1、December 2015 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 01.040.11; 11.040.70!%Ir)“23879
2、06www.din.deDIN EN ISO 8624Ophthalmic optics Spectacle frames Measuring system and terminology (ISO 8624:2011 + Amd.1:2015);English version EN ISO 8624:2011 + A1:2015),English translation of DIN EN ISO 8624:2015-12Augenoptik Brillenfassungen Masystem und Begriffe (ISO 8624:2011 + Amd.1:2015);Englisc
3、he Fassung EN ISO 8624:2011 + A1:2015),Englische bersetzung von DIN EN ISO 8624:2015-12Optique ophtalmique Montures de lunettes Systme de mesure et terminologie (ISO 8624:2011 + Amd.1:2015);Version anglaise EN ISO 8624:2011 + A1:2015),Traduction anglaise de DIN EN ISO 8624:2015-12SupersedesDIN EN IS
4、O 8624:2011-05www.beuth.deDocument comprises 18 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.15DIN EN ISO 8624:2015-12 2 A comma is used as the decimal marker. National foreword This document (EN ISO 8624:2011 + A1:2015)
5、has been prepared by Technical Committee ISO/TC 172/SC 7 “Ophthalmic optics and instruments” in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” (both secretariats are held by DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Feinmech
6、anik und Optik (DIN Standards Committee Optics and Precision Mechanics), Working Committee NA 027-01-08 AA Augenoptik, Working Group Brillenfassungen. This document is the consolidated version of EN ISO 8624:2011. It incorporates Amendment A1:2015 (EN ISO 8624:2011/A1:2015). The start and finish of
7、text introduced or altered by amendment is indicated in the text by tags !“. This standard specifies a measuring system for spectacle frames and related terminology. It is applicable to fronts which are intended to be symmetrical. It should be noted that the terminology contained in DIN EN ISO 8624
8、is limited to that which pertains to the topic of measuring systems for spectacle frames. A comprehensive set of vocabulary related to spectacle frames and their individual components can be found in DIN EN ISO 7998. An extensive set of vocabulary related to spectacle lenses, including fitting lense
9、s into spectacle frames can be found in DIN EN ISO 13666. Vocabulary pertaining to sunglasses can be found in DIN EN ISO 4007. Refer to the Bibliography. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 4007 DIN EN ISO 4007 ISO 7998 DIN
10、EN ISO 7998 ISO 13666 DIN EN ISO 13666 Amendments This standard differs from DIN EN ISO 8624:2011-05 as follows: a) the definition of “frame pantoscopic angle” has been supplemented and additional explanations on the term have been added (see A.14 and Figure A.5); b) Amendment ISO 8624:2011/Amd.1:20
11、15 (EN ISO 8624:2011/A1:2015) has been incorporated. Previous editions DIN 58200: 1961-04, 1965-05, 1986-09 DIN EN ISO 8624: 1996-08, 2002-06, 2011-05 DIN EN ISO 8624:2015-12 3 National Annex NA (informative) Bibliography DIN EN ISO 4007, Personal protective equipment Eye and face protection Vocabul
12、ary DIN EN ISO 7998, Ophthalmic optics Spectacle frames Lists of equivalent terms and vocabulary DIN EN ISO 11380, Optics and optical instruments Ophthalmic optics Formers DIN EN ISO 11381, Optics and optical instruments Ophthalmic optics Screw threads DIN EN ISO 12870, Ophthalmic optics Spectacle f
13、rames Requirements and test methods DIN EN ISO 13666, Ophthalmic optics Spectacle lenses Vocabulary DIN EN ISO 8624:2015-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8624 Februar 2011 + A1 August 2015 ICS 11.040.70 English Version Ophthalmic optics S
14、pectacle frames Measuring system and terminology (ISO 8624:2011 + Amd.1:2015) Optique ophtalmique Montures de lunettes Systme de mesure et terminologie (ISO 8624:2011 + Amd.1:2015) Augenoptik Brillenfassungen Masystem und Begriffe (ISO 8624:2011 + Amd.1:2015) EN ISO 8624:2011 was approved by CEN on
15、2011-02-05 and Amendment A1:2015 on 2015-06-20. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern
16、ing such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into
17、its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ger
18、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE F
19、R NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8624:2011 + A1:2015 EContents Page Foreword to EN ISO 8624:2011 3!European foreword to EN ISO 8624:2011/A1:2015
20、 . .4.1 Scope 52 Terms, definitions and symbols .53 Measuring system 6Annex A (informative) Complementary terms and definitions .9Bibliography 142EN ISO 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 Foreword to EN ISO 8624:2011 This document (EN ISO 8624:2011) has been prepared by Technical Commit
21、tee ISO/TC 172 “Optics and photonics” in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
22、 by August 2011, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such
23、patent rights. This document supersedes EN ISO 8624:2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, F
24、inland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 8624:2011 has been approved by CEN as EN
25、ISO 8624:2011 without any modification. 3EN ISO 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 !European foreword to EN ISO 8624:2011/A1:2015 This document (EN ISO 8624:2011/A1:2015) has been prepared by Technical Committee ISO/TC 172 “Optics and photonics” in collaboration with Technical Committee
26、 CEN/TC 170 “Ophthalmic optics” the secretariat of which is held by DIN. This Amendment to the European Standard EN ISO 8624:2011 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016, and conflicting national s
27、tandards shall be withdrawn at the latest by February 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENEL
28、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice
29、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 8624:2011/Amd.1:2015 has been approved by CEN as EN ISO 8624:2011/A1:2015 with
30、out any modification. “ 4EN ISO 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 1 Scope This International Standard specifies a measuring system for spectacle frames and related terminology. It is applicable to fronts which are intended to be symmetrical. 2 Terms, definitions and symbols For the pur
31、poses of this document, the following terms, definitions and symbols apply. For complementary terms and definitions, see Annex A. 2.1 boxed centre C intersection of the horizontal centreline (A.1) and vertical centreline (A.2) of the rectangular box which circumscribes the lens shape (A.10) See Figu
32、re 1. 2.2 horizontal boxed lens size horizontal lens size a distance between the vertical sides of the rectangular box which circumscribes the lens shape (A.10) See Figure 1. NOTE For spectacle frames having a significant face form angle (A.13), the horizontal boxed lens size shall be measured in th
33、e “plane” of the individual lens shape. 2.3 vertical boxed lens size vertical lens size b distance between the horizontal sides of the rectangular box which circumscribes the lens shape (A.10) See Figure 1. 2.4 boxed centre distance distance between centres c distance between the boxed centres (2.1)
34、 See Figure 1. 5EN ISO 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 NOTE For spectacle frames having a significant face form angle (A.13), the boxed centre distance shall be measured between the boxed centres (2.1) marked on the back surfaces of lenses of appropriate base curve fitted to the fram
35、e. See Figure 4. 2.5 distance between lenses d horizontal distance between the nasal vertical sides of the rectangular boxes which circumscribe the right and left lens shapes (A.10) See Figure 1. NOTE Former users of the obsolete datum system should note that this is the datum measurement “minimum b
36、etween lenses”. 2.6 overall length of side l length from the intersection of the dowel screws axis with the median plane of the joint to the end of the side and parallel to the centreline of it, the drop having been straightened See Figure 2. NOTE For sides without a joint, the side should be held o
37、pen at (0590) to the front or to that part of the side that is intended to be attached to the front, and the length measurement is from the end of the side to the front less 10 mm. See Figure 3. 3 Measuring system The measuring system for spectacle frames shall be in accordance with Figures 1 to 4,
38、as defined in Clause 2. If codes are used in spectacle frame documentation, the symbols given for the terms defined in Clause 2 shall be employed. The measuring system comprises several horizontal and vertical dimensions and reference points. The knowledge of these is necessary for the manufacturing
39、, ordering and adjustment of spectacle frames as well as for the exact mounting of spectacle lenses into spectacle frames. The measuring system is based on the boxed lens (boxing) system, which uses a rectangle tangential to the lens shape as the basis for the determination of the dimensions of the
40、spectacle front. The upper tangent is common to both lens shapes and shall be regarded as horizontal, except in the case of spectacle frames having a significant face form angle, for which the line touching the uppermost edges of the right and left lens shapes shall be regarded as horizontal. 6EN IS
41、O 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 Key C boxed centre a horizontal lens size b vertical lens size c boxed centre distance d distance between lenses Figure 1 Measurements related to spectacle frames Spectacle fronts Key 1 axis of hinge or dowel screw axis 2 median plane of joint 3 cent
42、reline of side 4 length to bend (see Annex A) 5 length of drop (see Annex A) l overall length of side Figure 2 Measurements related to spectacle frames Spectacle sides 7EN ISO 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 Dimensions in millimetres Key l overall length of side Figure 3 Measurement
43、of overall length of side for sides without a joint Key C boxed centre c boxed centre distance Figure 4 Measurement of boxed centre distance in frame having significant face form angle 8EN ISO 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 Annex A (informative) Complementary terms and definitions A
44、lthough the terms defined in this annex are not an integral part of the boxed lens system, they are frequently used in relation to lens shape or spectacle frames. A.1 horizontal centreline line located at an equal distance from the two horizontal tangents of the boxed lens (boxing) system See Figure
45、s A.1 and A.2. A.2 vertical centreline line located at an equal distance from the vertical sides of the rectangular box which circumscribes the lens shape (A.10) See Figure A.1. A.3 vertical symmetry axis line located at equal distance from the nasal vertical sides of the rectangular boxes which cir
46、cumscribe the right and left spectacle lens shapes (A.10) See Figure A.1. A.4 bridge width line reference line for bridge measurements positioned 5 mm below the horizontal centreline (A.1) See Figures A.1 and A.2. A.5 bridge width minimum distance between the rims measured along the bridge width lin
47、e (A.4) See Figures A.1 and A.2. NOTE For spectacle frames with adjustable pads, bridge width applies to the rims, not the pads; for rimless spectacles, it applies to the minimum distance between the nasal edges of the spectacle lenses measured along the bridge width line. A.6 bridge height distance
48、 from the bridge width line (A.4) to the lower edge of the bridge, measured along the vertical symmetry axis (A.3) See Figure A.1. A.7 length to bend length from the intersection of the dowel axis with the median plane of the joint to the intersection point of the axis of the tip and side, measured
49、along the axis of the side 9EN ISO 8624:2011 + A1:2015 (E) DIN EN ISO 8624:2015-12 See Figure 2. A.8 length of drop length from the intersection point of the axes of the side and tip to the end of the side See Figure 2. A.9 effective diameter diameter of the smallest circular uncut lens that can be glazed to the lens shape (A.10) with its geometrical centre positioned at the boxed centre (2.1) See Figure A.3. NOTE This includes an allowance for edging. A.10 lens shape outline of the lens periphery with the n
