1、February 2015 Translation by DIN-Sprachendienst.English price group 9No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 25.100.01; 25.060.20!%?cN“2286443www.din.deDDIN ISO 5610-8Tool holders with rectangular shank for indexable inserts Part 8: Style K (ISO 5610-8:2014),English translation of DIN ISO 5610-8:2015-02Klemmhalter mit Vierkantschaft fr Wendeschneidplatten Teil 8: Form K (ISO 5610-8:2014),Englische berset
3、zung von DIN ISO 5610-8:2015-02Porte-plaquette queue rectangulaire pour plaquettes amovibles Partie 8: Forme K (ISO 5610-8:2014),Traduction anglaise de DIN ISO 5610-8:2015-02SupersedesDIN 4984-8:1987-06www.beuth.deDocument comprises 12 pagesIn case of doubt, the German-language original shall be con
4、sidered authoritative.01.15A comma is used as the decimal marker. Contents Page National foreword 3 National Annex NA (informative) Bibliography . 4 1 Scope 5 2 Normative references 5 3 Dimensions 5 3.1 General 5 3.2 Tool holder style K for rhombic indexable insert shape C . 6 3.3 Tool holder style
5、K for square indexable insert shape S 7 4 Designation . 9 5 Material . 10 6 Design . 10 6.1 Type of mounting 10 6.2 Corner radius, r. 10 6.3 Thickness, s, of indexable insert . 11 7 Extent of delivery . 11 8 Marking . 11 Bibliography . 12 2DIN ISO 5610-8:2015-02 National foreword This document (EN I
6、SO 5610-8:2014) has been prepared by Technical Committee ISO/TC 29 “Small tools”, Subcommittee SC 9 “Tools with defined cutting edges, cutting items” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Werkzeuge und Spannzeuge (DIN Standar
7、ds Committee Tools and Clamping Devices), Working Committee NA 121-01-12 AA Dreh- und Bohrwerkzeuge mit Wendeschneidplatten aus harten Schneidstoffen. This is the first edition of the DIN ISO 5610 series, and replaces the DIN 4984 series, which was the basis for this series of International Standard
8、s. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN and/or DKE shall not be held responsible for identifying any or all such patent rights. DIN ISO 5610 consists of the following parts, under the general title Tool holders with
9、 rectangular shank for indexable inserts: Part 1: General survey, correlation and determination of dimensions Part 2: Style A Part 3: Style B Part 4: Style D Part 5: Style F Part 6: Style G Part 7: Style J Part 8: Style K Part 9: Style L Part 10: Style N Part 11: Style R Part 12: Style S Part 13: St
10、yle T Part 14: Style H Part 15: Style V The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 6987 DIN ISO 6987 Amendments This standard differs from DIN 4984-8:1987-06 as follows: a) the text of the International Standard has been adopted witho
11、ut any modification. Previous editions DIN 4984-8: 1980-04, 1987-06 DIN ISO 5610-8:2015-02 3National Annex NA (informative) Bibliography DIN 4000-1, Tabular layouts of properties Part 1: Concepts and principles DIN 4000-76, Tabular layouts of properties Part 76: Inserts, indexable DIN 4000-77, Tabul
12、ar layouts of properties Part 77: Inserts, clamped, for grooving, parting and thread machining DIN 4000-90, Tabular layouts of properties Part 90: Tool holders for indexable inserts DIN 4967-1, Indexable hardmetal inserts with rounded corners, with partly cylindrical hole 7 normal clearance DIN 4967
13、-2, Indexable hardmetal inserts with rounded corners, with partly cylindrical hole 11 normal clearance DIN 4968, Indexable hardmetal inserts with rounded corners, without fixation hole DIN 4969-1, Ceramic indexable inserts, with rounded corners, without fixing hole DIN 4983, Tool holders with rectan
14、gular shank and cartridges for indexable inserts Presentation of the designation DIN 4988, Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole DIN 6580, Terminology of chip removing Movements and geometry of the chip removing process DIN 6581, Terminology of chip removin
15、g Reference systems and angles on the cutting part of the tool DIN 6582, Terminology of cutting Additional terms for the tool, wedge and the cutting edge DIN 6584, Terms of the cutting technique Forces, energy, work, power DIN ISO 6987, Indexable hard material inserts with rounded corners, with part
16、ly cylindrical fixing hole Dimensions ISO/TS 13399-201, Cutting tool data representation and exchange Part 201: Creation and exchange of 3D models Regular inserts ISO/TS 13399-202, Cutting tool data representation and exchange Part 202: Creation and exchange of 3D models Irregular inserts DIN ISO 56
17、10-8:2015-02 4Tool holders with rectangular shank for indexable inserts Part 8: Style K1 ScopeThis part of ISO 5610 specifies tool holders with rectangular shank, style K, i.e. with offset shank and cutting edge angle r= 75 for end cutting.These tool holders are primarily intended for indexable inse
18、rts made of hard metal or other cutting materials to be mounted by clamping and to be used for turning operations.NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are gi
19、ven in ISO 5610-1:2014, Table A.1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen
20、ced document (including any amendments) applies.ISO 5608:2012, Turning and copying tool holders and cartridges for indexable inserts DesignationISO 5610-1:2014, Tool holders with rectangular shank for indexable inserts Part 1: General survey, correlation and determination of dimensions3 Dimensions3.
21、1 GeneralIt is not necessary for tool holders to comply with the pictorial representation; only the dimensions given shall be observed.For determination of dimensions h1, f, and l1, see ISO 5610-1.For explanation of the designation code for tool holders, see ISO 5608.NOTE The values of rake angles a
22、nd inclination angles shown in the figures are recommended values; they can vary according to the application.DIN ISO 5610-8:2015-02 53.2 Tool holder style K for rhombic indexable insert shape CKeyaInclination angle, s.bRake angle, o.NOTE This figure shows a right-hand tool holder (R); left-hand too
23、l holder (L) laterally reversed.Figure 1 Tool holder style K for rhombic indexable insert CTable 1Dimensions in millimetresSymbolah1js13bh13l3af+050,h2h13l1ak16l2max.sbSCKCR 0808 068 8 6,4 1,6 10 8 12 2,38SCKCL 0808 06SCKCR 1010 0610 10 6,4 1,6 12 10 12 2,38SCKCL 1010 06aFor the selection of length
24、l1, the dash can be replaced by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.DIN ISO 5610-8:2015-02 63.3 Tool holder style K for square indexable insert shape SKeyaInclination angl
25、e, s.bRake angle, o.NOTE This figure shows a right-hand tool holder (R); left-hand tool holder (L) laterally reversed.Figure 2 Tool holder style K for square indexable insert SDIN ISO 5610-8:2015-02 7Table 2Dimensions in millimetresSymbolah1js13bh13l3af+050,h2h13l1ak16l2max.sbSSKCR 1212 0912 12 9,52
26、 2,2 16 12 323,97SSKCL 1212 09PSKNR 1212 093,18PSKNL 1212 09CSKPR 1212 09CSKPL 1212 09SSKCR 1616 0916 16 9,52 2,2 20 16 323,97SSKCL 1616 09PSKNR 1616 093,18PSKNL 1616 09CSKPR 1616 09CSKPL 1616 09SSKCR 1616 1216 16 12,7 3,1 20 16 364,76SSKCL 1616 12PSKNR 1616 12PSKNL 1616 12CSKPR 1616 123,18CSKPL 161
27、6 12SSKCR 2020 1220 20 12,7 3,1 25 20 364,76SSKCL 2020 12PSKNR 2020 12PSKNL 2020 12CSKPR 2020 123,18CSKPL 2020 12SSKCR 2525 1225 25 12,7 3,9 32 25 364,76SSKCL 2525 12PSKNR 2525 12PSKNL 2525 12CSKPR 2525 123,18CSKPL 2525 12SSKCR 2525 1525 25 15,88 4,6 32 25 405,56SSKCL 2525 15PSKNR 2525 156,35PSKNL 2
28、525 15aFor the selection of length l1, the dash can be replaced by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.DIN ISO 5610-8:2015-02 8Symbolah1js13bh13l3af+050,h2h13l1ak16l2max.s
29、bCSKPR 2525 1925 25 19,05 4,6 32 25 45 4,76CSKPL 2525 19SSKCR 3225 1232 25 12,7 3,9 32 32 364,76SSKCL 3225 12PSKNR 3225 12PSKNL 3225 12CSKPR 3225 123,18CSKPL 3225 12SSKCR 3225 1532 25 15,88 4,6 32 32 405,56SSKCL 3225 15PSKNR 3225 156,35PSKNL 3225 15CSKPR 3225 1932 25 19,05 4,6 32 32 45 4,76CSKPL 322
30、5 19SSKCR 3232 1932 32 19,05 4,6 40 32 456,35SSKCL 3232 19PSKNR 3232 19PSKNL 3232 19CSKPR 3232 194,76CSKPL 3232 19SSKCR 4040 1940 40 19,05 4,6 50 40 456,35SSKCL 4040 19PSKNR 4040 19PSKNL 4040 19CSKPR 4040 194,76CSKPL 4040 19PSKNR 4040 2540 40 25,4 5,9 50 40 50 7,94PSKNL 4040 25aFor the selection of
31、length l1, the dash can be replaced by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.4 DesignationA tool holder in accordance with this part of ISO 5610 shall be designated by the f
32、ollowing:a) “Tool holder”;b) a reference to this part of ISO 5610 (i.e. ISO 5610-8);c) type of mounting, in accordance with ISO 5608;d) symbol for indexable insert shape, in accordance with ISO 5608;Table 2DIN ISO 5610-8:2015-02 9e) symbol for tool style, in accordance with ISO 5608;f) symbol for th
33、e indexable insert normal clearance, in accordance with ISO 5608;g) symbol for hand of tool, in accordance with ISO 5608;h) its height, h1, width, b, and length, l1(symbol for tool length in accordance with ISO 5608);i) its cutting edge length, l3.EXAMPLE 1 Tool holder for a screw-clamped (S) rhombi
34、c indexable insert shape C (C), tool holder style K (K), for normal clearance of indexable insert n= 7 (C), right-hand type (R), with height h1= 10 mm and width b = 10 mm (1010), length l1= 70 mm (E), for cutting edge length l3= 6,4 mm (06) is designated as follows:Tool holder ISO 5610-8 - SCKCR 101
35、0 E06EXAMPLE 2 Tool holder for a horizontally mounted, top-clamped (C) square indexable insert shape S (S), tool holder style K (K), normal clearance of indexable insert n= 11 (P), right-hand type (R), with height h1= 32 mm and width b = 25 mm (3225), length l1= 170 mm (P), for cutting edge length l
36、3= 19,05 mm (19) is designated as follows:Tool holder ISO 5610-8 - CSKPR 3225 P195 MaterialThe material should be steel with a tensile strength of at least 1 200 N/mm2.6 Design6.1 Type of mountingStandard design of tool holders with indexable insert shall be mounted in accordance with Tables 1 and 2
37、.Other types of mounting are at the manufacturers discretion or upon agreement. The letter symbol in the designation, symbol 1, shall then be replaced by the respective symbol for the chosen or agreed-upon type of mounting in accordance with ISO 5608.For the modified type of mounting deviating from
38、Tables 1 and 2, the relevant indexable insert thickness shall also be considered.6.2 Corner radius, rTool holders in accordance with this part of ISO 5610 can be equipped with indexable inserts with cutting edge length, l3, as specified in Tables 1 and 2, and any corner radius, r.The values for l1gi
39、ven in ISO 5610-1:2014, Table 2, apply to tool holders with indexable inserts having corner radii, r, in accordance with Table 3.Table 3Dimensions in millimetresl3r6,4 0,49,520,812,7NOTE The values given for rare nominal values. The accurate values converted from the inch dimensions are 0,397 mm, 0,
40、794 mm, 1,191 mm, and 2,381 mm.DIN ISO 5610-8:2015-02 10l3r15,881,219,0525,4 2,4NOTE The values given for rare nominal values. The accurate values converted from the inch dimensions are 0,397 mm, 0,794 mm, 1,191 mm, and 2,381 mm.For indexable inserts with corner radii, r, other than those specified
41、in Table 3, the dimensions of a, f, and l1shall be determined in accordance with ISO 5610-1.The tolerances for h1, f, and l1refer to dimensions measured with master indexable insert and master shim, if applicable.6.3 Thickness, s, of indexable insertThe values for thickness, s, given in Tables 1 and
42、 2, apply to indexable inserts without shim and for the standard design of tool holders.For tool holders for indexable inserts with thicknesses deviating from the specified values, the thickness shall be indicated when ordering or upon delivery (in the handbook).7 Extent of deliveryTool holders shal
43、l be delivered complete with clamping device, but without indexable insert(s).8 MarkingTool holders shall be marked with the letter symbol and the name or trademark of the manufacturer.Additional marking is at the manufacturers discretion or upon agreement.Deviations in marking may be by mutual agre
44、ement.A reference to this part of ISO 5610, i.e. ISO 5610-8:2014, shall be given on the packaging.Table 3DIN ISO 5610-8:2015-02 11Bibliography1 ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole Dimensions2 ISO 3002-1, Basic quantities in cutting and grinding Pa
45、rt 1: Geometry of the active part of cutting tools General terms, reference systems, tool and working angles, chip breakers3 ISO 3364, Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole Dimensions4 ISO 6987, Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole Dimensions5 ISO/TS 13399-2, Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items6 ISO/TS 13399-3, Cutting tool data representation and exchange Part 3: Reference dictionary for tool itemsDIN ISO 5610-8:2015-02 12
