabricated fitting fitting manufactured by heat forming and/or joining more than one piece of pipe and/or moulded component NOTE Sealed rin
