欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    DLA MIL-DTL-3922 52 D-2010 FLANGES WAVEGUIDE (PRESSURIZABLE CONTACT).pdf

    • 资源ID:690711       资源大小:68.58KB        全文页数:9页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    DLA MIL-DTL-3922 52 D-2010 FLANGES WAVEGUIDE (PRESSURIZABLE CONTACT).pdf

    1、AMSC N/A FSC 5985 MIL-DTL-3922/52D 16 March 2010 SUPERSEDING MIL-F-3922/52C 6 March 2000 DETAIL SPECIFICATION SHEET FLANGES, WAVEGUIDE (PRESSURIZABLE CONTACT) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the flang

    2、es described herein shall consist of this specification sheet and MIL-DTL-3922. FIGURE 1. Flange. INCH-POUND C A B TOL V MP DIA.8 PLSCBOREDD DIA. X .060 DEEPAA .02D TOTALBREAKSHARPCORNERSUTZAA.010.003BBCCEEGG45 .5 GGHH- A -C A TDL JJ C B TDL JJ AFF- A - TDL KKGROOVED FLANGESECTION A-AFLAT FACEDFLANG

    3、E4 SIDES 63 B .090 .0304 PLS HH ALTERNATE CORNER CONSTRUCTION- B - CMARKINGE ED DKF DIA.2 PLSNYLMSECTION B-BC A B TOL J MA .TOL X TOTALA .004 TOTALA .004 TOTAL SRB .004 TOTALB .004 TOTALA .020 TOTAL B .020 TOTALB TOL X TOTAL BProvided by IHSNot for ResaleNo reproduction or networking permitted witho

    4、ut license from IHS-,-,-MIL-DTL-3922/52D 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents (to the nearest 0.01 mm) are given for general information only and are based upon 1.00 inch = 25.4 mm. 3. Mating surfaces, including seal groove, shall not exceed 63 microinches in accordance with A

    5、SME B46.1, except that flaws shall be included in the roughness height measurement. 4. Flat face flanges require a metal-rubber seal at the junction. These seals are covered by MIL-DTL-24211. 5. For lettered dimensions, see table I. 6. Counterbore of the eight holes is not required when flanges are

    6、made from bar stock. Inches mm .003 0.08 .004 0.10 .010 0.25 .020 0.51 .030 0.76 .040 1.02 .060 1.52 .090 2.29 TABLE I. Dash numbers and dimensions. PIN M3922/52- 1/ Dimensions 2/ Dash Used with Dash Used with No. 3/ Waveguide M85/1- Mating flange No 4/ Waveguide M85/1- MatingflangeA B C .02 (0.51)

    7、D BSC E BSC F Dia. G BSC 001 023 015 017 5/ 002 024 018, 019, 168 5/ 6.500 .005 (165.10) (0.13)3.250 .005 (82.55) (0.13)8.69 (220.73)1.249 (31.72) 2.311 (58.70) .330 .005(8.38) (0.13)2.374 (60.30)003 025 021 023 “ 004 026 025, 026, 169 “ 5.100 .005 (129.54) (0.13)2.550 .005 (64.77) (0.13)7.16 (181.8

    8、6)1.031 (26.19) 1.925 (48.90) .266 .005(6.76) (0.13)1.987 (25.07)005 027 027 031 “ 006 028 029, 030, 170 “ 4.300 .005 (109.22) (0.13)2.150 .005 (54.61) (0.13)6.34 (161.04).938 (23.82) 1.720 (43.69) “ 1.787 (45.39)007 029 033 037 “ 008 030 035, 036, 171 “ 3.400 .005 (86.36) (0.13) 1.700 .005 (43.18)

    9、(0.13)5.44 (138.18).671 (17.04) 1.500 (38.10) “ 1.344 (34.14)009 031 039 043 “ 010 032 041, 042, 172 “ 2.840 .005 (72.14) (0.13) 1.340 .005 (34.04) (0.13)4.50 (114.30).578 (14.68) 1.164 (29.57) .257 .003(6.53) (0.08)1.281 (32.54)011 033 045 049 “ 012 034 047, 048, 173 “ 2.290 .005 (58.17) (0.13) 1.1

    10、45 .005 (29.08) (0.13)3.88 (98.55).500 (12.70) 1.050 (26.67) .257 .002(6.53) (0.05)1.070 (27.18)013 035 051 055 “ 014 036 053, 054, 174 “ 1.872 .005 (47.55) (0.13) .872 .005 (22.15) (0.13)3.50 (88.90).438 (11.12) .914 (23.22) - .563 (14.30)015 037 057 061 “ 016 038 059, 060, 175 “ 1.590 .004 (40.39)

    11、 (0.10) .795 .004 (20.19) (0.10)3.19 (81.03).375 (9.52) .875 (22.22) - .500 (12.70)017 039 063 067 “ 018 040 065, 066, 176 “ 1.372 .004 (34.85) (0.10) .622 .004 (15.80) (0.10)2.69 (68.33).313 (7.95) .719 (18.26) - .438 (11.12)019 041 069 073 “ 020 042 071, 072, 177 “ 1.122 .004 (28.50) (0.10) .497 .

    12、004 (12.62) (0.10)2.50 (63.50)” .640 (16.26) - .375 (9.52) 021 043 075 079 “ 022 044 077, 078, 178 “ .900 .003 (22.86) (0.08) .400 .003 (10.16) (0.08)2.09 (53.09)“ .578 (14.68) - .312 (7.92) See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without l

    13、icense from IHS-,-,-MIL-DTL-3922/52D 3 TABLE I. Dash numbers and dimensions - Continued. Dimensions 2/ Dash No. 3/ Dash No. 4/ H BSC J K .02 (0.51) L .02 (0.51) M N .004 (0.10) P Dia. R .02 (0.51) S T .004 (0.10) U .004 (0.10) 001 023 002 024 3.937 (100.00) .012 (0.30) 5.44 (138.18) 3.81 (96.77) 3.4

    14、20 -.001 (86.87) (0.03) +.000 3.630 (92.20).330 .005 (8.38) (0.13)7.06 (179.32)6.670 -.001 (169.42) (0.03) +.000 6.880 (174.75)7.452 (189.28)003 025 004 026 3.200 (81.28) .011 (0.28) 4.62 (117.35) 3.10 (78.74) 2.720 -.001 (69.09) (0.03) +.000 2.920 (74.17).266 .005 (6.76) (0.13)5.67 (144.02)5.270 -.

    15、001 (133.86) (0.03) +.000 5.470 (138.94)6.042 (153.47)005 027 006 028 2.795 (71.00) “ 4.19 (106.43) 2.69 (68.33) 2.320 -.001 (58.93) (0.03) +.000 2.510 (63.75)“ “ 4.88 (123.95)4.470 -.001 (113.54) (0.03) +.000 4.660 (118.36)5.232 (132.89)007 029 008 030 2.344 (59.54) “ 3.75 (95.25) 2.25 (57.15) 1.87

    16、0 -.003 (47.50) (0.08) +.000 2.062 (53.37)“ “ 4.00 (101.60)3.570 -.003 (90.68) (0.08) +.000 3.782 (96.06) 4.354 (110.59)009 031 010 032 1.914 (48.62) .004 (0.10) 3.00 (76.20) 1.75 (44.45) 1.510 -.003 (38.35) (0.08) +.000 1.624 (41.25).257 +.005 (6.53) (0.13)-.0003.25 (82.55)3.010 -.003 (76.45) (0.08

    17、) +.000 3.124 (79.35) 3.500 (88.90)011 033 012 034 1.620 (41.15) .005 (0.13) 2.75 (69.85) 1.50 (38.10) 1.283 -.003 (32.59) (0.08) +.000 1.395 (35.43)“ “ 2.63 (66.80)2.428 -.003 (61.67) (0.08) +.000 2.540 (64.52) 2.916 (74.07)013 035 014 036 1.414 (35.92) - 2.50 (63.50) 1.25 (31.75) 1.010 -.004 (25.6

    18、5) (0.10) +.000 1.122 (28.50)“ “ 2.25 (57.15)2.010 -.004 (51.05) (0.10) +.000 2.122 (53.90) 2.498 (63.45)015 037 016 038 1.273 (32.33) - 2.44 (61.98) 1.13 (28.70) .931 -.002 (23.64) (0.05) +.000 1.045 (26.54)“ “ 1.94 (49.28)1.726 -.002 (43.84) (0.05) +.000 1.840 (46.74) 2.216 (56.29)017 039 018 040

    19、1.094 (27.79) - 1.94 (49.28) 1.00 (25.40) .758 -.003 (19.25) (0.08) +.000 .872 (22.15).196 +.004 (4.98) (0.10)-.0001.75 (44.45)1.508 -.003 (38.30) (0.08) +.000 1.622 (41.20) 1.904 (48.36)019 041 020 042 .953 (24.21) - 1.75 (44.45) .88 (22.35) .633 -.003 (16.08) (0.08) +.000 .747 (18.97).169 +.002 (4

    20、.29) (0.05)-.0001.50 (38.10)1.258 -.003 (31.95) (0.08) +.000 1.372 (34.85) 1.654 (42.01)021 043 022 044 .828 (21.03) - 1.59 (40.39) .75 (19.05) .506 -.001 (12.86) (0.03) +.000 .624 (15.85).169 +.002 (4.29) (0.05)-.0001.38 (35.05)1.006 -.001 (25.55) (0.03) +.000 1.124 (28.55) 1.406 (35.71)See footnot

    21、es at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3922/52D 4 TABLE I. Dash numbers and dimensions - Continued. Dimensions 2/ Dash No. 3/ Dash No. 4/ V X Y .0040 (0.10) Z Max AA .005 (0.13) BB .02 (0.51)CC .02 (0.51)DD .005 (

    22、0.13) EE .003(0.08)FF .02 (0.51) GG Max HH .02 (0.51) JJ KK 001 023 002 024 .012 (0.30) .003 (0.08) 4.202 (106.73) .005 (0.13) .062 (1.57) .50 (12.70).88 (22.35).594 (15.09).143 (3.63).25 (6.35) .05 (1.27) .25 (6.35) .005 (0.13) .005 (0.13) 003 025 004 026 .011 (0.28) ” 3.492 (88.70) “ “ “ “ .531 (1

    23、3.49)“ “ “ “ “ “ 005 027 006 028 “ “ 3.082 (78.28) “ “ “ “ “ “ “ “ “ “ “ 007 029 008 030 “ “ 2.634 (66.90) “ “ “ “ “ “ “ “ “ “ “ 009 031 010 032 .007 (0.18) ” 2.000 (50.80) .002 (0.05) .053 (1.35) .38 (9.65).69 (17.53)“ .094 (2.39).31 (7.87) “ .31 (7.87) “ “ 011 033 012 034 “ “ 1.771 (44.98) “ “ “ “

    24、 “ “ “ “ “ “ “ 013 035 014 036 “ “ 1.498 (38.05) “ “ “ “ “ “ “ .03 (0.76) “ “ “ 015 037 016 038 “ .002 (0.05) 1.421 (36.09) “ “ “ “ “ “ “ “ “ .004 (0.10) .004 (0.10) 017 039 018 040 .006 (0.15) “ 1.154 (29.31) “ .040 (1.02) .25 (6.35).50 (12.70).438 (11.31).070 (1.78).25 (6.35) “ .25 (6.35) “ “ 019

    25、041 020 042 .005 (0.13) “ 1.029 (26.14) “ “ “ “ .406 (10.31)“ “ “ “ “ “ 021 043 022 044 .005 (0.13) “ .906 (23.01) “ “ “ “ .406 (10.31)“ “ “ “ .003 (0.08) .003 (0.08) 1/ PINs 001 through 022 are for flat flanges; PINs 023 through 044 are for grooved flanges. 2/ Metric equivalents are in parentheses.

    26、 3/ Copper alloy. 4/ Aluminum alloy. 5/ Each flange mates with an identical PIN. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3922/52D 5 NOTES: 1. Dimensions are in inches. 2. Metric equivalents (to the nearest .01 mm) are given for genera

    27、l information only and are based on 1.00 inch = 25.4 mm. 3. One seal is to be supplied with each grooved flange. Inches mm Inches mm .003 0.08 .125 3.18 .005 0.13 .164 4.17 .010 0.25 .190 4.83 .015 0.38 .203 5.16 .030 0.76 .250 6.35 .031 0.79 .3125 7.94 .040 1.02 .625 15.88 .047 1.19 .75 19.05 .062

    28、1.57 1.0 25.40 .078 1.98 1.5 38.10 FIGURE 2. Grooved flange seal. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3922/52D 6 TABLE II. Gasket dimensions. Style Flange Dimensions 1/ used with M3922/52- A B .010 (0.25) C I 023-024 7.454 .015 (1

    29、89.33) (0.38) 4.204 (106.78) .288 - .010 (7.32) (0.25) +.000 I 025-026 6.044 .015 (153.52) (0.38) 3.494 (88.75) “ I 027-028 5.234 .015 (132.94) (0.38) 3.084 (78.33) “ I 029-030 4.336 .015 (110.13) (0.38) 2.636 (66.95) “ II 031-032 3.451 .015 (87.66) (0.38) 1.951 (49.56) .139 .004 (3.53) (0.10) II 03

    30、3-034 2.867 .010 (72.82) (0.25) 1.722 (43.74) “ II 035-036 2.449 .010 (62.20) (0.25) 1.449 (36.80) “ II 037-038 2.167 .010 (55.04) (0.25) 1.372 (34.85) “ II 039-040 1.866 .010 (47.40) (0.25) 1.116 (28.35) .103 .003 (2.62) (0.08) II 041-042 1.616 .010 (41.05) (0.25) .991 (25.17) “ II 043-044 1.368 .0

    31、10 (34.75) (0.25) .868 (22.05) “ 1/ Metric equivalents are in parentheses. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3922/52D 7 REQUIREMENTS: Dimensions and configuration: Flange: See figure 1 and table I. Gasket: See figure 2. Material

    32、: Flange: Metallic base alloy as specified in table I. Items supplied with flanges: See table III. Marking: See figure 1. Part or Identifying Number (PIN): M3922/52- (and dash number from table I.) AN nomenclature and engineering data: See table IV. Minimum pressure applied shall be 120 Kilopascal (

    33、KPa). TABLE III. Items supplied with flange. PIN 1/ M3922/52- Hexagon head cap screw Hexagon nut Spring lockwasher Quantity (each) 001, 002, 023, 024 (5/16) .3125-18 UNC-2A, 1.5 inch long (5/16) .3125-18 UNC-2B .3125 x .078 5 003, 004, 005, 006, 007, 008, 025, 026, 027, 028, 029, 030 (1/4) .250-20 U

    34、NC-2A, 1.5 inch long (1/4) .250-20 UNC-2B .250 x .062 5 009, 010, 011, 012, 031, 032, 033, 034 (1/4) .250-20 UNC-2A, 1.0 inch long (1/4) .250-20 UNC-2B .250 x .062 5 013, 014, 015, 016, 035, 036, 037, 038 (1/4) .250-20 UNC-2A, 1.0 inch long (1/4) .250-20 UNC-2B .250 x .062 4 017, 018, 039, 040 (No.

    35、10) .190-32 UNF-2A, .750 inch long (No. 10) .190-32 UNF-2B .190 x .047 4 019, 020, 021, 022, 041, 042, 043, 044 (No. 8) .164-32 UNC-2A, .750 inch long (No. 8) .164-32 UNC-2B .164 x .040 4 1/ One gasket (see figure 2) shall be supplied with each PIN 023 through 044. Provided by IHSNot for ResaleNo re

    36、production or networking permitted without license from IHS-,-,-MIL-DTL-3922/52D 8 TABLE IV. Cross-reference of PINs/AN nomenclature and engineering data. PIN M3922/52- AN nomenclature Frequency range 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025

    37、 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 UG-1714/U UG-1720/U UG-1715/U UG-1717/U UG-1716/U UG-1711/U UG-1712/U UG-1713/U UG-1724/U UG-1725/U UG-1726/U UG-1727/U UG-1728/U UG-1729/U UG-1730/U UG-1731/U UG-1732/U UG-1733/U UG-1734/U UG-1735/U UG-1736/U UG-1737/U UG-

    38、1362/U UG-1343/U UG-1718/U UG-1719/U UG-1344/U UG-1345/U UG-1346/U UG-1347/U UG-1348/U UG-1349/U UG-1350/U UG-1351/U UG-1352/U UG-1353/U UG-1354/U UG-1355/U UG-1356/U UG-1357/U UG-1358/U UG-1359/U UG-1360/U UG-1361/U GHz 1.12 - 1.70 1.12 - 1.70 1.45 - 2.20 1.45 - 2.20 1.70 - 2.60 1.70 - 2.60 2.20 -

    39、3.30 2.20 - 3.30 2.60 - 3.95 2.60 - 3.95 3.30 - 4.90 3.30 - 4.90 3.95 - 5.85 3.95 - 5.85 4.90 - 7.05 4.90 - 7.05 5.85 - 8.20 5.85 - 8.20 7.05 - 10.0 7.05 - 10.0 8.20 - 12.40 8.20 - 12.40 1.12 - 1.70 1.12 - 1.70 1.45 - 2.20 1.45 - 2.20 1.70 - 2.60 1.70 - 2.60 2.20 - 3.30 2.20 - 3.30 2.60 - 3.95 2.60

    40、- 3.95 3.30 - 4.90 3.30 - 4.90 3.95 - 5.85 3.95 - 5.85 4.90 - 7.05 4.90 - 7.05 5.85 - 8.20 5.85 - 8.20 7.05 - 10.0 7.05 - 10.0 8.20 - 12.40 8.20 - 12.40 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3922/52D 9 Referenced documents: In addit

    41、ion to MIL-DTL-3922, this document references the following: MIL-DTL-24211 ASME B46.1 The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever f

    42、or any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air

    43、 Force - 85 (Project 5985-2009-034) DLA - CC Review activities: Army - AV, MI Navy - AS, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-


    注意事项

    本文(DLA MIL-DTL-3922 52 D-2010 FLANGES WAVEGUIDE (PRESSURIZABLE CONTACT).pdf)为本站会员(syndromehi216)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开