1、BRITISH STANDARDBS EN 13363-1:2003Incorporating corrigendumDecember 2008 Solar protection devices combined with glazing Calculation of solar and light transmittance Part 1: Simplified methodICS 17.180.20; 91.120.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54
2、g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2007 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Nationa
3、l forewordThis British Standard is the UK implementation of EN 13363-1:2003+A1:2007, incorporating corrigendum December 2008.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. Fo
4、r example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee B/540, Energy performance of materials, components and buildings.A list of organizations represented on this committee can be obtained on request to its secreta
5、ry.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 13363-1:2003+A1:2007This British Standard was published under the autho
6、rity of the Standards Policy and Strategy Committee on 20 August 2003 BSI 2010Amendments/corrigenda issued since publicationAmd. No. Date Comments 17366 28 September 2007 Implementation of CEN amendment A1:200731 January 2010 Implementation of CEN corrigendum December 2008, equations a) and b) in An
7、nex B replacedISBN 978 0 580 70412 3Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13363-1:2003+A1 July 2007 ICS 17.180.20;
8、91.120.10 Supersedes EN 13363-1:2003English Version Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method Dispositifs de protection solaire combins des vitrages - Calcul du facteur de transmission solaire et lumineuse - Partie 1: Mt
9、hode simplifie Sonnenschutzeinrichtungen in Kombination mit Verglasungen - Berechnung der Solarstrahlung und des Lichttransmissionsgrades - Teil 1: Vereinfachtes VerfahrenThis European Standard was approved by CEN on 7 May 2003 and includes Amendment 1 approved by CEN on 24 May 2007. CEN members are
10、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t
11、he CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
12、 status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro
13、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reser
14、ved worldwide for CEN national Members. Ref. No. EN 13363-1:2003+A1:2007: EIncorporating corrigendum December 2008Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13363-1:2003+
15、A1:2007 (E) 2 Contents Foreword3 1 Scope 3 2 Normative references 4 3 Terms, definitions, symbols and units 4 4 Characteristic data.5 4.1 Glazing 5 4.2 Solar protection devices .5 5 Total solar energy transmittance .6 5.1 External solar protection device 7 5.2 Internal solar protection device .7 5.3
16、 Integrated solar protection device.8 6 Light transmittance9 7 Solar direct transmittance 10 Annex A (informative) Data for typical glazing and solar protection devices.11 Annex B (informative) Example of calculation of a solar protection device in combination with glazing 12 !Bibliography“.13 BS EN
17、 13363-1:2003+A1:2007Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13363-1:2003+A1:2007 (E) 3 Foreword This document (EN 13363-1:2003+A1:2007) has been prepared by Technical
18、 Committee CEN /TC 89, “Thermal performance of buildings and building components“ the secretariat of which is held by SIS. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008 and conflicting natio
19、nal standards shall be withdrawn at the latest by January 2008. This document includes Amendment 1 approved by CEN on 2007-05-24. This document supersedes EN 13363-1:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. Annexes A and B are inform
20、ative. This standard consists of two parts: Part 1: Simplified method Part 2: !Detailed calculation method“ Due to the improved thermal properties of insulating glass units an adaptation of the notional parameter G was necessary. The scope of the standard was made more precise.“ According to the CEN
21、/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
22、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1 Scope This European Standard specifies a simplified method based on the thermal transmittance and total solar energy transmittance of the glazing and on the light tr
23、ansmittance and reflectance of the solar protection device to estimate the total solar energy transmittance of a solar protection device combined with glazing. The method applies to all types of solar protection devices parallel to the glazing such as louvre, venetian or roller blinds. The position
24、of the solar protection device can be interior, exterior or between single panes in a dual glazing system. It is applicable when the total solar energy transmittance of the glazing is between 0,15 and 0,85. Venetian or louvre blinds are assumed to be adjusted so that there is no direct solar penetra
25、tion. It is assumed that for external solar protection devices and for integrated solar protection devices, the space between the solar protection devices and the glazing is unventilated and for internal solar protection devices this space is ventilated. !The resulting g-values of the simplified met
26、hod given here are approximate and their deviation from the exact values lie within the range between +0,10 and -0,02. The results generally tend to lie on the safe side for cooling load estimations. The results are not intended to be used for calculating beneficial solar gains or thermal comfort cr
27、iteria. The simplified method is based on the normal incidence of radiation and does not take into account either the angular dependence of transmittance and the reflectance or the differences of spectral distribution. BS EN 13363-1:2003+A1:2007Copyright European Committee for Standardization Provid
28、ed by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13363-1:2003+A1:2007 (E) 4 This standard can be applied when the solar transmittance and solar reflectance of the solar protection devices are within the following ranges: 0 e,B 0,5
29、and 0,1 e,B 0,8 For reflectance and transmittance values outside these ranges EN 13363-2 1 applies. An allowance can be made for this fact when applying the method. For cases not covered by the method given in this standard more exact calculations based on the optical properties (in general the spec
30、tral data) of glass and solar protection device can be carried out in accordance with EN 13363-2 1.“ 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the tex
31、t, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to appli
32、es (including amendments). EN 410:1998, Glass in building Determination of luminous and solar characteristics of glazing. EN 673, Glass in building Determination of thermal transmittance (U value) Calculation method. EN 674, Glass in building Determination of thermal transmittance (U value) Guarded
33、hot plate method. EN 675, Glass in building Determination of thermal transmittance (U value) Heat flow meter method. EN ISO 7345:1995, Thermal insulation Physical quantities and definitions (ISO 7345:1987). 3 Terms, definitions, symbols and units For the purposes of this European Standard, the terms
34、 and definitions given in EN 410:1998 and EN ISO 7345:1995 apply. Symbols are given in Table 1. Subscripts are given in Table 2. Table 1 Symbols and units Symbol Quantity Unit g total solar energy transmittance U thermal transmittance W/(m2K) G thermal conductance W/(m2K) absorptance reflectance tra
35、nsmittance BS EN 13363-1:2003+A1:2007!Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13363-1:2003+A1:2007 (E) 5 Table 2 Subscripts Subscript Definition B solar protection dev
36、ice e external g glazing t total v visible 4 Characteristic data 4.1 Glazing Glazing is characterised by the following quantities: Ugthermal transmittance of the glazing; g total solar energy transmittance; vlight transmittance of the glazing; vlight reflectance of the side of the glazing facing the
37、 incident radiation; v light reflectance of the side of the glazing facing away from incident radiation. e solar direct transmittance of the glazing e solar direct reflectance of the side of the glazing facing the indent radiation e solar direct reflectance of the side of the glazing facing away fro
38、m the incident radiation Ugshall be determined according to EN 673, EN 674 or EN 675. g, vand vshall be determined according to EN 410. If no detailed data are available, typical data for glazing, indicated in Table A.1, may be used. 4.2 Solar protection devices Solar protection devices are characte
39、rised by the values of transmittance and reflectance for solar radiation and the values of light transmittance and reflectance (see Figure 1): e,Bsolar transmittance of the solar protection device; e,Bsolar reflectance of the side of the solar protection device facing the incident radiation; e,Bsola
40、r reflectance of the side of the solar protection device facing away from the incident radiation; BS EN 13363-1:2003+A1:2007Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 133
41、63-1:2003+A1:2007 (E) 6 v,Blight transmittance of the solar protection device; v,Blight reflectance of the side of the solar protection device facing the incident radiation; v,Blight reflectance of the side of the solar protection device facing away from the incident radiation. These values are dete
42、rmined by the most appropriate method for normal incidence. If no data are available, typical data for solar protection devices, indicated in Table A.2, may be used. !In the case of louvre or Venetian blinds the above properties shall be used when the blinds are closed. For blinds open to 45 the fol
43、lowing corrected values may be used assuming there is no direct solar penetration: )70,075,0(15,065,0Be,Be,corrBe,Be,Be,corrBe,+=+=The properties of louvre or Venetian blinds can also be calculated in accordance with Annex A of EN 13363-2:2005 1. The limitations given in the scope shall be considere
44、d.“ Key 1 Blinds 45 (a) transmittance, absorptance and reflectance of a solar protection device b) no direct penetration in the case of louvre or Venetian blinds open to 45 (c) principle of the correction of the transmittance in the case of blinds open to 45 Figure 1 Principles of solar transmittanc
45、e of solar protection devices 5 Total solar energy transmittance NOTE The formulae are based on a simple physical model and the values of the notional parameters G are mathematically fitted to a more precise reference calculation, following the principles of EN 13363-2, Solar protection devices comb
46、ined with glazing Calculation of solar and light transmittance Part 2: Reference method. The ventilation assumptions are such that the results are conservative for cooling load estimations. BS EN 13363-1:2003+A1:2007Copyright European Committee for Standardization Provided by IHS under license with
47、CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 13363-1:2003+A1:2007 (E) 7 5.1 External solar protection device Figure 2 shows schematically the installation of external solar protection devices. Key 1 Exterior 2 Solar protection device 3 Unventilated air spa
48、ce 4 Glazing 5 Interior Figure 2 Characteristic position of external solar protection device The total solar energy transmittance for glazing and an external solar protection device is given by: 1Be,2Be,Be,t)(GGgGGgg += 1 (1) ! where e,B = 1e,B e,BG1= 5 W/(m2K) G2= 10 W/(m2K) G = 121111+ )(gGGU“ 5.2 Internal solar protection device Figure 3 shows schematically the installation of internal solar protection devices. BS EN 13363-1:2003+A1:2007Copyright European Committee for Standardization Provided by IHS under license with CENNot for Resal
