1、BSI Standards PublicationBS EN 13170:2012Thermal insulation productsfor buildings Factory madeproducts of expanded cork(ICB) SpecificationBS EN 13170:2012+A1:2015BS EN 13170:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13170:2012+A1:2015. It supe
2、rsedes BS EN 13170:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation
3、 in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a co
4、ntract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86807 8ICS 79.100; 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published un
5、der the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13170:2012+A1 February 2015 ICS 91.100.60 Sup
6、ersedes EN 13170:2012English Version Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en lige expans (ICB) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkt
7、e aus expandiertem Kork (ICB) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European S
8、tandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Eng
9、lish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,
10、 Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerlan
11、d, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Mem
12、bers. Ref. No. EN 13170:2012+A1:2015 EEN 13170:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .8 4 Requirements 11 5 Test methods . 18 6 Designation code 21 7 Assessment and Verification of the Constancy of Pe
13、rformance (AVCP) . 22 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 27 Annex C (normative) Multi layered insulat
14、ion products (insulation cork board) 31 Annex D (normative) Determination of the thermal conductivity in relation to moisture content 33 Annex E (informative) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 35 Anne
15、x ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 38 Bibliography . 49 Tables Table 1 Classes for length tolerances 12 Table 2 Classes for width tolerances 12 Table 3 Classes for thickness tolerances . 13 Table 4 Levels for be
16、nding strength . 14 Table 5 Dimensional stability under specified temperature and humidity conditions 14 Table 6 Levels for compressive stress at 10 % deformation 15 Table 7 Levels for tensile strength perpendicular to faces 15 Table 8 Levels for compressibility 17 Table 9 Test methods, test specime
17、ns and conditions. 20 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 26 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 27 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 29 T
18、able E.1 test results . 35 Table E.2 R test results . 36 Table ZA.1 Relevant clauses for factory made expanded cork and intended use . 38 BS EN 13170:2012+A1:2015EN 13170:2012+A1:2015 (E)EN 13170:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, sym
19、bols, units and abbreviated terms .8 4 Requirements 11 5 Test methods . 18 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductiv
20、ity . 24 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 27 Annex C (normative) Multi layered insulation products (insulation cork board) 31 Annex D (normative) Determination of the thermal conductivity in relation to moisture content 33 Annex E (infor
21、mative) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 35 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 38 Bibliography . 49 Tables
22、 Table 1 Classes for length tolerances 12 Table 2 Classes for width tolerances 12 Table 3 Classes for thickness tolerances . 13 Table 4 Levels for bending strength . 14 Table 5 Dimensional stability under specified temperature and humidity conditions 14 Table 6 Levels for compressive stress at 10 %
23、deformation 15 Table 7 Levels for tensile strength perpendicular to faces 15 Table 8 Levels for compressibility 17 Table 9 Test methods, test specimens and conditions. 20 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 26 Table B.1 Minimum number of tes
24、ts for !PTD“ and minimum product testing frequencies . 27 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 29 Table E.1 test results . 35 Table E.2 R test results . 36 Table ZA.1 Relevant clauses for factory made expanded cork and intended use . 38 EN 13170:2012
25、+A1:2015 (E) 3 Table ZA.2 Systems of AVCP . 40 Table ZA.3.1 Assignment of AVCP tasks for factory made expanded cork products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 40 Table ZA.3.2 Assignment of AVCP tasks for factory made expanded cork products under system 3 (see Table
26、ZA.2). 42 Table ZA.3.3 Assignment of AVCP tasks for factory made expanded cork products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 43 Figures Figure D.1 Example of a graphic representation of “a” . 34 Figure ZA.1 Example CE marking information of products under AVCP s
27、ystem 1 and system 3“ . 48 BS EN 13170:2012+A1:2015EN 13170:2012+A1:2015 (E)EN 13170:2012+A1:2015 (E) 4 Foreword This document (EN 13170:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This Europea
28、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elemen
29、ts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13170:2012“. This document has been prepared under a mandate given to CEN by the European Commission and the European
30、Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document includes Amendment 1 approved by CEN on 2014-12-15. The start and fin
31、ish of text introduced or altered by amendment is indicated in the text by tags !“. Compared with EN 13170:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative ann
32、ex on multi-layered products; c) changes on some editorial and technical content and addition of information on some specific items such as for ICB; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products;
33、e) changes to Annex ZA. !Amendment 1 modifies EN 13170:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a ne
34、w subclause 4.3.13; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; BS EN 13170:2012+A1:2015EN 13170:2012+A1:2015 (E)EN 13170:2012+A1:2015 (E) 4 Foreword This document (EN 13170:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating
35、 materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest
36、by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13170:2012“. This document has been pre
37、pared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This
38、 document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Compared with EN 13170:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to E
39、N 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content and addition of information on some specific items such as for ICB; d) addition of links to EN 15715, Thermal insulation products Instructio
40、ns for mounting and fixing for reaction to fire testing Factory made products; e) changes to Annex ZA. !Amendment 1 modifies EN 13170:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amen
41、dment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.13; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; EN 13170:2012+A1:2015 (E) 5 l) a new Annex ZA.“ This standard is one of a series of standards for insulation produc
42、ts used in buildings, but may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a “package” of documents. The package of standards comprises the following group of interrelated standards for the spe
43、cifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (E
44、PS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation product
45、s for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal
46、insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products
47、Specification The reductions in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organizations
48、of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne
49、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13170:2012+A1:2015EN 13170:2012+A1:2015 (E)EN 13170:2012+A1:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made products of expanded cork, which are used for the thermal insulation of buildings. The products are made with granulated cork agglomerated without additional binders and
