1、Standard ECMA-1932nd Edition - June 1997Standardizing Information and Communication SystemsPhone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.chPrivate Integrated Services Network(PISN) -Specification, Functional Model andInformation Flows -Do Not Distu
2、rb and Do Not DisturbOverride Supplementary Services.Standard ECMA-1932nd Edition - June 1997Standardizing Information and Communication SystemsPhone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.chIW Ecma-193.doc 19-08-97 11,41Private Integrated Service
3、s Network(PISN) -Specification, Functional Model andInformation Flows -Do Not Disturb and Do Not DisturbOverride Supplementary Services(DND(O)SD).Brief HistoryThis Standard is one of a series of ECMA Standards defining services and signalling protocols applicable to Private IntegratedServices Networ
4、ks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework ofInternational Standards for Open Systems Interconnection as defined by ISO/IEC. It has been produced under ITSTC workitem M-IT-05 2.2 and under ETSI work item DE/ECMA-00013.This particular Standard specif
5、ies the Do Not Disturb (DND) and Do Not Disturb Override (DNDO) supplementary services.This Standard is based upon the practical experience of ECMA member companies and the results of their active andcontinuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and nation
6、al standardizationbodies. It represents a pragmatic and widely based consensus.There are currently no equivalent services specified by ITU-T or ETSI for public ISDNs.Compared to the 1st Edition of Standard ECMA-193 (published by ECMA in June 1993), this 2nd Edition incorporateschanges in order to ac
7、hieve complete alignment with International Standard ISO/IEC 14842:1996(E) published by ISO/IEC inSeptember 1996.Adopted as 2nd Edition of Standard ECMA-193 by the General Assembly of June 1997.- i -Table of contents1 Scope 12 Conformance 13 References (normative) 14 Definitions 24.1 External defini
8、tions 24.2 Other definitions 34.2.1 Additional network feature 34.2.2 Call, basic call 34.2.3 Consultation timer 34.2.4 Originating number 34.2.5 Originating subaddress 34.2.6 Path retention 34.2.7 Served user 35 Acronyms 36 SS-DND stage 1 specification 46.1 Description 46.1.1 General description 46
9、.1.2 Qualifications on applicability to telecommunication services 46.2 Procedures 46.2.1 Provision/withdrawal 46.2.2 Normal procedures 56.2.3 Exceptional procedures 76.3 Interactions with other supplementary services and ANFs 76.3.1 Calling Line Identification Presentation (SS-CLIP) 76.3.2 Connecte
10、d Line Identification Presentation (SS-COLP) 76.3.3 Calling/Connected Line Identification Restriction (SS-CLIR) 76.3.4 Calling Name Identification Presentation (SS-CNIP) 76.3.5 Connected Name Identification Presentation (SS-CONP) 76.3.6 Calling/Connected Name Identification Restriction (SS-CNIR) 76.
11、3.7 Completion of Calls to Busy Subscriber (SS-CCBS) 76.3.8 Completion of Calls on No Reply (SS-CCNR) 86.3.9 Call Transfer (SS-CT) 86.3.10 Call Forwarding Unconditional (SS-CFU) 86.3.11 Call Forwarding Busy (SS-CFB) 86.3.12 Call Forwarding No Reply (SS-CFNR) 86.3.13 Call Deflection (SS-CD) 86.3.14 P
12、ath Replacement (ANF-PR) 96.3.15 Do Not Disturb Override (SS-DNDO) 9- ii -6.3.16 Call Offer (SS-CO) 96.3.17 Call Intrusion (SS-CI) 96.4 Interworking considerations 96.5 Overall SDL 97 SS-DNDO stage 1 specification 127.1 Description 127.1.1 General description 127.1.2 Qualifications on applicability
13、to telecommunication services 127.2 Procedures 127.2.1 Provision/withdrawal 127.2.2 Normal procedures 127.2.3 Exceptional procedures 137.3 Interactions with other supplementary services and ANFs 137.3.1 Calling Line Identification Presentation (SS-CLIP) 137.3.2 Connected Line Identification Presenta
14、tion (SS-COLP) 137.3.3 Calling/Connected Line Identification Restriction (SS-CLIR) 137.3.4 Calling Name Identification Presentation (SS-CNIP) 137.3.5 Connected Name Identification Presentation (SS-CONP) 137.3.6 Calling/Connected Name Identification Restriction (SS-CNIR) 137.3.7 Completion of Calls t
15、o Busy Subscriber (SS-CCBS) 137.3.8 Completion of Calls on No Reply (SS-CCNR) 137.3.9 Call Transfer (SS-CT) 137.3.10 Call Forwarding Unconditional (SS-CFU) 147.3.11 Call Forwarding Busy (SS-CFB) 147.3.12 Call Forwarding No Reply (SS-CFNR) 147.3.13 Call Deflection (SS-CD) 147.3.14 Path Replacement (A
16、NF-PR) 147.3.15 Do Not Disturb (SS-DND) 147.3.16 Call Offer (SS-CO) 157.3.17 Call Intrusion (SS-CI) 157.4 Interworking considerations 157.5 Overall SDL 158 SS-DND stage 2 specification 198.1 Functional model 198.1.1 Functional model description 198.1.2 Description of functional entities 198.1.3 Rela
17、tionship of functional model to basic call functional model 208.2 Information flows 208.2.1 Definition of information flows 208.2.2 Relationship of information flows to basic call information flows 268.2.3 Examples of information flow sequences 27- iii -8.3 Functional entity actions 328.3.1 Function
18、al entity actions of FE1 328.3.2 Functional entity actions of FE2 328.3.3 Functional entity actions of FE3 328.3.4 Functional entity actions of FE4 328.3.5 Functional entity actions of FE5 328.3.6 Functional entity actions of FE6 338.4 Functional entity behaviour 338.4.1 Behaviour of FE1 338.4.2 Beh
19、aviour of FE2 348.4.3 Behaviour of FE3 358.4.4 Behaviour of FE4 388.4.5 Behaviour of FE5 398.4.6 Behaviour of FE6 408.5 Allocation of functional entities to physical equipment 418.6 Interworking considerations 419 SS-DNDO stage 2 specification 429.1 Functional model 429.1.1 Functional model descript
20、ion 429.1.2 Description of functional entities 429.1.3 Relationship of functional model to basic call functional model 439.2 Information flows 439.2.1 Definition of information flows 439.2.2 Relationship of information flows to basic call information flows 459.2.3 Examples of information flow sequen
21、ces 469.3 Functional entity actions 599.3.1 Functional entity actions of FE1 599.3.2 Functional entity actions of FE2 599.3.3 Functional entity actions of FE3 609.4 Functional entity behaviour 609.4.1 Behaviour of FE1 609.4.2 Behaviour of FE2 619.4.3 Behaviour of FE3 709.5 Allocation of functional e
22、ntities to physical equipment 739.6 Interworking considerations 73- iv -.1ScopeThis Standard specifies the Supplementary Services Do Not Disturb (SS-DND) and Do Not Disturb Override(SS-DNDO), which are applicable to various basic services supported by Private Integrated Services Networks (PISN).Basi
23、c services are specified in ECMA-142.SS-DND is a supplementary service which enables a served user to cause the PISN to reject any calls, or just thoseassociated with a specified basic service, addressed to the served users PISN number. The calling user is given anappropriate indication. Incoming ca
24、lls are rejected as long as the service is active. The served users outgoing service isunaffected.SS-DNDO is a supplementary service which enables a served user to override SS-DND at a called user; that is, toallow the call to proceed as if the called user had not activated SS-DND.SS-DND and SS-DNDO
25、 are described separately because SS-DND is a service used by a called user, and SS-DNDO isa service used by a calling user. This leads to describing two very related state machines.NOTE 1It is possible to implement SS-DND without implementing SS-DNDO.Supplementary service specifications are produce
26、d in three stages, according to the method described in ETS 300 387.This Standard contains the stage 1 and stage 2 specifications of SS-DND and SS-DNDO. The stage 1 specifications(clauses 6 and 7) specify the supplementary service as seen by users of PISNs. The stage 2 specification (clauses 8 and9)
27、 identify the functional entities involved in the supplementary service and the information flows between them.2 ConformanceIn order to conform to this Standard, a stage 3 standard shall specify signalling protocols and equipment behaviour thatare capable of being used in a PISN which supports the s
28、upplementary service specified in this Standard. This meansthat, to claim conformance, a stage 3 standard is required to be adequate for the support of those aspects of clauses 6 to9 which are relevant to the interface or equipment to which the stage 3 standard applies.The stage 1 and stage 2 clause
29、s which a stage 3 standard for the Do Not Disturb supplementary service is required tosupport are clauses 6 and 8.The stage 1 and stage 2 clauses which a stage 3 standard for the Do Not Disturb Override supplementary service isrequired to support are clauses 7 and 9.3 References (normative)The follo
30、wing standards contain provisions which, through reference in this text, constitute provisions of this Standard.All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate thepossibility of applying the most recent editions of the standards i
31、ndicated below.In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of theappropriate ISO/IEC International Standard is given in brackets after the ECMA reference.ECMA-142 Private Integrated Services Network - Circuit-mode 64 kbit/s Bearer Ser
32、vices - ServiceDescription, Functional Capabilities and Information Flows (International StandardISO/IEC 11574)ECMA-148 Private Integrated Services Network - Specification, Functional Model and Information Flows -Identification Supplementary Services (International Standard ISO/IEC 14136)ECMA-163 Pr
33、ivate Integrated Services Network - Specification, Functional Model and Information Flows -Name Identification Supplementary Services (International Standard ISO/IEC 13864)ISO/IEC 11571 Information technology - Telecommunications and information exchange between systems -Numbering and sub-addressing
34、 in private integrated services networksISO/IEC 11579-1 Information technology - Telecommunications and information exchange between systems -Private Integrated Services Network - Part 1: Reference configuration for PISN Exchanges(PINX)- 2 -ETS 300 387 Private Telecommunication Network (PTN); Method
35、 for the specification of basic andsupplementary services (1994)ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993)ITU-T Rec. I.210 Principles of telecommunication services supported by an ISDN and the means to describe them(1993)ITU-T Rec. Z.100 Specification and description language (1993)4 Defi
36、nitionsFor the purposes of this Standard, the following definitions apply.4.1 External definitionsThis Standard uses the following terms defined in other documents: Basic service (ITU-T Rec. I.210) Calling Party Name (ECMA-163) Connection (ITU-T Rec. I.112) Name (ECMA-163) Number (ISO/IEC 11571) Pri
37、vate Integrated Services Network (PISN) (ISO/IEC 11579-1) Private Integrated Services Network Exchange (PINX) (ISO/IEC 11579-1) Service (ITU-T Rec. I.112) Signalling (ITU-T Rec. I.112) Subaddress (ISO/IEC 11571) Supplementary Service (ITU-T Rec. I.210) User (ECMA-142)This Standard refers to the foll
38、owing basic call functional entity (FEs) defined in ECMA-142: Call Control (CC) Call Control Agent (CCA)This Standard refers to the following basic call inter-FE relationships defined in ECMA-142: r1 r2 r3This Standard refers to the following basic call information flows defined in ECMA-142: CHAN AC
39、K request/indication Disconnect request/indication Release request/indication Release response/confirmation Report request/indication Setup request/indication Setup response/confirmation.- 3 -This Standard refers to the following basic call information flow service elements defined in ECMA-142: Dest
40、ination Number Connection type.This Standard refers to the following information flow elements defined in ECMA-148: Originating number Originating subaddress.4.2 Other definitions4.2.1 Additional network featureA capability, over and above that of a basic service, provided by a PISN, but not directl
41、y to a PISN user.4.2.2 Call, basic callAn instance of the use of a basic service.4.2.3 Consultation timerA timer governing the time in which the calling user is allowed to request invocation of SS-DNDO after beinginformed that a call has failed because of SS-DND active at the destination. The durati
42、on of the timer is animplementation option.4.2.4 Originating numberThe number of the calling user.4.2.5 Originating subaddressThe subaddress of the calling user.4.2.6 Path retentionThe retention of the network connection between the Originating CC and the Destination CC so that asupplementary servic
43、e (such as SS-DNDO) can be invoked without establishing a new connection.4.2.7 Served userThe user for which SS-DND is activated or deactivated, or for which SS-DND is invoked.5 AcronymsANF Additional Network FeatureCC Call Control (functional entity)CCA Call Control Agent (functional entity)CCBS Ca
44、ll Completion to Busy SubscriberCCNR Call Completion on No ReplyCD Call DeflectionCFB Call Forwarding BusyCFNR Call Forwarding No ReplyCFU Call Forwarding UnconditionalCI Call IntrusionCLIP Calling Line Identification PresentationCLIR Calling/Connected Line Identification RestrictionCNIP Calling Nam
45、e Identification PresentationCNIR Calling/Connected Name Identification Restriction- 4 -CO Call OfferCOLP Connected Line Identification PresentationCONP Connected Name Identification PresentationCT Call TransferDND Do Not DisturbDNDO Do Not Disturb OverrideDNDOCL DNDO Capability LevelDNDPL DND Prote
46、ction LevelFE Functional EntityISDN Integrated Services Digital NetworkMSN Multiple Subscriber NumberPINX Private Integrated Services Network ExchangePISN Private Integrated Services NetworkPR Path ReplacementSDL Specification and Description LanguageSS Supplementary ServiceTE Terminal Equipment6 SS
47、-DND stage 1 specification6.1 Description6.1.1 General descriptionSS-DND is a supplementary service which enables a served user to cause the PISN to reject any calls, or justthose associated with a specified basic service, addressed to the served users PISN number. The calling user isgiven an approp
48、riate indication. Incoming calls are rejected as long as the service is active. The served usersoutgoing service is unaffected.The related supplementary service Do Not Disturb Override allows a calling user to override Do Not Disturb,subject to service profiles.The SS-DND service is provided on a PI
49、SN number.For a given PISN number, this service (including options) may be subscribed to for each basic service to whichthe user of the number subscribes, or collectively for all the basic services to which the user subscribes.6.1.2 Qualifications on applicability to telecommunication servicesSS-DND is applicable to all circuit mode basic services defined in ECMA-142.6.2 Procedures6.2.1 Provision/withdrawalSS-DND is provided or withdrawn after pre-arrangement with the service provider.SS-DND is provided on a per PISN number basis and per basic service bas
