1、AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, PLUG ASSEMBLY, OPEN WIRE, 90, CLASSES D, DS, P, T, TS, Z, AND ZS This specification is approved for use by all Departments and Agencies of the Department of D
2、efense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-28840. FIGURE 1. Dimensions and configuration. MIL-DTL-28840/18E 14 November 2013 SUPERSEDING MIL-DTL-28840/18D 23 October 2009 INCH-POUND Provided by IHSNot for ResaleNo reprodu
3、ction or networking permitted without license from IHS-,-,-MIL-DTL-28840/18E 2 Shell size designator (see note 3) Assembly Part or Identifying Number (PIN) (see note 6) Connector plug (PIN) (see note 6) Backshell assembly (PIN) (see note 6) B thread class 2B F Cable entry open closed A (11) M28840/1
4、8*A* M28840/16*A* M28840/2A* .750-.1P-.2L-D.S. .286 (7.26) .177 (4.50) B (13) M28840/18*B* M28840/16*B* M28840/2B* .875-.1P-.2L-D.S. .286 (7.26) .177 (4.50) C (15) M28840/18*C* M28840/16*C* M28840/2C* 1.062-.1P-.2L-D.S. .416 (10.57) .250 (6.35) D (17) M28840/18*D* M28840/16*D* M28840/2D* 1.125-.1P-.
5、2L-D.S. .476 (12.09) .291 (7.39) E (19) M28840/18*E* M28840/16*E* M28840/2E* 1.312-.1P-.2L-D.S. .626 (15.90) .348 (8.84) F (23) M28840/18*F* M28840/16*F* M28840/2F* 1.500-.1P-.2L-D.S. .831 (21.11) .429 (10.90) G (25) M28840/18*G* M28840/16*G* M28840/2G* 1.625-.1P-.2L-D.S. .956 (24.28) .523 (13.28) H
6、 (29) M28840/18*H* M28840/16*H* M28840/2H* 1.812-.1P-.2L-D.S. 1.081 (27.46) .643 (16.33) J (33) M28840/18*J* M28840/16*J* M28840/2J* 2.000-.1P-.2L-D.S. 1.187 (30.15) .704 (17.88) FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted wi
7、thout license from IHS-,-,-MIL-DTL-28840/18E 3 Shell size designator (see note 3) Assembly (PIN) (see note 6) Connector plug (PIN) (see note 6) Backshell assembly (PIN) (see note 6) L max Q max Z max Max OD over rear clamps A (11) M28840/18*A* M28840/16*A* M28840/2A* 2.562 (65.07) 1.028 (26.11) .929
8、 (23.60) .832 (21.13) B (13) M28840/18*B* M28840/16*B* M28840/2B* 2.562 (65.07) 1.141 (28.98) .929 (23.60) .832 (21.13) C (15) M28840/18*C* M28840/16*C* M28840/2C* 2.750 (69.85) 1.263 (32.08) 1.056 (26.82) .989 (25.12) D (17) M28840/18*D* M28840/16*D* M28840/2D* 2.875 (73.03) 1.387 (35.23) 1.233 (31
9、.32) 1.094 (27.79) E (19) M28840/18*E* M28840/16*E* M28840/2E* 3.000 (76.20) 1.513 (38.43) 1.296 (32.92) 1.319 (33.50) F (23) M28840/18*F* M28840/16*F* M28840/2F* 3.125 (79.38) 1.703 (43.26) 1.358 (34.49) 1.557 (39.55) G (25) M28840/18*G* M28840/16*G* M28840/2G* 3.250 (82.55) 1.825 (46.36) 1.420 (36
10、.07) 1.653 (41.99) H (29) M28840/18*H* M28840/16*H* M28840/2H* 3.375 (85.73) 2.143 (54.43) 1.634 (41.50) 1.819 (46.20) J (33) M28840/18*J* M28840/16*J* M28840/2J* 3.438 (87.33) 2.329 (59.16) 1.859 (47.22) 2.020 (51.31) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for informati
11、on only. 3. Shell sizes are provided within parentheses for information and are not a part of the designator. 4. Dimensions apply after plating. 5. Normal mating key position shown. Alternate key positions in accordance with MIL-DTL-28840. 6. Assembly shall be made of a connector and backshell of th
12、e same material. FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/18E 4 REQUIREMENTS: Dimensions and configuration: See figure 1. Classes: D, DS, P, T, TS, Z and ZS. Insert arrangements:
13、See the figure of MIL-STD-1698 corresponding to the desired shell size. Contacts: Pin or socket, crimp type, styles P, S, D, E, F or G, in accordance with MIL-DTL-28840. Shell polarization: 1 thru 6, key position. Marking: Part or Identifying Number (PIN) on shell. Mating counterpart: Mating connect
14、ors in accordance with MIL-DTL-28840/10, /11, /12, /14, /20 and /21. Installation and removal tools: In accordance with MIL-I-81969/33 and /34. PINs shown indicate aluminum alloy hardware. If corrosion resistant steel parts are required, the connector and accessory PIN must be changed to designate c
15、orrosion resistant hardware. PIN example: M28840/ 18 A G 1 P 1 Military designator Specification sheet number Class code letter (Class D, code letter A) (Class DS, code letter B) (Class P, code letter F (Class T, code letter L) (Class TS, code letter N) (Class Z, code letter S) (Class ZS, code lette
16、r R) Shell size (See figure 1) Insert arrangement (See figure 1 and MIL-STD-1698) Contact style (See MIL-DTL-28840) Keying (See MIL-DTL-28840) RESTRICTIONS: Classes D and DS are inactive for NAVSEA new design, unless approved by NAVSEA. Provided by IHSNot for ResaleNo reproduction or networking perm
17、itted without license from IHS-,-,-MIL-DTL-28840/18E 5 Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for
18、 any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Referenced documents. In addition to MIL-DTL-28840, this document
19、references the following: MIL-DTL-28840/2 MIL-DTL-28840/10 MIL-DTL-28840/11 MIL-DTL-28840/12 MIL-DTL-28840/14 MIL-DTL-28840/16 MIL-DTL-28840/20 MIL-DTL-28840/21 MIL-I-81969/33 MIL-I-81969/34 MIL-STD-1698 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - EC Air Force - 85
20、DLA - CC (Project 5935-2013-116) Review activities: Army AV, MI Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
