1、 AMSC N/A FSC 6145 INCH-POUND MIL-DTL-49055/1E 20 April 2011SUPERSEDING MIL-DTL-49055/1D 4 August 2000 DETAIL SPECIFICATION SHEET CABLES, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), (WIRE SIZE 26, 7/34 OR 28, 7/36 STRANDING) Inactive for new design after 16 June 1997. This specifica
2、tion is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-49055. FIGURE 1. Round conductor flat cable. NOTES: 1. Dimensions are in inches. 2. Metric equivale
3、nts are given for general information only. 3. All non-dimensional pictorial representations are for reference only. 4. Cable marking shall be placed along reference edge of cable. .025.007 TYP .050.003 TYP A B D .007 MIN REFERENCE EDGE OF CABLE (SEE NOTE 4) TEAR GROOVE TYP N (NO. OF CONDUCTORS) OPT
4、IONAL CONFIGURATION C SEE OPTIONAL CONFIGURATION Inches mm .003 .08 .007 .18 .025 .64 .050 1.27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-49055/1E 2 TABLE I. Dash numbers and characteristics. Dash number Number of con-ductors “N” Cable
5、width “A” inches Weight (lb/1,000 ft) AWG Dia. “C” inches .003 Dia. “D” inch Stranding End conductor to end conductor “B” inches Nom. 1/ Max. 01 9 0.450 0.010 10.3 11.7 28 0.035 0.015 7/36 0.400 0.010 02 10 0.500 0.010 11.4 13.0 28 0.035 0.015 7/36 0.450 0.010 03 14 0.700 0.010 16.0 18.2 28 0.035 0.
6、015 7/36 0.650 0.010 04 15 0.750 0.010 17.1 19.5 28 0.035 0.015 7/36 0.700 0.010 05 16 0.800 0.015 18.3 20.9 28 0.035 0.015 7/36 0.750 0.011 06 20 1.000 0.015 22.9 26.1 28 0.035 0.015 7/36 0.950 0.011 07 24 1.200 0.015 27.4 31.2 28 0.035 0.015 7/36 1.150 0.011 08 25 1.250 0.015 28.5 32.5 28 0.035 0.
7、015 7/36 1.200 0.011 09 26 1.300 0.015 29.7 33.9 28 0.035 0.015 7/36 1.250 0.011 10 34 1.700 0.020 38.9 44.3 28 0.035 0.015 7/36 1.650 0.015 11 37 1.850 0.020 42.2 48.1 28 0.035 0.015 7/36 1.800 0.015 12 40 2.000 0.020 45.7 52.1 28 0.035 0.015 7/36 1.950 0.015 13 50 2.500 0.020 57.2 65.2 28 0.035 0.
8、015 7/36 2.450 0.015 14 60 3.000 0.020 68.6 78.2 28 0.035 0.015 7/36 2.950 0.015 15 64 3.200 0.020 73.2 83.4 28 0.035 0.015 7/36 3.150 0.015 16 9 0.450 0.010 14.4 16.4 26 0.039 0.019 7/34 0.400 0.010 17 10 0.500 0.010 16.0 18.2 26 0.039 0.019 7/34 0.450 0.010 18 14 0.700 0.010 22.4 25.5 26 0.039 0.0
9、19 7/34 0.650 0.010 19 15 0.750 0.010 24.0 27.3 26 0.039 0.019 7/34 0.700 0.010 20 16 0.800 0.015 25.6 29.2 26 0.039 0.019 7/34 0.750 0.011 21 20 1.000 0.015 32.0 36.5 26 0.039 0.019 7/34 0.950 0.011 22 24 1.200 0.015 38.4 43.8 26 0.039 0.019 7/34 1.150 0.011 23 25 1.250 0.015 40.0 45.6 26 0.039 0.0
10、19 7/34 1.200 0.011 24 26 1.300 0.015 41.6 47.4 26 0.039 0.019 7/34 1.250 0.011 25 34 1.700 0.020 54.4 62.0 26 0.039 0.019 7/34 1.650 0.015 26 37 1.850 0.020 59.2 67.5 26 0.039 0.019 7/34 1.800 0.015 27 40 2.000 0.020 64.0 73.0 26 0.039 0.019 7/34 1.950 0.015 28 50 2.500 0.020 80.0 91.2 26 0.039 0.0
11、19 7/34 2.450 0.015 29 60 3.000 0.020 96.0 109.4 26 0.039 0.019 7/34 2.950 0.015 30 64 3.200 0.020 102.4 116.7 26 0.039 0.019 7/34 3.150 0.015 1/ Nominal values are for information only. Dimensions and configuration: See figure 1 and table I. Insulation material: Polyvinylchloride (PVC). Voltage rat
12、ing: 300 volts rms at sea level. Conductor coating: Tin. Conductor stranding: See table I. Weight: See table I. Insulation flaws: 2,500 volts rms. Dielectric withstanding voltage: 2,000 volts rms. Insulation resistance: 500 megohms-1,000 feet (minimum). Conductor resistance: 69.0 ohms maximum/1,000
13、feet at 23 C. Temperature rating: -20 C to +105 C. Thermal shock: -555 C to +1055 C, shrinkage 0.0625 inch maximum either end. Flexing endurance: -205 C to +1055 C, 50 cycles. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-49055/1E 3 Moistur
14、e resistance: Insulation resistance 50 megohms: 1,000 feet (minimum). Low pressure (elevated temperature): +105 C (maximum conductor temperature). Shrinkage: 0.125 inch maximum either end. Color: Optional. Part or Identifying Number (PIN): The term Part or Identifying Number (PIN) is equivalent to t
15、he term part number which was previously used in this specification. The PIN consists of the letter M, the basic number of the specification sheet, and a dash number from table I. Example PIN construction for a 34 conductor, 28 AWG, 1.700 inch wide cable: M49055/1-10 Specification sheet no. Dash no.
16、 from table I Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issues due to the extensiveness of the changes. Referenced document. This document references MIL-DTL-49055. CONCLUDING MATERIAL Custodians: Preparing activity
17、: Army - CR DLA - CC Navy - AS Air Force - 85 DLA - CC (Project 6145-2011-006) Review activities: Army - AR, AT, AV, CR4, MI Navy - EC, MC, OS, SH Air Force 99 Note: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information using the Assist Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
