欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    DLA MS51825 REV H (1)-2008 SLEEVES CLINCHES TUBE FITTING FLARELESS TYPE HYDRAULIC [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514].pdf

    • 资源ID:697601       资源大小:61.33KB        全文页数:8页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    DLA MS51825 REV H (1)-2008 SLEEVES CLINCHES TUBE FITTING FLARELESS TYPE HYDRAULIC [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514].pdf

    1、INCH-POUND MS51825H w/AMENDMENT 1 5 June 2008 SUPERSEDING MS51825H 24 March 2008 DETAIL SPECIFICATION SHEET SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC Inactive for new design after 17 August 1999. For new design, use SAE-J514. This specification is approved for use by all Departments

    2、 and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-F-18866. Inches mm .005 .010 0.13 0.25STYLE - A FIGURE 1. Sleeves, clinch, tube fitting. AMSC N/A FSC 4730 Provided by IHSNot for ResaleNo reprodu

    3、ction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 2Dash number style A Tube O.D. A dia. Inches (mm) +.003 (0.08) -.000 C dia. Inches (mm) +.005 (0.13) -.000 D dia. Inches (mm) +.000 -.003 (0.08) E dia. Inches (mm) +.003 (0.08) -.000 F Inches (mm) .003 (0.08) -1 1/8 .1

    4、30 (3.30) .237 (6.02) .178 (4.52) .140 (3.56) .288 (7.32) -2 3/16 .193 (4.90) .307 (7.80) .249 (6.32) .205 (5.21) .329 (8.36) -3 1/4 .255 (6.48) .367 (9.32) .312 (7.92) .268 (6.81) .363 (9.22) -4 5/16 .318 (8.08) .430 (10.92) .375 (9.53) .330 (8.38) .367 (9.32) -5 3/8 .380 (9.65) .492 (12.50) .440 (

    5、11.18) .393 (9.98) .393 (9.98) -6 1/2 .505 (12.83) .663 (16.84) .587 (14.91) .521 (13.23) .429 (10.90) -7 5/8 .631 (16.03) .780 (19.81) .713 (18.11) .647 (16.43) .442 (11.23) -8 3/4 .756 (19.20) .925 (23.50) .838 (21.29) .772 (19.61) .475 (12.07) -9 7/8 .881 (22.38) 1.040 (26.42) .963 (24.46) .897 (

    6、22.78) .475 (12.07) -10 1 1.006 (25.55) 1.187 (30.15) 1.088 (27.64) 1.022 (25.96) .475 (12.07) -11 1-1/4 1.260 (32.00) 1.446 (36.73) 1.341 (34.06) 1.275 (32.39) .475 (12.07) -12 1-1/2 1.510 (38.35) 1.694 (43.03) 1.590 (40.39) 1.524 (38.71) .475 (12.07) -13 2 2.014 (51.16) 2.210 (56.13) 2.094 (53.19)

    7、 2.026 (51.46) .509 (12.93) Dash number style A G Inches (mm) +.000 -.006 (0.15) H Inches (mm) +.016 (0.41) -.000 J Max Inches (mm) K ref Inches (mm) L Inches (mm) .000 -.005 (0.13) M Inches (mm) +.003 (0.08) -.002 (0.05) -1 .046 (1.17) .078 (1.98) .130 (3.30) .027 (0.69) .152 (3.86) .020 (0.51) -2

    8、.047 (1.19) .078 (1.98) .130 (3.30) .027 (0.69) .218 (5.54) .020 (0.51) -3 .049 (1.24) .109 (2.77) .161 (4.09) .027 (0.69) .285 (7.24) .025 (0.64) -4 .049 (1.24) .125 (3.18) .171 (4.34) .027 (0.69) .352 (8.94) .025 (0.64) -5 .049 (1.24) .125 (3.18) .156 (3.96) .029 (0.74) .418 (10.62) .025 (0.64) -6

    9、 .068 (1.73) .162 (4.11) .260 (6.60) .044 (1.12) .555 (14.10) .030 (0.76) -7 .064 (1.63) .181 (4.60) .247 (6.27) .042 (1.07) .681 (17.30) .030 (0.76) -8 .076 (1.93) .181 (4.60) .270 (6.86) .050 (1.27) .807 (20.50) .030 (0.76) -9 .083 (2.11) .181 (4.60) .275 (6.99) .052 (1.32) .931 (23.65) .030 (0.76

    10、) -10 .083 (2.11) .187 (4.75) .265 (6.73) .054 (1.37) 1.056 (26.82) .030 (0.76) -11 .083 (2.11) .187 (4.75) .245 (6.22) .062 (1.57) 1.309 (33.25) .030 (0.76) -12 .086 (2.18) .187 (4.75) .245 (6.22) .062 (1.57) 1.559 (39.60) .030 (0.76) -13 .092 (2.34) .187 (4.75) .258 (6.55) .070 (1.78) 2.059 (52.30

    11、) .030 (0.76) Dash number style A N Inches (mm) -1 .171 (4.34) -2 .242 (6.15) -3 .303 (7.70) -4 .366 (9.30) -5 .431 (10.95) -6 .577 (14.66) -7 .703 (17.86) -8 .828 (21.03) -9 .953 (24.21) -10 1.078 (27.38) -11 1.331 (33.81) -12 1.580 (40.13) -13 2.084 (52.93) FIGURE 1. Sleeves, clinch, tube fitting

    12、- Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 3Inches mm .007 .015 .020 .030 0.18 0.38 0.51 0.76 STYLE - B B dia. Dash number style B A dia. .005 (0.13) Inches (mm) Min Inches (mm) Max Inches (mm) C dia. +.003 (0

    13、.08) -.000 Inches (mm) D .003 (0.08) Inches (mm) -1 .203 (5.16) .175 (4.45) .178 (4.52) .129 (3.28) .278 (7.06) -2 .312 (7.92) .252 (6.40) .256 (6.50) .193 (4.90) .278 (7.06) -3 .359 (9.12) .309 (7.85) .313 (7.95) .255 (6.48) .336 (8.53) -4 .422 (10.72) .373 (9.47) .377 (9.58) .318 (8.08) .336 (8.53

    14、) -5 .484 (12.29) .431 (10.95) .435 (11.05) .380 (9.65) .375 (9.53) -6 .625 (15.88) .585 (14.86) .589 (14.96) .506 (12.85) .375 (9.53) -7 .750 (19.05) .698 (17.73) .702 (17.83) .633 (16.08) .415 (10.54) -8 .875 (22.23) .836 (21.23) .840 (21.34) .758 (19.25) .415 (10.54) -9 1.000 (25.40) .961 (24.41)

    15、 .965 (24.51) .883 (22.43) .415 (10.54) -10 1.125 (28.58) 1.086 (27.58) 1.090 (27.69) 1.008 (25.60) .415 (10.54) -11 1.406 (35.71) 1.339 (34.01) 1.343 (34.11) 1.260 (32.00) .415 (10.54) -12 1.656 (42.06) 1.589 (40.36) 1.593 (40.46) 1.511 (38.38) .415 (10.54) -13 2.188 (55.58) 2.092 (53.14) 2.096 (53

    16、.24) 2.014 (51.16) .450 (11.43) FIGURE 1. Sleeves, clinch, tube fitting - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 4Dash number style B E Max Inches (mm) F radius Inches (mm) G radius Inches (mm) H radius max

    17、Inches (mm) J dia. Min Inches (mm) -1 .281 (7.14) .010 (0.25) .007 (0.18) .006 (0.15) .154 (3.91) -2 .281 (7.14) .020 (0.51) .007 (0.18) .006 (0.15) .227 (5.77) -3 .339 (8.61) .020 (0.51) .007 (0.18) .006 (0.15) .286 (7.26) -4 .378 (9.60) .020 (0.51) .007 (0.18) .006 (0.15) .350 (8.89) -5 .418 (10.6

    18、2) .020 (0.51) .007 (0.18) .006 (0.15) .408 (10.36) -6 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .556 (14.12) -7 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .669 (16.99) -8 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .807 (20.50) -9 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .

    19、932 (23.67) -10 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) 1.057 (26.85) -11 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) 1.310 (33.27) -12 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) 1.560 (39.62) -13 .456 (11.58) .020 (0.51) .010 (0.25) .010 (0.25) 2.063 (52.40) K Inches (mm) L Diam

    20、eter Inches (mm) Dash number style B Min Max Min Max -1 .015 (0.38) .023 (0.58) .148 (3.76) .156 (3.96) -2 .020 (0.51) .028 (0.71) .221 (5.61) .229 (5.82) -3 .024 (0.61) .032 (0.81) .280 (7.11) .288 (7.32) -4 .024 (0.61) .032 (0.81) .344 (8.74) .352 (8.94) -5 .024 (0.61) .032 (0.81) .402 (10.21) .41

    21、0 (10.41) -6 .024 (0.61) .032 (0.81) .550 (13.97) .558 (14.17) -7 .024 (0.61) .032 (0.81) .663 (16.84) .671 (17.04) -8 .024 (0.61) .032 (0.81) .801 (20.35) .809 (20.55) -9 .024 (0.61) .032 (0.81) .926 (23.52) .934 (23.72) -10 .024 (0.61) .032 (0.81) 1.051 (26.70) 1.059 (26.90) -11 .024 (0.61) .032 (

    22、0.81) 1.304 (33.12) 1.312 (33.32) -12 .024 (0.61) .032 (0.81) 1.554 (39.47) 1.562 (39.67) -13 .024 (0.61) .032 (0.81) 2.057 (52.25) 2.065 (52.45) NOTES: 1. Dimensions are in inches, unless otherwise specified. 2. Metric equivalents are given for information only. 3. This illustration is for identifi

    23、cation and is not intended to restrict designs or shapes not dimensioned. FIGURE 1. Sleeves, clinch, tube fitting - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. Material: Materials shall be in accordance with MIL-F-18866. Provided by IHSNot for ResaleNo reproduction or networ

    24、king permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 5Finish: All platings shown in table I shall be capable of meeting the 96 hour salt spray test in accordance with ASTM B117. TABLE I. Material and finish designators. Designator Material Finish Blank Steel Cadmium plating in accordan

    25、ce with SAE-AMS-C-81562, type II, class 3 or SAE-AMS-QQ-P-416, type II, class 2. N Steel NAVAIR trivalent chromium pretreatment (TCP) in accordance with MIL-DTL-81706, type II, class 1a. J Steel Zinc plating with chromate conversion in accordance with ASTM B633; type II or III, Fe/Zn 5, or ASTM B695

    26、, type II, class 5. H Steel Zinc phosphate in accordance with MIL-DTL-16232, type Z, class 1 and shall be hexavalent chromium free. P Steel Zinc plating with colorless passivate in accordance with ASTM B633, type VI, Fe/Zn 5. S Corrosion resistant steel 1/ No additional finish. Passivation in accord

    27、ance with SAE-AMS2700, type 6 or 7. 1/ V Steel Zinc nickel in accordance with SAE-AMS2417, type 1. 1/ Stainless steel of such hardness as to be capable of biting, fully annealed type 304 stainless steel tubing. Part or Identifying Number (PIN) example: MS51825 - 1 S B MS number Dash number (see figu

    28、re 1) Material and finish designator, see table I Style (A or B), see figure 1 Guidance on use of alternative parts with less hazardous or nonhazardous materials. This specification provides for a number of alternative plating materials via the PIN. Users should select the PIN with the least hazardo

    29、us material that meets the form, fit and function requirements of their application. For old designs that use clinch sleeves in accordance with MS51825, tables II and III show supersession data to clinch sleeves in accordance with SAE-J514. Users are cautioned to evaluate replacements for their part

    30、icular application. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 6TABLE II. Supersession data for MS51825 style - A. Inactive PIN Active SAE Inactive PIN Active SAE Hydraulic PIN 1/ Hydraulic PIN 2/ MS51825-1A J514-2-080115A

    31、Q MS51825-1PA J514-2-080115AP MS51825-2A J514-3-080115AQ MS51825-2 PA J514-3-080115AP MS51825-3A J514-4-080115AQ MS51825-3 PA J514-4-080115AP MS51825-4A J514-5-080115AQ MS51825-4 PA J514-5-080115AP MS51825-5A J514-6-080115AQ MS51825-5 PA J514-6-080115AP MS51825-6A J514-8-080115AQ MS51825-6 PA J514-8

    32、-080115AP MS51825-7A J514-10-080115AQ MS51825-7 PA J514-10-080115AP MS51825-8A J514-12-080115AQ MS51825-8 PA J514-12-080115AP MS51825-9A J514-14-080115AQ MS51825-9 PA J514-14-080115AP MS51825-10A J514-16-080115AQ MS51825-10 PA J514-16-080115AP MS51825-11A J514-20-080115AQ MS51825-11 PA J514-20-08011

    33、5AP MS51825-12A J514-24-080115AQ MS51825-12 PA J514-24-080115AP MS51825-13A J514-32-080115AQ MS51825-13 PA J514-32-080115AP Inactive PIN Active SAE Inactive PIN Active SAE Hydraulic PIN 3/ Hydraulic PIN 4/ MS51825-1 (JA or RA) J514-2-080115AZ MS51825-1SA J514-2-080115AS MS51825-2 (JA or RA) J514-3-0

    34、80115AZ MS51825-2SA J514-3-080115AS MS51825-3 (JA or RA) J514-4-080115AZ MS51825-3SA J514-4-080115AS MS51825-4 (JA or RA) J514-5-080115AZ MS51825-4SA J514-5-080115AS MS51825-5 (JA or RA) J514-6-080115AZ MS51825-5SA J514-6-080115AS MS51825-6 (JA or RA) J514-8-080115AZ MS51825-6SA J514-8-080115AS MS51

    35、825-7 (JA or RA) J514-10-080115AZ MS51825-7SA J514-10-080115AS MS51825-8 (JA or RA) J514-12-080115AZ MS51825-8SA J514-12-080115AS MS51825-9 (JA or RA) J514-14-080115AZ MS51825-9SA J514-14-080115AS MS51825-10 (JA or RA) J514-16-080115AZ MS51825-10SA J514-16-080115AS MS51825-11 (JA or RA) J514-20-0801

    36、15AZ MS51825-11SA J514-20-080115AS MS51825-12 (JA or RA) J514-24-080115AZ MS51825-12SA J514-24-080115AS MS51825-13 (JA or RA) J514-32-080115AZ MS51825-13SA J514-32-080115AS 1/ Designator “C” is for steel, “Q” is for cadmium plating. 2/ Designator “C” is for steel, “P” is for zinc phosphate plating.

    37、3/ Designator “C” is for steel, “Z” is for zinc plating. 4/ Designator “S” is for corrosion resistant steel. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 7TABLE III. Supersession data for MS51825 style - B. Inactive PIN Acti

    38、ve SAE Inactive PIN Active SAE Hydraulic PIN 1/ Hydraulic Active PIN 2/ MS51825-1B J514-2-080115BQ MS51825-1PB J514-2-080115BP MS51825-2B J514-3-080115BQ MS51825-2PB J514-3-080115BP MS51825-3B J514-4-080115BQ MS51825-3PB J514-4-080115BP MS51825-4B J514-5-080115BQ MS51825-4PB J514-5-080115BP MS51825-

    39、5B J514-6-080115BQ MS51825-5PB J514-6-080115BP MS51825-6B J514-8-080115BQ MS51825-6PB J514-8-080115BP MS51825-7B J514-10-080115BQ MS51825-7PB J514-10-080115BP MS51825-8B J514-12-080115BQ MS51825-8PB J514-12-080115BP MS51825-9B J514-14-080115BQ MS51825-9PB J514-14-080115BP MS51825-10B J514-16-080115B

    40、Q MS51825-10PB J514-16-080115BP MS51825-11B J514-20-080115BQ MS51825-11PB J514-20-080115BP MS51825-12B J514-24-080115BQ MS51825-12PB J514-24-080115BP MS51825-13B J514-32-080115BQ MS51825-13PB J514-32-080115BP Inactive PIN Active SAE Inactive PIN Active SAE Hydraulic PIN 3/ Hydraulic PIN 4/ MS51825-1

    41、(JB or RB) J514-2-080115B (J or R) MS51825-1SB J514-2-080115BS MS51825-2(JB or RB) J514-3-080115B (J or R) MS51825-2SB J514-3-080115BS MS51825-3(JB or RB) J514-4-080115B (J or R) MS51825-3SB J514-4-080115BS MS51825-4(JB or RB) J514-5-080115B (J or R) MS51825-4SB J514-5-080115BS MS51825-5(JB or RB) J

    42、514-6-080115B (J or R) MS51825-5SB J514-6-080115BS MS51825-6(JB or RB) J514-8-080115B (J or R) MS51825-6SB J514-8-080115BS MS51825-7(JB or RB) J514-10-080115B (J or R) MS51825-7SB J514-10-080115BS MS51825-8(JB or RB) J514-12-080115B (J or R) MS51825-8SB J514-12-080115BS MS51825-9(JB or RB) J514-14-0

    43、80115B (J or R) MS51825-9SB J514-14-080115BS MS51825-10(JB or RB) J514-16-080115B (J or R) MS51825-10SB J514-16-080115BS MS51825-11(JB or RB) J514-20-080115B (J or R) MS51825-11SB J514-20-080115BS MS51825-12(JB or RB) J514-24-080115B (J or R) MS51825-12SB J514-24-080115BS MS51825-13(JB or RB) J514-3

    44、2-080115B (J or R) MS51825-13SB J514-32-080115BS 1/ Designator “C” is for steel, “Q” is for cadmium plating. 2/ Designator “C” is for steel, “P” is for zinc phosphate plating. 3/ Designator “C” is for steel, “Z” is for zinc plating. 4/ Designator “S” is for corrosion resistant steel. Amendment notat

    45、ions. The margins of this specification are marked with vertical lines to indicate where modifications from this amendment were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned

    46、to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 8Referenced documents. In addition to MIL-F-18866, this document

    47、references the following: MIL-DTL-16232 MIL-DTL-81706 ASTM B117 ASTM B633 ASTM B695 SAE-AMS-C-81562 SAE-AMS-QQ-P-416 SAE-AMS2417 SAE-AMS2700 SAE-J514 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AR DLA - CC Navy - SH Air Force - 99 (Project 4730-2008-087) DLA - CC Review activities: Ar

    48、my - AT, AV, GL, MI Navy - AS, MC, SA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-


    注意事项

    本文(DLA MS51825 REV H (1)-2008 SLEEVES CLINCHES TUBE FITTING FLARELESS TYPE HYDRAULIC [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514].pdf)为本站会员(fuellot230)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开