1、INCH-POUND A-A-59742 October 25, 2002 COMMERCIAL ITEM DESCRIPTION INDUCTOR, CHIP, POWER, LOW RESISTANCE, SURFACE MOUNT The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE. This CID covers the general requirements for
2、 an inductor. Inductors covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION. This CID uses a classification system which is included in the Part Identification Number (PIN) as shown in the following example (see 7.1). AA59742 - 001 CID number Dash number (see t
3、able I) 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Inductors supplied to this CID shall be as specified herein. (see figure 1). 3.2. Electrical characteristics. The electrical characteristics shall be as specified in table I. 3.3 Weight. The weight shall be no greater than 0.
4、5 gram maximum. 3.4 Operating temperature range. The operating temperature range is 40C to +85C. 3.5 Temperature rise. DC current rating for a 15C rise. 3.6 Altitude. The maximum altitude is 70,000 feet. 3.7 Marking. Inductors supplied to this CID shall be marked with the manufacturers standard comm
5、ercial PIN. Beneficial comments recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-0557, or facsimile
6、(FAX) (614) 692-6939. AMSC N/A FSC 5950 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59742 Dimension Inches mm Dimension Inches mm A B C D E F .175 Max .260 Max
7、.155 Dia .115 Max .050 .170 4.45 Max 6.60 Max 3.94 Dia 2.92 Max 1.27 4.32 G H I J K L .040 .120 .055 .160 .270 .140 1.02 3.05 1.40 4.06 6.86 3.56 NOTES: 1. Dimensions are in Inches. 2. Metric equivalents (in parenthesis) are listed for general information only. FIGURE 1. Configuration and dimensions
8、. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59742 TABLE I. Electrical characteristics. CID dash number AA59742- L 20% (H) DCR Max (Ohms) SRF typ (MHz) Isat (A) Irms (A rms) 001 1.0 .05 130 2.90 2.9 002 1.5 .05 115 2.60 2.8 003 2.2 .07 90
9、2.30 2.4 004 3.3 .08 70 2.00 2.0 005 4.7 .09 50 1.50 1.5 006 6.8 .13 45 1.20 1.4 007 10 .16 35 1.10 1.1 008 15 .23 30 0.90 1.2 009 22 .37 20 0.70 0.8 010 33 .51 15 0.58 0.6 011 47 .64 14 0.50 0.5 012 68 .86 11 0.40 0.4 013 100 1.27 9 0.31 0.3 014 150 2.00 6 0.27 0.25 015 220 3.11 5.5 0.22 0.2 016 33
10、0 3.80 5 0.18 0.16 017 470 5.06 4 0.16 0.15 018 680 9.20 3 0.14 0.12 019 1000 13.8 2 0.10 0.07 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR
11、). 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market
12、. The Government reserves the right to require proof of such conformance. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59742 5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of the product
13、 to be provided under this CID: a. The company producing the item must have been producing a product meeting the requirements of this CID for at least 2 years. b. The company must have sold 1,000 units meeting this CID in the commercial marketplace over the past 2 years. 6. PACKAGING. Preservation,
14、packing, and marking shall be as specified in the contract or order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory cont
15、rol, and submission of these inductors to DSCC under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.3 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conformance prov
16、isions. c. Packaging requirements. 7.4 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordination, these manufacturers were known to have commercial product
17、s that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 02113 Coilcraft Inc 1102 Silver Lake Road Cary, Illinois 60013-165
18、8 Phone number (847) 639-2361 Uniform Resource Locator (URL): 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59742 7.5 Part number (P/N) supersession data. This CID supersedes the following manufacturers P/Ns as shown. This information is bei
19、ng provided to assist in reducing proliferation in the government inventory system. TABLE II. P/N supersession data. CID dash number (see table I) AA59742- Vendor commercial PIN CAGE 02113 1/ 001 DO1608C-102 002 DO1608C-152003 DO1608C-222 004 DO1608C-332005 DO1608C-472 006 DO1608C-682007 DO1608C-103
20、 008 DO1608C-153009 DO1608C-223 010 DO1608C-333011 DO1608C-473 012 DO1608C-683013 DO1608C-104 014 DO1608C-154015 DO1608C-224 016 DO1608C-334017 DO1608C-474 018 DO1608C-684019 DO1608C-105 1/ The manufacturers P/N shall not be used for procurement to the requirements of this CID. At the time of prepar
21、ation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. 7.6 Government users. To acquire information on obtaining these inductors from the Government inventory system, contact Defense Supply Center, Columbus, ATTN: DSCC-CPAA, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-7741. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE Custodians: Navy - EC Preparing Activity: DLA - CC Project 5950-1158 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
