1、Salient Characteristics: A-A-53401 65 7777774 0030555 I? A-A-53 401 1 April 1988 COMMERCIAL ITEM DESCRIPTION BANDAGE ELASTIC The General Services Administration has authorized the use of this Commercial Item Description in preference to Bandage, Cotton, Elastic of Military Specification MIL-B-37163
2、dated 4 June 1975. This Commercial Item Description covers- an elastic adhesive bandage capable of causing compression and suitable for binding where pressure is required. Type I: The bandage shall be a roll of elastic adhesive bandage suitable for securing large bulky wound dressings and for bindin
3、g where pressure is required. The 1 inch size is suitable as a fixation device for external catheters. Each bandage shall be one continuous piece and shall be evenly and neatly rolled with the adhesive mass to the inside, on a suitable rigid core of approximately 1-1/4 inch diameter. The bandage sha
4、ll be free of ravelings and loose threads. Each bandage shall be capable of being stretched in the warp direction without mechanical force, to a minimum length of 5 yards, and testing for stretch shall be determined by stretching manually. The bandage shall be a minimum of 3 yards unstretched. After
5、 the fabric backing has been stretched in the warp direction and then released, the fabric shall return to is a.pproximate original relaxed condition. The fabric backing shall be all virgin cotton, crimped weave, with leno or slit edges, and having a minimum thread count of 39 in the warp direction
6、and 32 in the fill direction. Both warp and fill yarns shall be combed or carded peeler cotton having a nominal staple length of 1-1/16 inch. The backing fabric shall have a minimum weight of 7 ounces per square yard and the color of the fabric shall be off-white (natural) or light tan. AMSC/NA FSC
7、6510 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. . THIS DOCUMENT CONTAINS 7 PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53401 AnA-S3Y05 65 H- 9399974 003055b Y For the abric backing, the thread cou
8、nt per inch and the weight per square yard shall be in the relaxed condition. The numbeg o threads per inch shall be in accordance with Federal Test Method Standard No. 191, method 5050 except the average of the results obtained from three places on each sample roll shall be the thread count for the
9、 sample roll. The adhesive on the fabric backing shall be prssure- sensitive, spread on one side of the fabric and shall be a smooth homogeneous blend of new natural and synthetic rubberr plasticizers, filler and resinc. The col.or of the adhesive mass shall be ivory or off-white. The adhesive coati
10、ng on the roll shall be uniformly applied, substantially Lee o breaks and ehcil not be toxic or irritating to the skin. The feather edgef; o the leno-edged material shall be free of adhesive. The manimuni weight of the adhesive mass shall be 145 gm/m2 and shall be determined in the following manner:
11、 Weigh a specimen o the Einished bandage to the nearest thousandth o a gmm. the sample with a suitable solvent. Dry, then reweigh sample. The difleience between the two weighings is the weight of adhesive mass of the sample. The adhesive quality (adhesion) shall be a minimum average o 1 Ib when test
12、ed in accordance with the Shear Adhesive Strength Test of Adhesive Tape U.S.P. test result shall be the average o the results obtained from not lem than 3 specimens from different sample rolls. Remove all of the adhesive mass rom Convert this weight to gm/m2. The adhesive quality TABLE I Width - Min
13、. Length Min. Length (Stretched) (uns t retched) SIZE 7 1 inch (.E/- 1/8 inch) 5 yards 3 yards 1 3 inch (+/- 1/8 inch) 5 yards 3 yards 2 4 inch (.E/- 1/8 inch) 5 yards 3 yards 3 6 inch (+/o 1/8 inch) 5 yards 3 yards 4 Type II: The bandage shall be a roll of elastic adhesive bandage suitable for secu
14、ring Sarge bulky wound dressings an for binding where pressure is required, 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53401 65 7779774 0030557 b A-A-53 4 O 1 Each bandage shall be one continuous piece and shall be evenly and neatly rolled
15、 with the adhesive mass to the inside, on a suitable rigid core of approximately 1 inch diameter. The bandage shall be free of ravelings and loose threads. Each bandage shall be capable of being stretched in the warp direction without mechanical force to a minimum length of 5 yards, and testing for
16、stretch shall be determined by stretching manually. The bandage shall be a minimum of 3 yards unstretched. After the fabric backing has been stretched in the warp direction and then released, the fabric shal.1. return to its approximate original relaxed condition. The fabric backing shall be a minim
17、um of 89 percent cotton and the remainder shall be spandex and polyester. The spandex shall be covered with polyester. The warp shall consist of a minimum of 24 cotton yarns per inch and a minimum of-12 polyester covered spandex strands per inch. The filling shall have a minimum of 28 cotton yarns p
18、er inch. The fabric shall have a hinimum weight of 7 ounces per square yard, and the color of the fabric shall be off-white (natural). For the fabric backing, the thread count per inch and the weight per square yard shall be in the relaxed condition. The number of threads per inch shall be in accord
19、ance with Federal Test method Standard No. 191, method 5050 except the average of the results obtained from three places on each sample roll shall be the thread count for the sample roll. The adhesive on the fabric backing shall be pressure- sensitive, spread on one size of the fabric and shall be a
20、 smooth homogeneous blend of new natural and synthetic rubber, plasticizer, fillers and resins. The color of the adhesive mass shall be ivory or off-white. The adhesive coating on the roll shall be uniformly and properly applied, substantially free of breaks and shall not be toxic or irritating to t
21、he skin. The minimum weight of the adhesive mass shall be 127 gm/m2 and shall be determined in the following manner: Weigh a specimen of the finished bandage to the nearest thousandth of a gram. Remove all of the adhesive mass from the sample with a suitable solvent. Dry, then reweigh sample. The di
22、fference between the two weighings is the weight of adhesive mass of the sample. Convert this weight to gm/m2. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53 4 O1 A-A-SJ40ll 65 9979974 0030558 8 The adhesive quality (adhesion) shall be a mi
23、nimum average of 20 ounces when tested in accordance with the Shear Adhesive Stxength zest of Adhesive Tape U.S.P. The adhesive quality test result shall be the average of the results obtained rom not less than 3 specimens rom different sample rolls. TABLE X3 Width v Min. Iierrgth Min. Lens (Stretch
24、ed) ( =%Ec 1-*.- hed 1 SIZE - 3 inch (W- 1/8 inch) 5 yards 3 yards 2 4 inch (+/- 1/& inch) 5 yards 3 yards 3 6 inch (+/- 1/8 inch) 5 yards 3 yards 4 Workmansha. detract from its appearance or impair its serviceability. The Bandage shall be Exe front defects which Unit. - Package (PG) For Size I, Sze
25、 2c and Size 3, one package containing 36 individually wrapped rolls o one size only, as specified, constitutes one unit. For Size 4, one package containing 12 individually wrapped rolls, as specifiedr constitutes one unit. QualitQ Assurance-Provisions . the esntlract OK purchase ordet-, the contrac
26、tor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase orderr the contractor niay use his own or any faciJjtie6 suitable for the performance o the inspection requirements specified hexeint unless disapprove
27、d by the Government. The Government reserves the right to perform any of the inspections rset forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribe requirements. ResponsibiliCyfor c*=TzuIu. inspection. -IC- Unless otherwise specif
28、ied in Rcord% Recorde of examinations and tests performed by or for th contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, o& fmm time to time, during the performance of the contract: and or a period OP three years after de
29、livery of the supplies to which such records relate. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53q01 65 997977Li 0030559 T m A-A-534 O 1 Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory in
30、vestigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Testing and examination shall be conducted to determine compliance with all specification requirements. Test methods shall be su
31、itable, accurate and reproducible. Sampling for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. The unit of product for examination shall be one bandage. Unless otherwise specified, sampling for examination shall be conducted at inspec
32、tion level II, AQL 2.5 maximum percent defective. Contractor certification. - The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Govern
33、ment reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using in
34、ch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances
35、specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
36、IHS-,-,-A-A-53401 65 m 9999974 00305b0 b- 1 Preservation, packaging ,jacking , labeling, u_ -*u and Dark ins. be to a degree of protection to preclude damage to containers and/or contentG thereof uner normal shipping conditions, handling, etc:, involving shipment rom the supply source to receiving a
37、ctivity, plus reshipment from receiving activity, and shall conform to appl.icable carriers rules and regulations. Intermediate and exterior package quantities an labeling and marking shall be as specified in the contract and/or order. NOTE: The following Mational Stack Numbers are covered by this d
38、ocument: Unless f othezwttre specified, preservation, packagingr and packing shall A-A-53 4 O1 I Regulatory nquirements. Federal Food, Drus_gayL_C_qgngtic Act. If the product covered by fhas been determined by the U.S. Food and Drug Aaminlstration to be under ite jurisdiction, the oferor/contractoi
39、shall comply, and be responsible for compliance by it6 subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosnietic Act, as aniendeci, arid regulations promulgated thereunder. In additionr the ofexou/contractor shall comply, and be responsible for compliance by its subcont
40、ractors/suppliers, with the requirements of ail other applicable Federal, State, and local statutes, ordinances, and regulations. materials. The offerorVcontractor is encouraged to UBB recovered material in aceordance with Public Law 94-580, as amensii, and as implemented by Federal Acquisition Regu
41、lation Subpart 23.4 to the maximum extent practical. TYPE - SIZE ” ITEM IDENTIFICATION - 6510-01-235-0361 BANRAGE, ELASTIC 2 I 3 inch by 5 yards, 36s 6510-01-235-0362 BANDAGE, ELASTIC 1 I 6510-01-100-5562 BANDAGE, ELASTIC 2 1 & 11 1 inch by 5 yards, 36s 3 inch by 5 yards, 36s 6510-01-101-1950 BANDAG
42、E, ELASTIC 3 I & II 4 inch by 5 yards, 36s 6510-01-096-5293 BANDAGE, ELASTIC 4 r ti II 6 inch by 5 yards, 12s 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-8 MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD - MB Army - MD Navy - MS Air For
43、ce - 03 Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAS PGC 05111 Project No. 6510-0725 A-A-53401 65 74 00305bl A-A-5 3 4 O 1 Ordering data. Inspection/test dating required, intermediate/exterior package quantities and labeling and marking must be specified i.n the contract and/or order. 7 *USs. GOVERNMENT FRINTING OFFICE: WS8 - 5osM3I9uM Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
