1、May 2013 Translation by DIN-Sprachendienst.English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 21.
2、060.20!%#C“2006132www.din.deDDIN EN ISO 10512Prevailing torque type hexagon regular nuts (with non-metallic insert)with metric fine pitch thread Property classes 6, 8 and 10 (ISO 10512:2012);English version EN ISO 10512:2012,English translation of DIN EN ISO 10512:2013-05Sechskantmuttern mit Klemmte
3、il (mit nichtmetallischem Einsatz) mit metrischemFeingewinde Festigkeitsklassen 6, 8 und 10 (ISO 10512:2012);Englische Fassung EN ISO 10512:2012,Englische bersetzung von DIN EN ISO 10512:2013-05crous hexagonaux normaux autofreins ( anneau non mtallique) filetage mtrique pas fin Classes de qualit 6,
4、8 et 10 (ISO 10512:2012);Version anglaise EN ISO 10512:2012,Traduction anglaise de DIN EN ISO 10512:2013-05SupersedesDIN EN ISO 10512:1998-02www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 11 pages04.13 DIN EN ISO 10512:2013-05 2 A comm
5、a is used as the decimal marker. National foreword This document (EN ISO 10512:2012) has been prepared by Technical Committee ISO/TC 2 “Fasteners” in collaboration with Technical Committee CEN/TC 185 “Fasteners” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was
6、 the Normenausschuss Mechanische Verbindungs-elemente (Fasteners Standards Committee), Working Committee NA 067-00-03 AA Verbindungselemente mit metrischem Innengewinde. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 225 DIN EN ISO 225
7、 ISO 261 DIN ISO 261 ISO 724 DIN ISO 724 ISO 898-2 DIN EN ISO 898-2 ISO 965-2 DIN ISO 965-2 ISO 2320 DIN EN ISO 2320 ISO 3269 DIN EN ISO 3269 ISO 4042 DIN EN ISO 4042 ISO 4759-1 DIN EN ISO 4759-1 ISO 6157-2 DIN EN ISO 6157-2 ISO 8673 DIN EN ISO 8673 ISO 8992 DIN ISO 8992 ISO 10683 DIN EN ISO 10683 A
8、mendments This standard differs from DIN EN ISO 10512:1998-02 as follows: a) normative references are now undated; b) in Table 2, requirements for zinc flake coatings have been added; c) Table 2 has been brought in line with the new edition of DIN EN ISO 898-2; d) in Clause 5, the designation has be
9、en harmonized with the original ISO document; e) the standard has been editorially revised and normative references have been updated; f) previous editions have been updated and supplemented by reference to DIN 985. Previous editions DIN 985: 1951-07, 1956-06, 1960-10, 1963-03, 1967-12, 1977-09, 198
10、7-05 DIN 982: 1967-12, 1977-09, 1987-05 DIN 6924: 1983-11, 1987-07 DIN EN ISO 10512: 1998-02 DIN EN ISO 10512:2013-05 3 National Annex NA (informative) Bibliography DIN EN ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions DIN EN ISO 898-2, Mechanical properties
11、of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch DIN EN ISO 2320, Prevailing torque type steel nuts Mechanical and performance properties DIN EN ISO 3269, Fasteners Acceptance inspection DIN EN ISO 4042, Fasteners Electroplat
12、ed coatings DIN EN ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C DIN EN ISO 6157-2, Fasteners Surface discontinuities Part 2: Nuts DIN EN ISO 8673, Hexagon nuts, style 1, with metric fine pitch thread Product grades A and B DIN EN ISO 10683, Fas
13、teners Non-electrolytically applied zinc flake coatings DIN ISO 261, ISO general purpose metric screw threads General plan DIN ISO 724, ISO general purpose metric screw threads Basic dimensions DIN ISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general pur
14、pose external and internal screw threads Medium quality DIN ISO 8992, Fasteners General requirements for bolts, screws, studs and nuts DIN EN ISO 10512:2013-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10512 December 2012 ICS 21.060.20 Supersedes EN
15、ISO 10512:1997English Version Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, crous hexagonaux normaux autofreins ( anneau non mtallique) filetage mtrique pas fin - Classes de qualit 6, 8 et 10 (ISO 10512:2012) Sechskantmutte
16、rn mit Klemmteil (mit nichtmetallischem Einsatz), Typ 1, mit metrischem Feingewinde - Festigkeitsklassen 6, 8 und 10 (ISO 10512:2012) This European Standard was approved by CEN on 3 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condition
17、s for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in
18、three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards
19、 bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni
20、a, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for
21、CEN national Members. Ref. No. EN ISO 10512:2012: E8 and 10 (ISO 10512:2012) Contents PageForeword 1 Scope 2 Normative references .3 Dimensions .44 Requirements and reference International Standards 5 Designation .Bibliography .344667. 2DIN EN ISO 10512:2013-05 EN ISO 10512:2012 (E) Foreword This do
22、cument (EN ISO 10512:2012) has been prepared by Technical Committee ISO/TC 2 in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text o
23、r by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for i
24、dentifying any or all such patent rights. This document supersedes EN ISO 10512:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R
25、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. E
26、ndorsement notice The text of ISO 10512:2012 has been approved by CEN as a EN ISO 10512:2012 without any modification. “Fasteners”3DIN EN ISO 10512:2013-05 EN ISO 10512:2012 (E) 1 ScopeThis International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-
27、metallic insert) with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for sizes D up to and including 16 mm and product grade B for sizes D above 16 mm, and with property classes 6, 8 and 10.If other specifications are required, they
28、 can be selected from existing International Standards, for example ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320 and ISO 4759-1.NOTE 1 The dimensions of the nuts correspond to those given in ISO 8673 plus prevailing torque feature.NOTE 2 As there is an insufficient nut height due to the fine pit
29、ch thread, there is a higher probability of nut thread stripping. Hence, high nuts according to ISO 7041 are preferably used.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For undated reference
30、s, the latest edition of the referenced document (including any amendments) applies.ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensionsISO 261, ISO general purpose metric screw threads General planISO 724, ISO general-purpose metric screw threads Basic dimensionsI
31、SO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch threadISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw thr
32、eads Medium qualityISO 2320, Prevailing torque type steel nuts Mechanical and performance propertiesISO 3269, Fasteners Acceptance inspectionISO 4042, Fasteners Electroplated coatingsISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and CISO 6157-2, Faste
33、ners Surface discontinuities Part 2: NutsISO 8992, Fasteners General requirements for bolts, screws, studs and nutsISO 10683, Fasteners Non-electrolytically applied zinc flake coatings3 DimensionsSee Figure 1 and Table 1.Symbols and descriptions of dimensions are specified in ISO 225.4DIN EN ISO 105
34、12:2013-05 EN ISO 10512:2012 (E) aPrevailing torque element; shape at the discretion of the manufacturer.b = 15 to 30.c = 90 to 120.Figure 1Table 1 DimensionsDimensions in millimetresThread (D Pa)M81M101M101,25M121,25M121,5(M141,5)bM161,5M201,5M242M302M362damax. 8,75 10,80 13 15,10 17,30 21,60 25,90
35、 32,40 38,90min. 8,00 10,00 12,00 14,00 16,00 20,00 24,00 30,00 36,00dwmin. 11,63 14,63 16,63 19,64 22,49 27,70 33,25 42,75 51,11e min. 14,38 17,77 20,03 23,36 26,75 32,95 39,55 50,85 60,79hmax. 9,50 11,90 14,90 17,00 19,10 22,80 27,10 32,60 38,90min 8,92 11,20 14,20 15,90 17,80 20,70 25,00 30,10 36
36、,40m min 6,44 8,04 10,37 12,10 14,10 16,90 20,20 24,30 29,40mwmin. 5,15 6,43 8,30 9,68 11,28 13,52 16,16 19,44 23,52smax. 13,00 16,00 18,00 21,00 24,00 30,00 36,00 46,00 55,00min. 12,73 15,73 17,73 20,67 23,67 29,16 35,00 45,00 53,80aP is the pitch of the thread.bThe size in parentheses should be av
37、oided, if possible.5DIN EN ISO 10512:2013-05 EN ISO 10512:2012 (E) 4 Requirements and reference International StandardsSee Table 2.Table 2 Requirements and reference International StandardsMaterial Nut body SteelInsert For example, polyamideGeneral requirements International Standard ISO 8992Thread
38、Tolerance class 6HInternational Standards ISO 261, ISO 724, ISO 965-2Mechanical and performance propertiesProperty class 6, 8, 10aInternational Standards ISO 898-2, ISO 2320Tolerance Product grade For D 16 mm: AFor D 16 mm: BInternational Standard ISO 4759-1Finish CoatingAs processedRequirements for
39、 electroplating are specified in ISO 4042.Requirements for non-electrolytically applied zinc flake coatings are specified in ISO 10683.Additional requirements or other finishes or coatings shall be agreed between the supplier and the purchaser.Surface integrity Limits for surface discontinuities are
40、 specified in ISO 6157-2.Acceptability Acceptance inspection is specified in ISO 3269.aFor D 16 mm property class 10 is not specified.5 DesignationEXAMPLE A prevailing torque type regular hexagon nut with non-metallic insert, fine pitch thread M12 1,5 and property class 8 is designated as follows:Prevailing torque type hexagon regular nut ISO 10512 - M12 1,5 - 86DIN EN ISO 10512:2013-05 EN ISO 10512:2012 (E) Bibliography1 ISO 8673, Hexagon regular nuts (style 1) with metric fine pitch thread Product grades A and B7DIN EN ISO 10512:2013-05 EN ISO 10512:2012 (E)
