1、A-A-55189 W 9999974 0343320 882 I INCH-POUND I A-A-5 5 18 9 25 MARCH 1993 COMMERCIAL ITEM DESCRIPTION SKIRT, MATERNITY The General Services Administration has authorized the use of this Commercial Item Description in preference to MIL-S-29376. ABSTRACT Abstract. wool maternity skirt intended for wea
2、r by female personnel of the US Marine Corps. The skirt shall be one type of olive green polyester Classification. sizes: The skirt shall be provided in the following EXTRA-SMALL (4-6) SMALL (8-10) MEDIUM (12-14 ) LARGE (16-18) NOTE: The sizes (EXTRA-SMALL, SMALL, MEDIUM, LARGE), may be abbreviated
3、as XSM, SM, MED and LG. SALIENT CHARACTERISTICS General description. The skirt shall consist of a three piece skirt and a full elastic waistband, which has a one piece front with a knitted nylon cloth stretch panel inserted across the upper front and a two piece back with waist darts. The skirt shal
4、l be unhemmed. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 1910
5、1-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 8410 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitt
6、ed without license from IHS-,-,-A-A-55149 m 9999974 0343321 719 m A-A-5 5 18 9 Y Material. Basic cloth. The cloth for the basic material shall be a serge, polyester/wool, Green Shade 2243, two up and two down right hand twill, conforming to the following: Characteristic Requirement Test Method Fiber
7、 Content % Polyester % Wool (minimum) pH Value Weight (linear yards, based on 56 inch width basis ) Yarns Per Inch (minimum) Warp Filling Breaking Strength (Grab Method) (pounds, minimum) Warp Filling Tearing Strength (pounds, minimum) Warp Filling Dimensional Stability (maximum) Warp Filling Colorf
8、astness to: (minimum) Light Wet-dry cleaning Perspiration Crocking ASTM-D 629 77% to 83% 17% 5.5 to 8.5 ASTM-D 2165 10.5 to 11.0 ASTM-D 3776 (Option C) ASTM-D 3775 65 55 ASTM-D 5034 160 140 ASTM-D 1424 6.0 6.0 AATCC 135 2.5% 2.5% Class 4 Class 4 Class 4 Grade 3 AATCC 16, 16A AATCC 132 AATCC 15 AATCC
9、 8 Knitted cloth. The cloth for the front stretch panel shall be a interlock knitted, tubular, stretch type nylon cloth conforming to Green Shade 2245. The cloth shall weigh 6.5 to 8.0 ounces per square yard when tested according to test method ASTM-D 3776, (Option C), and have a minimum of 30 wale
10、yarns per inch and 35 courses per inch when tested according to test method ASTM-D 3887. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55L9 = 9999974 0343322 655 A-A-55 189 Elastic waistband stabilizer. The elastic waistband stabilizer shall
11、be Ban-Rol XL 90 or equal and shall be 12 1/16 inches in width. Finishina tape. The tape for finishing the bottom of the skirt shall be a rayon, textile, flat weave tape, having a width of either 1/2 2 1/16 inch; 9/16 2 1/32 inch; 1-1/8 2 1/32 inch; or 1-1/4 2 1/32 inch. except for the 1-1/4 inch ta
12、pe which can also be a 2 up and 2 down herringbone twill weave, with one reversal of twill in the center of the tape. Olive Drab, Shade T-1, Cable No. 66023 of DoD Standard Color Card of Official Standardized Shades for Sewing Threads 1968. Thread. The thread for stitching seams shall be a 3 ply, Si
13、ze 50, soft finish machine thread cotton, averaging 11,023 to 12,400 yards per pound when tested as specified according to test method ASTM-D 1907. The thread for overedge stitching shall be a 3 ply, Size 70, soft finish machine thread cotton, averaging 14,173 to 16,535 yards per pound when tested a
14、s specified according to test method ASTM-D 1907. The color of the thread shall be Olive Drab, Shade T-1, Cable No. 66023, of DoD Standard Color Card of Official Standardized Shades for Sewing Threads 1968. The weave shall be plain, 1 up and 1 down, The color of the tape shall closely match Finished
15、 measurements. The finished skirts shall conform to the following - All measurements and tolerances are expressed in inches: Size (Dl (A-A) Length Waistband (Cl Hips (BI Waist (Al Waist Relaxed Stretched _ EXTRA-SMALL 24 29 39 29-1/2 1-1/4 SMALL 25 31 41 30 1-1-4 MEDIUM 26 34 44 30-1/2 1-1/4 LARGE 2
16、7 37-1/2 47-1/2 31 1-1/4 TOLERANCE - + 1/2 - + 1/2 - + 1/2 - + 1/2 - + 1/8 NOTE: All measurements shall be taken with skirt smooth and flat. A, B, C and D refer to locations on Figure 1. (A-B) Waist - Twice the measurement taken in center of Hips - Twice the measurement taken on the skirt waistband
17、from folded edge to folded edge. 7 inches down from top edge of waistband from folded edge to folded edge. Length - Measurement taken at center back from top edge of waistband to bottom edge of unhemmed skirt. (Cl (Dl 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without lic
18、ense from IHS-,-,-A-A-55189 m 9999974 0143323 591 m A-A-55 18 9 Label/markinq. A commercial type white non-woven material label shall be used. The basic cloth shall consist of either spunbonded polyester made from 4.0 denier (.44 Tex) continuous filament white polyester fiber or 80/20 polyester/cell
19、ulose material, impregnated and coated with a permanent pigmented acrylic or nitrocellulose composition affixed by an appropriate acrylic or nitrocellulose resin. The label shall show a minimum of Class 4 - Colorfastness to Accelerated Laundering Transference (Wool), when tested as specified accordi
20、ng to test method AATCC 61, Test 1A. The inscription shall be as follows: SKIRT, WOMENS MATERNITY FIBER CONTENT: Polyester (80%) and Wool (20%) ( EXAMPLE ) SIZE: SMALL ( EXAMPLE ) STOCK NO: 8410-00-000-0000 ( EXAMPLE ) NAME OF CONTRACTOR: IS DESIRED, USE COOL IRON. WASH DARKS SEPARATELY. DO NOT BLEA
21、CH. CONTRACT NO.: DOT-CG-00000-0 (EXAMPLE) MACHINE WASH: WARM. LINE OR TUMBLE DRY. IF TOUCH-UP Patterns. The government shall furnish a single size pattern. The contractor is responsible for grading patterns for additional sizes. The pattern generally provides for a seam allowance of 3 inches for he
22、mming the bottom of the skirt and a 5/8 inch seam allowance for all seams. Commercial patterns may be used in lieu of the government furnished pattern provided they conform to the cited design and finished measurements. Workmanship. After completion, the finished skirt shall be thoroughly cleaned, a
23、nd all loose thread, lint, and foreign matter removed. The entire skirt shall be pressed smooth with heated pressing iron or pressing machine. Press marks and gloss shall be removed. Product demonstration model. When required, offerors shall submit samples of their intended production. The product d
24、emonstration model will consist of units independently developed. Product demonstration models will be analyzed and evaluated by the government. Evaluation criteria and basis for award are contained in the solicitation. Product demonstration models will be retained by the government. One (1) product
25、 demonstration model approved by DPSC under the resultant contract will serve as a manufacturing standard for the corresponding production items delivered under this contract. Offerors are advised that the product demonstration model does not relieve the successful offerer of his responsibility to p
26、erform in accordance with the Commercial Item Description specified above. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55189 = 9999974 0143324 428 = A-A- 5 5 18 9 QUALITY ASSURANCE Certification. The contractor shall certify that the produc
27、t offered meets the salient characteristics of this description and that the product conforms to the producers own drawings, specifications, standards and quality assurance practices. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as
28、 may be otherwise provided for, under the provisions of the contract. Reliance on contractor Quality Assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the government for acceptance comply with all requirements of the contr
29、act. Visual examination. Sampling and examination of the end item shall be performed for dress (d) skirts in accordance with the provisions of MIL-STD-1609 - Provisions For Evaluating Quality Of Womens Skirts. Dimensional Examination. The dimensional examination provisions for the finished skirts sh
30、all be as listed in the Finished measurements paragraph contained in this Commercial Item Description and as specified in MIL-STD-1609 - Provisions For Evaluating Quality Of Womens Skirts. Packaqinq Examination. The examination for compliance with packaging, packing and marking requirements shall be
31、 as specified in MIL-STD-1609 - Provisions For Evaluating Quality Of Womens Skirts. Requlatorv Requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. PACKAGING Preservation, Packinq, and Markinq. The prese
32、rvation, packing, and marking shall be as specified in the contract or order. NOTES Standard sample. For information and access regarding the availability of standard samples of shades specified, address inquiry to the procuring activity issuing the invitation for bids. 5 Provided by IHSNot for Resa
33、leNo reproduction or networking permitted without license from IHS-,-,-A-A-55Lq = 9999974 0143325 364 A-A-5 5 18 9 Source of Government documents. Copies of Military and Federal documents are available from: Standardization Documents Order Desk Building 4D 700 Robbins Avenue Philadelphia, PA 19111-5
34、094 Copies of Department of Defense (DoD) Standard Color Card of Official Standardized Shades for Sewing Threads, 1968 - Application for copies should be addressed to: Color Association of the United States, Incorporated 343 Lexington Avenue New York, NY 10016-0927 Sources of Non-qovernment document
35、s. ASTM Test Methods - Application for copies should be addressed to: American Society for Testing and Materials 1916 Race Street Philadelphia, PA 19103-1187 AATCC Test Methods - Application for copies should be addressed to: American Association of Textile Chemists and Colorists P.O. Box 12215 Tria
36、ngle Park, NC 27709-2215 Review Activity: NAVY-MC Civil Agency Coordinating Activity : GSA-FSS Preparing Activity: DLA-CT Project No. 8410-0815 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55189 9999974 0143326 2TO W A-A-55189 NOQ - FRONT rA 8ACK BASIC YATERIAL ir. .- - WAl8TBAND 8fCtlON A-A FIGURE 1:SKIRT ,WOMENS MATERNITY 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
