欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    DLA MIL-DTL-83454 A-2011 TERMINALS STUD BLIND PLATE FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) [Superseded DLA MIL-T-83454 2D VALID NOTICE 3 DLA MIL-T-83454 2D NOTICE 2 DL.pdf

    • 资源ID:691111       资源大小:223.28KB        全文页数:19页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    DLA MIL-DTL-83454 A-2011 TERMINALS STUD BLIND PLATE FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) [Superseded DLA MIL-T-83454 2D VALID NOTICE 3 DLA MIL-T-83454 2D NOTICE 2 DL.pdf

    1、Comments, suggestions, or questions on this document should be addressed to Defense Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616, or e-mailed to STDZNMGTdla.mil. Since contact information can change, you may want to verify the currency of this address informat

    2、ion using the ASSIST database at https:/assist.daps.dla.mil/. AMSC N/A FSC 5940 INCH-POUND MIL-DTL-83454A 10 March 2011 SUPERSEDING MIL-T-83454 30 April 1975 DETAIL SPECIFICATION TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) Reactivated after 10 March 2011 and may

    3、 be used for new and existing designs and acquisitions. This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers noninsulated blind plate stud terminals used for bonding and grounding of electrical and electron

    4、ic systems in aircraft applications. 1.2 Classification. 1.2.1.1 Stud materials. The stud material and finish will be identified by the following designations, indicating that the stud material conforms to the requirements as described in 3.2.2 (see 1.3). A - 4140 chrome-molybdenum steel B - 8740 ch

    5、rome-nickel-molybdenum steel C - 4340 chrome-nickel-molybdenum steel 1.2.1.2 Grip. The nominal thickness (grip) of the material to which the stud is to be attached will be indicated by a single digit representing the material thickness in sixteenths (1/16ths) of an inch (see tables I through IV). 1.

    6、2.1.3 Stud thread length. The stud thread length will be indicated by two digits representing the length in sixteenths (1/16ths) of an inch (see tables I through IV). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83454A 2 Min 0.2188 (5.558)

    7、 0.2188 (5.558) 0.2188 (5.558) 0.2188 (5.558) 0.2188 (5.558) 0.2188 (5.558) Installation hole diameter Max 0.2228 (5.659) 0.2228 (5.659) 0.2228 (5.659) 0.2228 (5.659) 0.2228 (5.659) 0.2228 (5.659) S 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) R (max) 0.010 (.25) 0.0

    8、10 (.25) 0.010 (.25) 0.010 (.25) 0.010 (.25) 0.010 (.25) K 0.032 (.81) 0.375 (9.52) 0.438 (11.13) 0.500 (12.7) 0.375 (9.52) 0.438 (11.13) 0.500(12.7) J (max) 0.270 (6.86) 0.270 (6.86) 0.270 (6.86) 0.270 (6.86) 0.270 (6.86) 0.270 (6.86) H (max) 0.110 (2.79) 0.110 (2.79) 0.110 (2.79) 0.110 (2.79) 0.11

    9、0 (2.79) 0.110 (2.79) G40.032 (.81) 0.062 (1.57) 0.062 (1.57) 0.062 (1.57) 0.125 (3.18) 0.125 (3.18) 0.125 (3.18) F (max) 0.185 (4.70) 0.185 (4.70) 0.185 (4.70) 0.185 (4.70) 0.185 (4.70) 0.185 (4.70) E (max) 0.218 (5.54) 0.218 (5.54) 0.218 (5.54) 0.218 (5.54) 0.218 (5.54) 0.218 (5.54) D 0.001 (.03)

    10、0.217 (5.51) 0.217 (5.51) 0.217 (5.51) 0.217 (5.51) 0.217 (5.51) 0.217 (5.51) C (ref) 0.050 (1.27) 0.050 (1.27) 0.050 (1.27) 0.070 (1.78) 0.070 (1.78) 0.070 (1.78) B 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) A (ref) 0.312 (7.92) 0.312 (7.92) 0.312 (7.92) 0.312 (7.

    11、92) 0.312 (7.92) 0.312 (7.92) Stud thread size .138-32 UNJC-3A.138-32 UNJC-3A .138-32 UNJC-3A .138-32 UNJC-3A .138-32 UNJC-3A .138-32 UNJC-3A TABLE I. M83454/2 stud terminals - dimensions and configuration. Dash no. AA106 AA107 AA108 AA206 AA207 AA208 1 Dimensions are in inches. 2 Metric equivalents

    12、 in parentheses are given for general information only, based upon 1.00 inch = 25.4 millimeters (mm). 3 Unless otherwise specified, tolerance is 0.016 (.41mm). 4 Terminals with 0.062 (1.57 mm) grip, stud color: Gold. Terminals with 0.125 (3.18 m) grip, stud color: Olive drab. 5 This specification de

    13、picts only general design characteristics and is not intended to limit specific manufacturing processes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83454A 3 Min 0.2500 (6.350) 0.2500 (6.350) 0.2500 (6.350) 0.2500 (6.350) 0.2500 (6.350) 0

    14、.2500 (6.350) Installation hole diameter Max 0.2540 (6.452) 0.2540 (6.452) 0.2540 (6.452) 0.2540 (6.452) 0.2540 (6.452) 0.2540 (6.452) S 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) 0.114 (2.90) R (max) 0.010 (.25) 0.010 (.25) 0.010 (.25) 0.010 (.25) 0.010 (.25) 0.010 (.25) K 0.0

    15、32 (.81) 0.375 (9.52) 0.438 (11.13) 0.500 (12.7) 0.375 (9.52) 0.438 (11.13) 0.500(12.7) J (max) 0.320 (8.13) 0.320 (8.13) 0.320 (8.13) 0.320 (8.13) 0.320 (8.13) 0.320 (8.13) H (max) 0.120 (3.05) 0.120 (3.05) 0.120 (3.05) 0.120 (3.05) 0.120 (3.05) 0.120 (3.05) G40.032 (.81) 0.062 (1.57) 0.062 (1.57)

    16、0.062 (1.57) 0.125 (3.18) 0.125 (3.18) 0.125 (3.18) F (max) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) E (max) 0.249 (6.32) 0.249 (6.32) 0.249 (6.32) 0.249 (6.32) 0.249 (6.32) 0.249 (6.32) D 0.001 (.03) 0.248 (6.30) 0.248 (6.30) 0.248 (6.30) 0.248 (6.30) 0.248 (6.3

    17、0) 0.248 (6.30) C (ref) 0.065 (1.65) 0.065 (1.65) 0.065 (1.65) 0.085 (2.16) 0.085 (2.16) 0.085 (2.16) B 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) 0.090 (2.29) A (ref) 0.375 (9.52) 0.375 (9.52) 0.375 (9.52) 0.375 (9.52) 0.375 (9.52) 0.375 (9.52) Stud thread size .164-32 UNJC-3A

    18、.164-32 UNJC-3A.164-32 UNJC-3A.164-32 UNJC-3A.164-32 UNJC-3A.164-32 UNJC-3ATABLE II. M83454/3 stud terminals - dimensions and configuration. Dash no. AA106 AA107 AA108 AA206 AA207 AA208 1 Dimensions are in inches. 2 Metric equivalents in parentheses are given for general information only, based upon

    19、 1.00 inch = 25.4 millimeters (mm). 3 Unless otherwise specified, tolerance is 0.016 (.41mm). 4 Terminals with 0.062 (1.57 mm) grip, stud color: Gold. Terminals with 0.125 (3.18 m) grip, stud color: Olive drab. 5 This specification depicts only general design characteristics and is not intended to l

    20、imit specific manufacturing processes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83454A 4 Min 0.3125 (7.938) 0.3125 (7.938) 0.3125 (7.938) 0.3125 (7.938) 0.3125 (7.938) 0.3125 (7.938) 0.3125 (7.938) 0.3125 (7.938) Installation hole diam

    21、eter Max 0.3165 (8.039) 0.3165 (8.039) 0.3165 (8.039) 0.3165 (8.039) 0.3165 (8.039) 0.3165 (8.039) 0.3165 (8.039) 0.3165 (8.039) S 0.134 (3.40) 0.134 (3.40) 0.134 (3.40) 0.134 (3.40) 0.134 (3.40) 0.134 (3.40) 0.134 (3.40) 0.134 (3.40) R (max) 0.010 (.25) 0.010 (.25) 0.010 (.25) 0.010 (.25) 0.010 (.2

    22、5) 0.010 (.25) 0.010 (.25) 0.010 (.25) K 0.032 (.81) 0.500 (12.70) 0.563 (14.30) 0.625 (15.88) 0.688 (17.48) 0.500 (12.70) 0.563 (14.30) 0.625 (15.88) 0.688 (17.48) J (max) 0.390 (9.91) 0.390 (9.91) 0.390 (9.91) 0.390 (9.91) 0.390 (9.91) 0.390 (9.91) 0.390 (9.91) 0.390 (9.91) H (max) 0.150 (3.81) 0.

    23、150 (3.81) 0.150 (3.81) 0.150 (3.81) 0.150 (3.81) 0.150 (3.81) 0.150 (3.81) 0.150 (3.81) G40.032 (.81) 0.062 (1.57) 0.062 (1.57) 0.062 (1.57) 0.062 (1.57) 0.125 (3.18) 0.125 (3.18) 0.125 (3.18) 0.125 (3.18) F (max) 0.238 (6.05) 0.238 (6.05) 0.238 (6.05) 0.238 (6.05) 0.238 (6.05) 0.238 (6.05) 0.238 (

    24、6.05) 0.238 (6.05) E (max) 0.311 (7.90) 0.311 (7.90) 0.311 (7.90) 0.311 (7.90) 0.311 (7.90) 0.311 (7.90) 0.311 (7.90) 0.311 (7.90) D 0.001 (.03) 0.309 (7.85) 0.309 (7.85) 0.309 (7.85) 0.309 (7.85) 0.309 (7.85) 0.309 (7.85) 0.309 (7.85) 0.309 (7.85) C (ref) 0.065 (1.65) 0.065 (1.65) 0.065 (1.65) 0.06

    25、5 (1.65) 0.085 (2.16) 0.085 (2.16) 0.085 (2.16) 0.085 (2.16) B 0.138 (3.51) 0.138 (3.51) 0.138 (3.51) 0.138 (3.51) 0.138 (3.51) 0.138 (3.51) 0.138 (3.51) 0.138 (3.51) A (ref) 0.428 (10.87) 0.428 (10.87) 0.428 (10.87) 0.428 (10.87) 0.428 (10.87) 0.428 (10.87) 0.428 (10.87) 0.428 (10.87) Stud thread s

    26、ize .190-32 UNJF-3A.190-32 UNJF-3A.190-32 UNJF-3A.190-32 UNJF-3A.190-32 UNJF-3A.190-32 UNJF-3A.190-32 UNJF-3A.190-32 UNJF-3ATABLE III. M83454/4 stud terminals - dimensions and configuration. Dash no. AA108 AA109 AA110 AA111 AA208 AA209 AA210 AA2111 Dimensions are in inches. 2 Metric equivalents in p

    27、arentheses are given for general information only, based upon 1.00 inch = 25.4 millimeters (mm). 3 Unless otherwise specified, tolerance is 0.016 (.41mm). 4 Terminals with 0.062 (1.57 mm) grip, stud color: Gold. Terminals with 0.125 (3.18 m) grip, stud color: Olive drab. 5 This specification depicts

    28、 only general design characteristics and is not intended to limit specific manufacturing processes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83454A 5 Min 0.3750 (9.525) 0.3750 (9.525) 0.3750 (9.525) 0.3750 (9.525) 0.3750 (9.525) 0.3750

    29、 (9.525) 0.3750 (9.525) 0.3750 (9.525) 0.3750 (9.525) 0.3750 (9.525) Installation hole diameter Max 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) 0.3790 (9.627) S 0.183 (4.65) 0.183 (4.65) 0.183 (4.65) 0.183 (4.

    30、65) 0.183 (4.65) 0.183 (4.65) 0.183 (4.65) 0.183 (4.65) 0.183 (4.65) 0.183 (4.65) R (max) 0.016 (.41) 0.016 (.41) 0.016 (.41) 0.016 (.41) 0.016 (.41) 0.016 (.41) 0.016 (.41) 0.016 (.41) 0.016 (.41) 0.016 (.41) K 0.032 (.81) 0.500 (12.70) 0.563 (14.30) 0.625 (15.88) 0.688 (17.48) 0.750 (19.05) 0.500

    31、(12.70) 0.563 (14.30) 0.625 (15.88) 0.688 (17.48) 0.750 (19.05) J (max) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) 0.475 (12.06) H (max) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.

    32、200 (5.08) 0.200 (5.08) 0.200 (5.08) 0.200 (5.08) G40.032 (.81) 0.062 (1.57) 0.062 (1.57) 0.062 (1.57) 0.062 (1.57) 0.062 (1.57) 0.125 (3.18) 0.125 (3.18) 0.125 (3.18) 0.125 (3.18) 0.125 (3.18) F (max) 0.350 (8.89) 0.350 (8.89) 0.350 (8.89) 0.350 (8.89) 0.350 (8.89) 0.350 (8.89) 0.350 (8.89) 0.350 (

    33、8.89) 0.350 (8.89) 0.350 (8.89) E (max) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) 0.374 (9.50) D 0.001 (.03) 0.373 (9.47) 0.373 (9.47) 0.373 (9.47) 0.373 (9.47) 0.373 (9.47) 0.373 (9.47) 0.373 (9.47) 0.373 (9.47) 0.373 (9.47)

    34、 0.373 (9.47) C (ref) 0.085 (2.16) 0.085 (2.16) 0.085 (2.16) 0.085 (2.16) 0.085 (2.16) 0.105 (2.67) 0.105 (2.67) 0.105 (2.67) 0.105 (2.67) 0.105 (2.67) B 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) 0.140 (3.56) A (ref) 0.500 (1

    35、2.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) Stud thread size .250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3A.250-28 UNJF-3ATABLE IV. M

    36、83454/5 stud terminals - dimensions and configuration. Dash no. AA108 AA109 AA110 AA111 AA112 AA208 AA209 AA210 AA211 AA2121 Dimensions are in inches. 2 Metric equivalents in parentheses are given for general information only, based upon 1.00 inch = 25.4 millimeters (mm). 3 Unless otherwise specifie

    37、d, tolerance is 0.016 (.41mm). 4 Terminals with 0.062 (1.57 mm) grip, stud color: Gold. Terminals with 0.125 (3.18 m) grip, stud color: Olive drab. 5 This specification depicts only general design characteristics and is not intended to limit specific manufacturing processes. Provided by IHSNot for R

    38、esaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83454A 6 1.3 Part or identification number (PIN). The PIN to be used for stud terminals acquired to this specification is created as follows (see 6.2 and tables I through IV): M 83454/X - B A X XX Example PIN: M83454/4

    39、-BA208 Stud thread length, in 16ths of an inch (see 1.2.1.3) Grip, in 16ths of an inch (see 1.2.1.2) Sleeve material placeholder (see 3.2.1) Stud material (see 1.2.1.1) A - 4140 chrome-molybdenum steel B - 8740 chrome-nickel-molybdenum steel C - 4340 chrome-nickel-molybdenum steel Specification numb

    40、er and slash number (se tables I through IV) Denotes military specification 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or reco

    41、mmended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are listed. 2

    42、.2 Government documents. 2.2.1 Specification, standards, and handbook. The following specification, standards, and handbook form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. FEDERAL

    43、STANDARD FED-STD-H28/4 - Screw-Thread Standards for Federal Services, Section 4, Controlled Radius Root Screw Threads, UNJ Symbol DEPARTMENT OF DEFENSE SPECIFICATION MIL-DTL-5541 - Chemical Conversion Coatings on Aluminum and Aluminum Alloys Provided by IHSNot for ResaleNo reproduction or networking

    44、 permitted without license from IHS-,-,-MIL-DTL-83454A 7 DEPARTMENT OF DEFENSE STANDARD MIL-STD-202 - Test Method Standard Electronic and Electrical Component Parts DEPARTMENT OF DEFENSE HANDBOOK MIL-HDBK-454 - General Guidelines for Electronic Equipment (Copies of these documents are available onli

    45、ne at https:/assist.daps.dla.mil/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.3 Non-government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issu

    46、es of these documents are those cited in the solicitation or contract. AEROSPACE INDUSTRIES ASSOCIATION NAS1149 - Washer, Flat NASM35338 - Washer, Lock-Spring, Helical, Regular (Medium) Series (Copies of these documents are available online at www.aia-aerospace.org/ or from the Aerospace Industries

    47、Association, 1000 Wilson Boulevard, Suite 1700, Arlington, VA 22209-3928.) AMERICAN SOCIETY FOR QUALITY ASQ Z1.4 - Sampling Procedures and Tables for Inspection by Attributes (Copies of this document are available online at http:/www.asq.org/ or from American Society for Quality, 600 North Plankinto

    48、n Avenue, Milwaukee, WI 53203.) SAE INTERNATIONAL SAE AMS-QQ-A-225/8 - Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished SAE AMS-QQ-A-250/4 - Aluminum Alloy 2024, Plate and Sheet SAE AMS-QQ-P-416 - Plating, Cadmium (Electrodeposited) SAE AMS 6322 - Steel Bars,

    49、Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) SAE AMS 6349 - Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83454A 8 SAE INTERNATIONAL - Continued SAE AMS 6484 - Steel, Bars, Forgings, and Tubing 0.80Cr - 1.


    注意事项

    本文(DLA MIL-DTL-83454 A-2011 TERMINALS STUD BLIND PLATE FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) [Superseded DLA MIL-T-83454 2D VALID NOTICE 3 DLA MIL-T-83454 2D NOTICE 2 DL.pdf)为本站会员(花仙子)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开