1、NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (WMMDD) 04-05-07 11 I Page 4, Part or Identifying Number (PIN): Delete shell size “1 1“ and substitute “08“. Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 CON
2、NECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45“, INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION, (FOR MIL-DTL-83723 SERIES III, MIL-C-5015 CRIMP, SAE-AS81703 SERIES III, AND MIL-C-26482 il). 3. (X one) Form Approved O1 88 OMB NO. 0704- X (1) Existing document supplemented by the NOR may
3、be used in manufacture. 2. PROCURING ACTIVITY NO. I. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT DSCC-VAI 3. DODAAC c. TYPED NAME (First. Middle Initial. Last) Richard L. Taylor 6. NOR NO. 5935-R040-03 I. TITLE 2H IEF, INTERCONNECTION IEVICES 5a. ACTIVITY ACCOMPLISHING REVISION DSCC-VAI 8.
4、DOCUMENT NO 93043 f. DATE SIGNED e. SIGNATURE (04-0507) Richard L. Taylor b. REVISION COMPLETED (Signature) c. DATE SIGNED (04-0507) Jeffery Tunstall ECPNO N/A 13. DESCRIPTION OF REVISION Ure 1: Add “Max cable range“ column to accessory shell size table, as shown to the left. Cable no Provided by IH
5、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-LTR A 5EV STATUS DESCRIPTION DATE APPROVED Update format. 16 July 02 Robert Heber Correcting references. Correcting address list of sources. MIC NIA CHECKED BY Abdo Abdouni Original date of drawing 14 November 1994 T
6、ITLE CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45“, INDIVIDUAL AND PREPAREDBY Jeffew Tunstall APPROVEDBY Rob Heber I DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS. OHIO 4321 6-5000 /OR OVERALL SHIELD TERMINATION, CATEGORY IA (FOR MIL-DTL-83723 SERIES 111, MIL-C-5015 CRIMP, SAE-AS81703
7、SERIES 111, AND MIL-C-26482 il) SIZE A DWG. NO. 93043 CAGE CODE 03723 REV A PAGE 1 OF 5 iMSC NIA 5935-E682 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-KNURL ST OPTION - TYP - STYLE A DESIGN OPTIONAL v FB I STYLE B STYLE C FIGURE I. Dimensions and
8、 confiquration. CAGE CODE DWG NO. 03723 93043 A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 4321 6-5000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Clamp size o1 02 03 04 05 06 07 08 o9 10 11 NOTES: 1. Dimensions are in millimeters. Inch-pound e
9、quivalents are in parentheses. 2. Dimensions apply after plating. 3. The U.S. Government preferred system of measurements is the metric SI system. However, this item was originally using inch-pound units of measurement, in the event of conflict between the metric and inch-pound units, the inch-pound
10、 units shall take precedence. FIGURE 1. Dimensions and confiauration - Continued. Cable accommodation range B max K max N max 3.99 (.157) 5.33 (.210) 19.30 (.760) 21.4 (.84) 16.0 (.63) 4.75 (.187) 7.92 (.312) 19.30 (.760) 23.0 (.91) 19.2 (.76) 7.14 (.281) 11.13 (.438) 19.30 (.760) 27.8 (1.09) 23.9 (
11、.94) 9.83 (.387) 14.27 (562) 19.30 (.760) 30.1 (1.19) 27.1 (1.07) 10.80 (.425) 15.88 (.625) 19.30 (.760) 32.5 (1.28) 30.3 (I. 19) 14.61 (575) 19.05 (.750) 19.30 (.760) 38.1 (1.50) 35.1 (1.38) 17.78 (.700) 23.83 (.938) 27.30 (1.073) 43.7 (1.72) 39.0 (1 54) 22.53 (.887) 31.75 (1.250) 33.60 (1.323) 52.
12、4 (2.06) 46.9 (1.85) 30.48 (1.200) 34.93 (1.375) 33.60 (1.323) 58.7 (2.31) 57.3 (2.26) 33.65 (1.325) 41.28 (1.625) 39.93 (1 572) 69.1 (2.72) 63.8 (2.51) 40.01 (1.575) 47.60 (1.875) 39.93 (1.572) 75.4 (2.97) 70.0 (2.76) Min Max CAGE CODE 03723 A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000
13、 DWG NO. 93043 - PAGE 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REQUIREMENTS: DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 Shall be in accordance with MIL-C-85049, category IA. Backshell shall be capable of terminating individual a
14、ndlor overall shields or double overall shields and provide an environmental seal. CAGE CODE DWG NO. SIZE 03723 93043 REV A PAGE 4 A Design and construction: See figure I. Interface dimensions shall confirm to MIL-C-85049 accessory intermateability data for MIL-C-5015 crimp. Material: Accessory comp
15、onents: Aluminum alloy shall be in accordance with MIL-C-85049. O-ring and grommet: Shall be in accordance with MlL-C-85049. Finish: N and W shall be in accordance with MIL-C-85049. Finish N is for space application only. Part or Identifying Number (PIN): The PIN shall be in accordance with the foll
16、owing: Example: 93043 jl- - C - 05 Drawing num ber Shell Finish size z (see figure 1) Strain relief style Cable accommodation range Marking: Marking shall be in accordance with MIL-(2-85049 except the PIN shall be as stated above. QUALIFICATION: Qualification inspection: Qualification inspection for
17、 the adapter specified herein shall not be required. Qualification conformance inspection: Shall be in accordance with MIL-C-85049. Inspection of packaging: Shall be in accordance with MIL-(2-85049. Methods of inspection: Shall be in accordance with MIL-C-85049. Provided by IHSNot for ResaleNo repro
18、duction or networking permitted without license from IHS-,-,-DSCC drawing Vendor CAGE PIN I! number 31461 I 06324 , 93043* E5430A I 390FS005 - I/ Parts must be purchased to this DSCC PIN to assure that ail performance requirements and tests are met. Vendor CAGE number Vendor name and address 31461 06324 Electro Adapter, Incorporated 20640 Nordhoff Street Chatsworth. CA 9131 1 Glenair, incorporated 121 1 Air Way Glendale, CA 91201-2497 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
