欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    DLA MIL-DTL-85 1 G-2009 WAVEGUIDES RIGID RECTANGULAR.pdf

    • 资源ID:691261       资源大小:50.42KB        全文页数:9页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    DLA MIL-DTL-85 1 G-2009 WAVEGUIDES RIGID RECTANGULAR.pdf

    1、AMSC N/A FSC 5985 MIL-DTL-85/1G 26 March 2009 SUPERSEDING MIL-DTL-85/1F 20 November 1998 DETAIL SPECIFICATION SHEET WAVEGUIDES, RIGID, RECTANGULAR This specification is approved for use by all Depart- ments and Agencies of the Department of Defense. The requirements for acquiring the waveguides desc

    2、ribed herein shall consist of this document and the latest issue of MIL-DTL-85. FIGURE 1. Waveguides, rigid, rectangular. REQUIREMENTS: Design, construction, and physical dimensions: See figure 1 and table I. Material: See table I. Part or Identifying Number (PIN): See table I. AN nomenclature: See

    3、table II. NOTES: Cross index and engineering information: See table II. Cross index of NATO approved types: See table III. Resistivity of materials: See table IV. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-85/1G 2 TABLE I. Wav

    4、eguides, rigid, rectangular. 4/ Dimensions (inches) PIN Inside Outside Wall M85/1- 1/ Width (A) Height (B) Toler- ance Width (C) Height (D) Toler- ance Thick- ness (Nominal) Max allow eccent 2/ Max inner corner radius 3/ ASTM type material 001-XXX 002-XXX 161-XXX 23.000 (584.20) 11.500 (292.10) .020

    5、 (0.51) 23.376 (593.75) 11.876 (301.65) .020 (0.51) .188 (4.78) .010 (0.25) .125 (3.18) 1100 6061 6063 003-XXX 004-XXX 162-XXX 21.000 (533.40) 10.500 (266.70) .020 (0.51) 21.376 (542.95) 10.876 (276.25) .020 (0.51) .188 (4.78) .010 (0.25) .125 (3.18) 1100 6061 6063 005-XXX 006-XXX 163-XXX 18.000 (45

    6、7.20) 9.000 (228.60) .020 (0.51) 18.250 (463.55) 9.250 (234.95) .020 (0.51) .125 (3.18) .010 (0.25) .125 (3.18) 1100 6061 6063 007-XXX 008-XXX 164-XXX 15.000 (381.00) 7.500 (190.50) .015 (0.38) 15.250 (387.35) 7.750 (196.85) .015 (0.38) .125 (3.18) .010 (0.25) .0937 (2.38) 1100 6061 6063 009-XXX 010

    7、-XXX 165-XXX 11.500 (292.10) 5.750 (146.05) .015 (0.38) 11.750 (298.45) 6.000 (152.40) .015 (0.38) .125 (3.18) .010 (0.25) .0937 (2.38) 1100 6061 6063 011-XXX 012-XXX 166-XXX 9.750 (247.65) 4.875 (123.83) .010 (0.25) 10.000 (254.00) 5.125 (130.18) .010 (0.25) .125 (3.18) .010 (0.25) .0625 (1.59) 110

    8、0 6061 6063 013-XXX 014-XXX 167-XXX 7.700 (195.58) 3.850 (97.79) .010 (0.25) 7.950 (201.93) 4.100 (104.14) .010 (0.25) .125 (3.18) .010 (0.25) .0625 (1.59) 1100 6061 6063 015-XXX 017-XXX 018-XXX 019-XXX 020-XXX 168-XXX 6.500 (165.10) 3.250 (82.55) .008 (0.20) 6.660 (169.16) 3.410 (86.61) .008 (0.20)

    9、 .080 (2.03) .008 (0.20) .0468 (1.19) OF-DLP Copper alloy 1100 6061 AZ31B 6063 021-XXX 023-XXX 024-XXX 025-XXX 026-XXX 169-XXX 5.100 (129.54) 2.550 (64.77) .008 (0.20) 5.260 (133.60) 2.710 (68.83) .008 (0.20) .080 (2.03) .008 (0.20) .0468 (1.19) OF-DLP Copper alloy AZ31B 1100 6061 6063 027-XXX 029-X

    10、XX 030-XXX 031-XXX 032-XXX 170-XXX 4.300 (109.22) 2.150 (54.61) .008 (0.20) 4.460 (113.28) 2.310 (58.67) .008 (0.20) .080 (2.03) .008 (0.20) .0468 (1.19) OF-DLP 1100 6061 Copper alloy AZ31B 6063 033-XXX 035-XXX 036-XXX 037-XXX 038-XXX 171-XXX 3.400 (86.36) 1.700 (43.18) .006 (0.15) 3.560 (90.42) 1.8

    11、60 (47.24) .006 (0.15) .080 (2.03) .007 (0.18) .0468 (1.19) OF-DLP 1100 6061 Copper alloy AZ31B 6063 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-85/1G 3 TABLE I. Waveguides, rigid, rectangular - Continued. 4

    12、/ Dimensions (inches) PIN Inside Outside Wall M85/1- 1/ Width (A) Height (B) Toler- ance Width (C) Height (D) Toler- ance Thick- ness (Nominal) Max allow eccent. 2/ Max inner corner radius 3/ ASTM type material 039-XXX 041-XXX 042-XXX 043-XXX 044-XXX 172-XXX 2.840 (72.14) 1.340 (34.04) .006 (0.15) 3

    13、.000 (76.20) 1.500 (38.10) .006 (0.15) .080 (2.03) .006 (0.15) .0468 (1.19) OF-DLP 1100 6061 Copper alloy AZ31B 6063 045-XXX 047-XXX 048-XXX 049-XXX 050-XXX 173-XXX 2.290 (58.17) 1.145 (29.08) .006 (0.15) 2.418 (61.42) 1.273 (32.33) .006 (0.15) .064 (1.63) .005 (0.13) .0468 (1.19) OF-DLP 1100 6061 C

    14、opper alloy AZ31B 6063 051-XXX 053-XXX 054-XXX 055-XXX 056-XXX 174-XXX 1.872 (47.55) .872 (22.15) .005 (0.13) 2.000 (50.80) 1.000 (25.40) .005 (0.13) .064 (1.63) .004 (0.10) .0312 (0.79) OF-DLP 1100 6061 Copper alloy AZ31B 6063 057-XXX 059-XXX 060-XXX 061-XXX 062-XXX 175-XXX 1.590 (40.39) .795 (20.1

    15、9) .005 (0.13) 1.718 (43.64) .923 (23.44) .005 (0.13) .064 (1.63) .004 (0.10) .0312 (0.79) OF-DLP 1100 6061 Copper alloy AZ31B 6063 063-XXX 065-XXX 066-XXX 067-XXX 068-XXX 176-XXX 1.372 (34.85) .622 (15.80) .004 (0.10) 1.500 (38.10) .750 (19.05) .004 (0.10) .064 (1.63) .004 (0.10) .0312 (0.79) OF-DL

    16、P 1100 6061 Copper alloy AZ31B 6063 069-XXX 071-XXX 072-XXX 073-XXX 074-XXX 177-XXX 1.122 (28.50) .497 (12.62) .004 (0.10) 1.250 (31.75) .625 (15.88) .004 (0.10) .064 (1.63) .004 (0.10) .0312 (0.79) OF-DLP 1100 6061 Copper alloy AZ31B 6063 075-XXX 077-XXX 078-XXX 079-XXX 080-XXX 178-XXX .900 (22.86)

    17、 .400 (10.16) .004 (0.10) 1.000 (25.40) .500 (12.70) .004 (0.10) .050 (1.27) .004 (0.10) .0312 (0.79) OF-DLP 1100 6061 Copper alloy AZ31B 6063 081-XXX 083-XXX 084-XXX 085-XXX 086-XXX 179-XXX .750 (19.05) .375 (9.53) .003 (0.08) .850 (21.59) .475 (12.07) .003 (0.08) .050 (1.27) .004 (0.10) .0312 (0.7

    18、9) OF-DLP 1100 6061 Copper alloy AZ31B 6063 See footnotes at end of table.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-85/1G 4 TABLE I. Waveguides, rigid, rectangular - Continued. 4/ Dimensions (inches) PIN Inside Outside Wall M85/1- 1/ Wi

    19、dth (A) Height (B) Toler- ance Width (C) Height (D) Toler- ance Thick- ness (Nominal) Max allow eccent 2/ Max inner corner radius 3/ ASTM type material 087-XXX 089-XXX 090-XXX 091-XXX 092-XXX 093-XXX 180-XXX .622 (15.80) .311 (7.90) .0025 (0.06) .702 (17.83) .391 (9.93) .003 (0.08) .040 (1.02) .003

    20、(0.08) .0156 (0.40) OF-DLP Copper alloy 1100 6061 AZ31B Coin silver 6063 094-XXX 096-XXX 097-XXX 098-XXX 099-XXX 181-XXX .510 (12.95) .255 (6.48) .0025 (0.06) .590 (14.99) .335 (8.51) .003 (0.08) .040 (1.02) .003 (0.08) .0156 (0.40) OF-DLP Copper alloy 1100 6061 AZ31B 6063 100-XXX 102-XXX 103-XXX 10

    21、4-XXX 105-XXX 106-XXX 182-XXX .420 (10.67) .170 (4.32) .002 (0.05) .500 (12.70) .250 (6.35) .003 (0.08) .040 (1.02) .003 (0.08) .0156 (0.40) OF-DLP Copper alloy 1100 6061 AZ31B Coin silver 6063 107-XXX 109-XXX 110-XXX 111-XXX 112-XXX 113-XXX 183-XXX .340 (8.64) .170 (4.32) .002 (0.05) .420 (10.67) .

    22、250 (6.35) .003 (0.08) .040 (1.02) .003 (0.08) .0156 (0.40) OF-DLP Copper alloy 1100 6061 AZ31B Copper alloy 5/ 6063 155-XXX 156-XXX 157-XXX 158-XXX 159-XXX 160-XXX 1.020 (25.91) .510 (12.95) .003 (0.08) 1.148 (29.16) .638 (16.21) .005 (0.13) .064 (1.63) - .016 (0.41) Copper alloy OF-DLP 1100 6061 A

    23、Z31B 6063 1/ The complete PIN shall be the number shown and a three-digit number indicating length in inches (i.e., M85/1-001-096). 2/ The eccentricity of a waveguide is defined as one-half the difference between opposite wall thickness as measured at any cross section perpendicular to the longitudi

    24、nal axis. 3/ Maximum outer corner radius, .031 inch (0.79 mm); minimum outer corner radius, .016 inch (0.41 mm). 4/ Metric equivalents (to the nearest .01 mm) are given for general information only, and are based upon 1 inch = 25.4 mm. Millimeters are in parentheses. 5/ Material shall be Fine silver

    25、 laminated on copper alloy, minimum thickness .005 inch (0.13 mm). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-85/1G 5 TABLE II. Cross index and engineering information. PIN M85/1- Old type designation (AN nomenclature) Suggested frequenc

    26、y range TE10mode Cutoff for TE10modeTheoretical 1/ attenuation (lowest to highest frequency) Theoretical peak power rating 2/ (lowest to highest frequency) Theoretical CW power rating 3/ (lowest to highest frequency) 001-XXX 002-XXX 161-XXX 003-XXX 004-XXX 162-XXX 005-XXX 006-XXX 163-XXX 007-XXX 008

    27、-XXX 164-XXX 009-XXX 010-XXX 165-XXX 011-XXX 012-XXX 166-XXX 013-XXX 014-XXX 167-XXX 015-XXX 017-XXX 018-XXX 019-XXX 020-XXX 168-XXX 021-XXX 023-XXX 024-XXX 025-XXX 026-XXX 169-XXX 027-XXX 029-XXX 030-XXX 031-XXX 032-XXX 170-XXX 033-XXX 035-XXX 036-XXX 037-XXX 038-XXX 171-XXX 039-XXX 041-XXX 042-XXX

    28、 043-XXX 044-XXX 172-XXX RG-290/U - - RG-291/U - - RG-201/U - - RG-202/U - - RG-203/U - - RG-204/U - - RG-205/U - - - RG-69/U RG-103/U - RG-206/U - - RG-337/U RG-339/U RG-338/U - - - RG-105/U - RG-104/U RG-207/U - - RG-113/U - RG112/U RG-208/U - - RG-75/U - RG-48/U RG-167/U - GHz .32 - .49 .32 - .49

    29、 .32 - .49 .35 - .53 .35 - .53 .35 - .53 .410 - .625 .410 - .625 .410 - .625 .490 - .750 .490 - .750 .490 - .750 .64 - .96 .64 - .96 .64 - .96 .75 - 1.12 .75 - 1.12 .75 - 1.12 .96 - 1.45 .96 - 1.45 .96 - 1.45 1.12 - 1.70 1.12 - 1.70 1.12 - 1.70 1.12 - 1.70 1.12 - 1.70 1.12 - 1.70 1.45 - 2.20 1.45 -

    30、2.20 1.45 - 2.20 1.45 - 2.20 1.45 - 2.20 1.45 - 2.20 1.70 - 2.60 1.70 - 2.60 1.70 - 2.60 1.70 - 2.60 1.70 - 2.60 1.70 - 2.60 2.20 - 3.30 2.20 - 3.30 2.20 - 3.30 2.20 - 3.30 2.20 - 3.30 2.20 - 3.30 2.60 - 3.95 2.60 - 3.95 2.60 - 3.95 2.60 - 3.95 2.60 - 3.95 2.60 - 3.95 GHz .256 .256 .256 .281 .281 .2

    31、81 .328 .328 .328 .393 .393 .393 .513 .513 .513 .605 .605 .605 .766 .766 .766 .908 .908 .908 .908 .908 .908 1.154 1.154 1.154 1.154 1.154 1.154 1.375 1.375 1.375 1.375 1.375 1.375 1.737 1.737 1.737 1.737 1.737 1.737 2.080 2.080 2.080 2.080 2.080 2.080 dB/100 ft 0.040 - 0.026 0.047 - 0.031 0.043 - 0.

    32、028 0.046 - 0.031 0.054 - 0.036 0.050 - 0.034 0.057 - 0.038 0.067 - 0.045 0.062 - 0.041 0.076 - 0.051 0.089 - 0.060 0.082 - 0.055 0.113 - 0.076 0.133 - 0.089 0.122 - 0.082 0.147 - 0.098 0.173 - 0.115 0.159 - 0.106 0.205 - 0.139 0.240 - 0.163 0.222 - 0.151 0.213 - 0.141 0.316 - 0.209 0.273 - 0.180 0.

    33、320 - 0.212 0.484 - 0.320 0.295 - 0.195 0.296 - 0.201 0.440 - 0.299 0.674 - 0.458 0.380 - 0.258 0.446 - 0.303 0.411 - 0.279 0.393 - 0.261 0.502 - 0.334 0.590 - 0.392 0.583 - 0.387 0.892 - 0.592 0.544 - 0.361 0.533 - 0.371 0.682 - 0.474 0.801 - 0.557 0.791 - 0.550 1.211 - 0.842 0.739 - 0.514 0.742 -

    34、0.508 0.950 - 0.651 1.116 - 0.764 1.102 - 0.754 1.687 - 1.155 1.029 - 0.704 megawatts 528.3 - 753.8 528.3 - 753.8 528.3 - 753.8 439.3 - 625.4 439.3 - 625.4 439.3 - 625.4 325.1 - 461.4 325.1 - 461.4 325.1 - 461.4 224.1 - 320.4 224.1 - 320.4 224.1 - 320.4 132.0 - 186.9 132.0 - 186.9 132.0 - 186.9 93.8

    35、1 - 133.7 93.81 - 133.7 93.81 - 133.7 59.67 - 84.18 59.67 - 84.18 59.67 - 84.18 41.34 - 59.74 41.34 - 59.74 41.34 - 59.74 41.34 - 59.74 41.34 - 59.74 41.34 - 59.74 26.19 - 37.00 26.19 - 37.00 26.19 - 37.00 26.19 - 37.00 26.19 - 37.00 26.19 - 37.00 18.23 - 26.26 18.23 - 26.26 18.23 - 26.26 18.23 - 26

    36、.26 18.23 - 26.26 18.23 - 26.26 11.87 - 16.44 11.87 - 16.44 11.87 - 16.44 11.87 - 16.44 11.87 - 16.44 11.87 - 16.44 7.645 - 10.85 7.645 - 10.85 7.645 - 10.85 7.645 - 10.85 7.645 - 10.85 7.645 - 10.85 kilowatts 1702 - 2618 1447 - 2194 1582 - 2429 1375 - 2040 1170 - 1756 1264 - 1859 973.0 - 1450 827.2

    37、 - 123.2 893.9 - 135.2 630.1 - 939.0 537.7 - 797.6 583.6 - 870.1 342.8 - 509.7 291.0 - 434.9 317.3 - 472.1 231.2 - 346.9 196.4 - 295.4 213.6 - 320.5 137.8 - 203.3 117.6 - 173.2 127.9 - 187.0 114.8 - 173.6 80.53 - 121.8 88.45 - 135.7 76.26 - 115.1 50.35 - 76.15 82.72 - 125.1 68.22 - 100.4 47.87 - 70.

    38、44 29.92 - 44.04 53.19 - 78.34 45.29 - 66.67 49.14 - 72.39 45.14 - 68.00 35.30 - 53.05 30.03 - 45.20 31.67 - 47.71 19.82 - 29.87 32.57 - 49.08 27.82 - 40.00 21.73 - 31.26 18.50 - 26.60 19.52 - 28.07 12.21 - 17.56 20.05 - 28.83 17.19 - 25.11 13.42 - 19.59 11.42 - 16.69 12.06 - 17.62 7.542 - 11.02 12.

    39、39 - 18.12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-85/1G 6 TABLE II. Cross index and engineering information - Continued. PIN M85/1- Old type designation (AN nomenclature) Suggested frequency range TE10mode Cutoff for TE10modeTheoreti

    40、cal 1/ attenuation (lowest to highest frequency) Theoretical peak power rating 2/ (lowest to highest frequency) Theoretical CW power rating 3/ (lowest to highest frequency) 045-XXX 047-XXX 048-XXX 049-XXX 050-XXX 173-XXX 051-XXX 053-XXX 054-XXX 055-XXX 056-XXX 174-XXX 057-XXX 059-XXX 060-XXX 061-XXX

    41、 062-XXX 175-XXX 063-XXX 065-XXX 066-XXX 067-XXX 068-XXX 176-XXX 069-XXX 071-XXX 072-XXX 073-XXX 074-XXX 177-XXX 075-XXX 077-XXX 078-XXX 079-XXX 080-XXX 178-XXX 081-XXX 083-XXX 084-XXX 085-XXX 086-XXX 179-XXX 087-XXX 089-XXX 090-XXX 091-XXX 092-XXX 093-XXX 180-XXX - RG-341/U - RG-340/U RG-342/U - -

    42、RG-95/U - RG-49/U RG-168/U - - RG-344/U - RG-343/U RG-345/U - - RG-106/U - RG-50/U RG-169/U - - RG-68/U - RG-51/U RG-170/U - - RG-67/U - RG-52/U RG-171/U - - RG-347/U - RG-346/U RG-348/U - - RG-91/U RG-349/U - RG-172/U RG-107/U - GHz 3.30 - 4.90 3.30 - 4.90 3.30 - 4.90 3.30 - 4.90 3.30 - 4.90 3.30 -

    43、 4.90 3.95 - 5.85 3.95 - 5.85 3.95 - 5.85 3.95 - 5.85 3.95 - 5.85 3.95 - 5.85 4.90 - 7.05 4.90 - 7.05 4.90 - 7.05 4.90 - 7.05 4.90 - 7.05 4.90 - 7.05 5.85 - 8.20 5.85 - 8.20 5.85 - 8.20 5.85 - 8.20 5.85 - 8.20 5.85 - 8.20 7.05 - 10.00 7.05 - 10.00 7.05 - 10.00 7.05 - 10.00 7.05 - 10.00 7.05 - 10.00

    44、8.20 - 12.40 8.20 - 12.40 8.20 - 12.40 8.20 - 12.40 8.20 - 12.40 8.20 - 12.40 10.00 - 15.00 10.00 - 15.00 10.00 - 15.00 10.00 - 15.00 10.00 - 15.00 10.00 - 15.00 12.40 - 18.00 12.40 - 18.00 12.40 - 18.00 12.40 - 18.00 12.40 - 18.00 12.40 - 18.00 12.40 - 18.00 GHz 2.577 2.577 2.577 2.577 2.577 2.577

    45、3.155 3.155 3.155 3.155 3.155 3.155 3.705 3.705 3.705 3.705 3.705 3.705 4.285 4.285 4.285 4.285 4.285 4.285 5.260 5.260 5.260 5.260 5.260 5.260 6.560 6.560 6.560 6.560 6.560 6.560 7.847 7.847 7.847 7.847 7.847 7.847 9.490 9.490 9.490 9.490 9.490 9.490 9.490 dB/100 ft 0.946 - 0.671 1.211 - 0.858 1.42

    46、2 - 1.009 1.404 - 0.996 2.149 - 1.523 1.311 - 0.930 1.395 - 0.967 1.785 - 1.238 2.097 - 1.454 2.071 - 1.436 3.168 - 2.197 1.934 - 1.341 1.553 - 1.160 1.988 - 1.485 2.334 - 1.744 2.305 - 1.722 3.527 - 2.634 2.152 - 1.608 1.978 - 1.562 3.532 - 1.999 4.148 - 2.348 2.936 - 2.319 4.492 - 3.548 3.824 - 2.

    47、164 2.776 - 2.154 3.548 - 2.756 4.166 - 3.238 4.114 - 3.197 6.275 - 4.891 3.841 - 2.985 4.328 - 2.995 5.540 - 3.833 6.506 - 4.502 6.424 - 4.445 9.830 - 6.801 5.998 - 4.150 5.121 - 3.577 6.554 - 4.578 7.698 - 5.377 7.601 - 5.309 11.631- 8.124 7.097 - 4.957 6.451 - 4.743 9.578 - 7.041 8.259 - 6.071 9.700 - 7.131 14.655 - 10.773 6.910 - 5.079 8.943 - 6.574 megawatts 7.645 - 10.85 5.475 - 7.549 5.475 - 7.549 5.475 - 7.549 5.475 - 7.


    注意事项

    本文(DLA MIL-DTL-85 1 G-2009 WAVEGUIDES RIGID RECTANGULAR.pdf)为本站会员(terrorscript155)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开