1、(INCH-POUND I AN31 16 Rev 3 9 Julv 2004 SU PERSE DING AN31 16 Rev 2 16 October 1952 DETAIL SPECIFICATION SHEET PLUG ASSEMBLY, INSTRUMENT ELECTRICAL This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product describe
2、d herein shall consist of this specification sheet. SPRING, 41A1999 (SEE TABLE) FERRULE ASSEMBLY HOUSING, 41A1929 45A7962 (SEE TABLE) PIN, 37A5160 SPACER, 37A5162 WASHER, 37A5161 1.406 APPROX _L FIGURE 1. Dimensions and confiqurations. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction o
3、r networking permitted without license from IHS-,-,-AN31 16 Rev 3 REQUIREMENTS: Design and construction: See figure 1 and table I. TABLE I. Materials. PIN AN31 16-1 inactive for new design and is replaced with PIN AN31 16-2, which is interchangeable with AN31 16-1. AN31 16-1 is not interchangeable w
4、ith AN3116-2. For definition and application of drawing status notes, see MIL-STD-962. Dimensions are in inches and are shown for reference only. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of
5、the changes. Reference documents. This document references the following: MIL-STD-962 CONCLUDING MATERIAL Custodians: Atty - AV DLA - CC Air Force - I1 Preparing activity: DLA - CC (Project 5935-4421 -000) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/www.dodssp.daps.mil. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
