1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-03-24 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear
2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def
3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET
4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb
5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R019-03 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.86119 9. TITLE OF DOCUMENT Connector, Plug, Electrical, Series SSMA, Pin Contact, For Flexible Cable 10. REVISION LETTER
6、11. ECP NO.N/A a. CURRENTE b. NEWF 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “F” Revisions description column; add “Changes in accordance with NOR 5935-R019-03”. Revisions date column; add “03-03-24” Revisions rev status
7、 of pages, blocks 1 and 3, add “F”. Revisions rev status of sheet 1, add “F”. Sheet 3: Revisions Ltr block, delete “D” and substitute “F” Sheet 3: REQUIREMENTS Coupling proof torque, delete “15 inch-pounds, minimum” and substitute “7 inch-pounds, minimum” 14. THIS SECTION FOR GOVERNMENT USE ONLY a.
8、(X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE
9、 FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)RICHARD L. TAYLOR d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERichard L. Taylorr f. DATE SIGNED (YYMMDD) 03-03-24 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)03
10、-03-24 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-01-17 Form Approved OMB
11、 No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comment
12、s regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington,
13、 VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY N
14、UMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R014-03 a. TYPED NAME (First, Middle Initial, Last) Ron Gar
15、y 7. CAGE CODE037Z3 8. DOCUMENT NO.86119 9. TITLE OF DOCUMENT Connector, Plug, Electrical, Series SSMA, Pin Contact, For Flexible Cable 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTD b. NEWE 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr.
16、 Column; add “E” Revisions description column; add “Changes in accordance with NOR 5935-R014-03”. Revisions date column; add “” Revisions rev status of pages, blocks 1 and 5, add “E”. Revisions rev status of sheet 1, add “E”. Sheet 5: Revisions Ltr block, delete “D” and substitute “E” Sheet 5: Add t
17、he following new Vendor PIN “ DSCC drawing PIN 1/ Vendor CAGE Vendor reference PIN Number 86119ZSG 00779 1045486-1 “ 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufactur
18、er may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M
19、. Heber f. DATE SIGNED (YYMMDD) 03-01-17 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)03-01-17 DD Form 1695, APR 92 Previous editions are obsolete Sheet 5: Add the following vendor: “ Vendor CAGE Vendor name Number and address 00779 TY
20、CO Electronics P. O. Box 3608 Harrisburg PA 17105 “ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REVISIONS LTR DESCRIPTION DATE APPROVED A Add source. 7 Jun 1990 R. Marbais B Add CAGE 34078 as source. 4 Jun 1991 Randy Larson C Add CAGE 95077 as so
21、urce. 20 Mar 1995 Randy Larson D PIN and source update 16 Nov 2001 Robert M. Heber Requirements of DSCC drawing 84148 are applicable. Prepared in accordance with MIL-STD-100. REV PAGE REV D D D D REV STATUS OF PAGES PAGE 1 2 3 4 PREPARED BY PMIC N/A Ron Gary DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS,
22、 OHIO 43216-5000 CHECKED BY TITLE Jeffery Bohannon APPROVED BY Richard Marbais CONNECTOR, PLUG, ELECTRICAL, SERIES SSMA, PIN CONTACT, FOR FLEXIBLE CABLE SIZE CAGE CODE 037Z3 DWG. NO. 86119 Original date of drawing 21 January 1987 A REV D PAGE 1 OF 4 AMSC N/A 5935-E632 DISTRIBUTION STATEMENT A. Appro
23、ved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86119 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 2 NOTES: 1. Dimensions are in inches. 2. Metric
24、equivalents are given for general Information only. 3. Wrench flats are to accommodate standard wrench opening in accordance with FED-STD-H28, appendix 10. 4. All undimensioned pictorial configurations are for reference purposes only. 5. Dimensions 1.281 (32.54 mm) defines the maximum overall length
25、 of the connector when assembled to the cable. 6. Assembled using crimp tool M22520/5-01, die M22520/5-03, closure A. 7. Coupling nut is to be passivated corrosion resisting steel in accordance with MIL-PRF-39012. FIGURE 1. General configuration. Inches mm .250 6.35 1.062 26.97 1.281 32.54 Provided
26、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86119 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 3 ENGINEERING DATA: Nominal impedance: 50 ohms. Frequency range: 0 - 26 GHz. (Connector performance only. F
27、requency range dependent on cable used.) Voltage rating: 250 V rms at sea level. 60 V rms at 70,000 feet. Operating temperature: -65C to +165C. REQUIREMENTS: Requirements of drawing 84148 applicable. Dimensions and configuration: See figure 1. Force to engage and disengage: Longitudinal force: Not a
28、pplicable. Torque: 2 inch-pounds, maximum. Coupling proof torque: 15 inch-pounds, minimum. Hermetic seal: Not applicable. Leakage (pressurized connectors): Not applicable. Center contact retention: 4 pounds, minimum. Radial torque: Not applicable. Voltage standing wave ratio (VSWR): 1.07 + .015F (F
29、in GHz)dB, maximum. (Not applicable to RG179.) Moisture resistance: Method 106, MIL-STD-202, no measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes after removal from humidity. Contact resistance (in milliohms, maximum): Initial After environment Cente
30、r contact: 4.0 4.0 Outer contact: 2.0 Not applicable Braid to body: 0.5 Not applicable Dielectric withstanding voltage at sea level: 750 V rms, minimum. Vibration, high frequency: Method 204, test condition D, MIL-STD-202. Corona level: Altitude: 70,000 feet. 190 V rms, minimum. Shock (specified pul
31、se): Method 213, test condition I, MIL-STD-202. Thermal shock: Method 107, test condition B, MIL-STD-202, except test high temperature shall be +85C. Barometric pressure (reduced): Not applicable. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE
32、CAGE CODE DWG NO. 037Z3 86119 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 4 RF high potential withstanding voltage: 500 V rms, minimum. Frequency: 5 MHz. Leakage current: Not applicable. Cable retention force: 20 pounds, minimum. Torque: 16 inch-ounces, minimum. Coupling mec
33、hanism retention force: 80 pounds, minimum. RF leakage: -90 + F (F in GHz)dB, minimum. RF insertion loss: .04 F, GHz dB, maximum. Note: These parts are for use in general radio frequency applications. Part or Identifying Number (PIN): See table I. TABLE I. Connector to cable reference. PIN Cable acc
34、ommodation 86119ZSG M17/119-RG174, M17/94-RG179 M17/113-RG316, M17/172-00001, M17/173-00001 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of complia
35、nce has been submitted to DSCC-VAI. DSCC drawing PIN 1/ Vendor CAGE number Vendor reference PIN 86119ZSG 34078 95077 SSM-3188-55-001-02 SF2700-6035 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 34078 Midwest Microwave 6564 South State Road Saline, MI 48176 95077 Solitron/Vector Microwave Products 3301 Electronics Way West Palm Beach, FL 33407 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
