1、REVISIONS LTR DESCRIPTION DATE APPROVED A Add source 59976. 31 March 2005 Richard Taylor Prepared in accordance with MIL-STD-100 REV PAGE REV A A REV STATUS OF PAGES PAGE 1 2 3 4 5 PREPARED BY PMIC N/A Jeffery Tunstall DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Abdo A
2、bdouni APPROVED BY Richard L. Taylor CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES II SIZE CAGE CODE 037Z3 DWG. NO. 01040 Original date of drawing 13 August 2001 A REV A PAGE 1 OF 5 AMSC N/A 5935-E754-000 Provided by IHSNot for ResaleNo reproduction or networking permi
3、tted without license from IHS-,-,-SIZE CAGE CODE DWG NO. FIGURE 1. General configuration. 037Z3 01040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVA PAGE2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. Shell si
4、ze L max Q dia, max R dia + .005, -.006 W .015 8 .750 .316 10 .859 .43612 1.031 .549 14 1.156 .67516 1.281 .799 18 1.406 .893.547 20 1.531 1.018 22 .766 1.641 1.143 .524 24 .844 1.766 1.268 .575 Inches mm Inches mm Inches mm Inches mm .005 .13 .436 11.07 .766 19.46 1.143 29.03 .006 .15 .524 13.31 .7
5、99 20.29 1.268 32.21 .010 .25 .547 13.89 .844 21.44 1.406 35.71 .015 .38 .549 13.94 .859 21.82 1.531 38.89 .036 .91 .575 14.61 .893 22.68 1.641 41.68 .316 8.03 .675 17.15 1.018 25.86 1.766 44.86 .391 9.93 .750 19.05 1.031 26.19 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for
6、general information only. 3. For main key polarization and key positions, see MIL-DTL-38999. 4. Dimensions and tolerances are in accordance with ANSI-Y 14.5. 5. To the end of teeth. FIGURE 1. General configuration Continued. 037Z3 01040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVA
7、PAGE3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. REQUIREMENTS: (MS27473 is applicable). Design and construction, configuration, PIN, electrical, mechanical and environmental requirements shall be in accordance with MS27473
8、 class T, with the following exception: Material shall be stainless steel. Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: DD01040 T 10 E 99 S BDSCC drawing number Class
9、 Shell size Finish Insert arrangement number Contact style (P or S) Polarizing positions no letter is required for normal. 037Z3 01040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVA PAGE4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
10、,-SIZE CAGE CODE DWG NO. Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendor listed below has agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. DSCC drawing PIN Vendor CAG
11、E number Vendor similar PIN 1/ DD01040T10E99S 77820 10-545977-99S DD01040T10E99S 59976 AE273T10E99S 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE number Vendor name and address 77820 Amphenol Aerospace Corporation 40-60 Delaware Avenue Sidney, NY 13838-1395 59976 Aero-Electric Connector, Inc. 548 Amapola Ave Torrance, CA 90501 037Z3 01040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVA PAGE5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
