1、November 2014 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I
2、CS 35.240.99; 65.060.01!%“2270204www.din.deDDIN EN 16590-1Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 1: General principles for design and development(ISO 25119-1:2010 modified);English version EN 16590-1:2014,English translation of DIN EN 16590-1
3、:2014-11Traktoren und Maschinen fr die Land- und Forstwirtschaft Sicherheitsbezogene Teile von Steuerungen Teil 1: Allgemeine Gestaltungs- und Entwicklungsleitstze (ISO 25119-1:2010 modifiziert);Englische Fassung EN 16590-1:2014,Englische bersetzung von DIN EN 16590-1:2014-11Tracteurs et matriels ag
4、ricoles et forestiers Parties des systmes de commande relatives la scurit Partie 1: Principes gnraux pour la conception et le dveloppement (ISO 25119-1:2010modifi);Version anglaise EN 16590-1:2014,Traduction anglaise de DIN EN 16590-1:2014-11www.beuth.deIn case of doubt, the German-language original
5、 shall be considered authoritative.Document comprises 33 pages 10.14 DIN EN 16590-1:2014-11 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 16590-1:2014) has been prepared by Technical Committee CEN/TC 144 “Tractors and machine
6、ry for agriculture and forestry” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the DIN-Normenausschuss Maschinenbau (DIN Standards Committee Mechanical Engineering), Working Committee NA 060-16-12 AA Elektronik of Section Landtechnik. Representatives of ma
7、nufacturers and users of agricultural machinery, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to mach
8、ines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard an
9、d thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO St
10、andards with the same number. For the International Standards referred to in this standard there are no national standards available unless they have been published as DIN ISO standards with the same number. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16590-1 April 2014 ICS 35.240.99; 65.06
11、0.01 English Version Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) Tracteurs et matriels agricoles et forestiers - Parties des systmes de commande relatives la scurit -
12、 Partie 1: Principes gnraux pour la conception et le dveloppement (ISO 25119-1:2010 modifi) - Sicherheitsbezogene Teile von Steuerungen - Teil 1: Allgemeine Gestaltungs- und Entwicklungsleitstze (ISO 25119-1:2010 modifiziert) This European Standard was approved by CEN on 23 February 2014. CEN member
13、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
14、 to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managemen
15、t Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li
16、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17,
17、 B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16590-1:2014 E Traktoren und Maschinen fr die Land- und ForstwirtschaftEN 16590-1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 7 2 Normative refer
18、ences 7 3 Terms and definitions .7 4 Abbreviated terms 14 5 Management during complete safety life cycle . 15 5.1 Objectives 15 5.2 General . 15 5.2.1 Introduction to the safety life cycle concept . 15 5.2.2 External functional safety measures 15 5.3 Prerequisites . 15 5.4 Requirements Functional sa
19、fety management activities across safety life cycle 17 5.4.1 Functional safety culture . 17 5.4.2 Continuous improvement 17 5.4.3 Training and qualification 18 5.4.4 Safety management during development 18 5.4.5 Assignment of safety responsibilities 18 5.4.6 Assignment of tasks . 18 5.4.7 Planning o
20、f all safety management activities during development 18 5.5 Work products . 21 6 Assessment of functional safety . 21 6.1 Objectives 21 6.2 General . 21 6.3 Prerequisites . 21 6.4 Requirements 21 6.4.1 Considerations for the assessment of the functional safety . 21 6.4.2 Verification 22 6.5 Work pr
21、oducts . 23 7 Safety management activities after start of production (SOP) 24 7.1 Objectives 24 7.2 General . 24 7.3 Prerequisites . 24 7.4 Requirements 24 7.4.1 Management of production and modification procedures . 24 7.4.2 Tasks for preparing and conducting production and end of line inspections
22、. 24 7.4.3 Tasks for safe machine operation and decommissioning . 24 7.5 Work products . 25 8 Production and installation of safety-related systems . 25 8.1 Objectives 25 8.2 General . 25 8.3 Prerequisites . 25 8.4 Requirements 25 8.4.1 Production plan . 25 8.4.2 Test plan 25 8.4.3 Production and te
23、sting . 26 8.4.4 Process capability 26 DINEN 16590-1:2014-11EN 16590-1:2014 (E) 3 8.4.5 Documentation 26 8.4.6 Non-compliance . 26 8.4.7 Traceability . 26 8.4.8 Storage and transport conditions 26 8.4.9 Modification . 26 8.5 Work products . 26 Annex A (informative) Example of the structure of a proj
24、ect-specific safety plan . 27 A.1 General . 27 A.2 Change log . 27 A.3 Objective of overall project 27 A.4 Schedule . 27 A.5 Project organisation 27 A.5.1 Project team organisation 27 A.5.2 Project team members 28 A.5.3 Safety management . 28 Annex ZA (informative) Relationship between this European
25、 Standard and the Essential Requirements of EU Machinery Directive 2006/42/EC . 30 Bibliography 31 DIN EN 16590-1:2014-11 EN 16590-1:2014 (E) 4 Foreword This document (EN 16590-1:2014) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secr
26、etariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is d
27、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the Euro
28、pean Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 16590 Tractors and machinery for agriculture and forestry Safety-related parts of control systems consi
29、sts of the following parts: Part 1: General principles for design and development Part 2: Concept phase Part 3: Series development, hardware and software Part 4: Production, operation, modification and supporting processes The modifications to ISO 25119-1:2010 are indicated by a vertical line in the
30、 margin. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fr
31、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DINEN 16590-1:2014-11EN 16590-1:2014(E)5 Introduction EN 16590 sets out an app
32、roach to the design and assessment, for all safety life cycle activities, of safety-relevant systems comprising of electrical and/or electronic and/or programmable electronic systems (E/E/PES) on tractors used in agriculture and forestry, and on self-propelled ride-on machines and mounted, semi-moun
33、ted and trailed machines used in agriculture. It is also applicable to municipal equipment. It covers the possible hazards caused by the functional behaviour of E/E/PES safety-related systems, as distinct from hazards arising from the E/E/PES equipment itself (e.g. electric shock, fire, nominal perf
34、ormance level of E/E/PES dedicated to active and passive safety). The control system parts of the machines concerned are frequently assigned to provide the critical functions of the safety-related parts of control systems (SRP/CS). These can consist of hardware or software, can be separate or integr
35、ated parts of a control system, and can either perform solely critical functions or form part of an operational function. In general, the designer (and to some extent, the user) will combine the design and validation of these SRP/CS as part of the risk assessment. The objective is to reduce the risk
36、 associated with a given hazard (or hazardous situation) under all conditions of use of the machine. This can be achieved by applying various protective measures (both SRP/CS and non-SRP/CS) with the end result of achieving a safe condition. EN 16590 allocates the ability of safety-related parts to
37、perform a critical function under foreseeable conditions into five performance levels. The performance level of a controlled channel depends on several factors, including system structure (category), the extent of fault detection mechanisms (diagnostic coverage), the reliability of components (mean
38、time to dangerous failure, common-cause failure), design processes, operating stress, environmental conditions and operation procedures. Three types of failures are considered: systematic, common-cause and random. In order to guide the designer during design, and to facilitate the assessment of the
39、achieved performance level, EN 16590 defines an approach based on a classification of structures with different design features and specific behaviour in case of a fault. The performance levels and categories can be applied to the control systems of all kinds of mobile machines: from simple systems
40、(e.g. auxiliary valves) to complex systems (e.g. steer by wire), as well as to the control systems of protective equipment (e.g. interlocking devices, pressure sensitive devices). EN 16590 adopts a risk-based approach for the determination of the risks, while providing a means of specifying the requ
41、ired performance level for the safety-related functions to be implemented by E/E/PES safety-related channels. It gives requirements for the whole safety life cycle of E/E/PES (design, validation, production, operation, maintenance, decommissioning), necessary for achieving the required functional sa
42、fety for E/E/PES that are linked to the performance levels. The structure of safety standards in the field of machinery is as follows. a) Type-A standards (basic safety standards) give basic concepts, principles for design and general aspects that can be applied to machinery. b) Type-B standards (ge
43、neric safety standards) deal with one or more safety aspect(s), or one or more type(s) of safeguards that can be used across a wide range of machinery: type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise); type-B2 standards on safeguards (e.g. two-hand c
44、ontrols, interlocking devices, pressure sensitive devices, guards). c) Type-C standards (machinery safety standards) deal with detailed safety requirements for a particular machine or group of machines. DIN EN 16590-1:2014-11 EN 16590-1:2014 (E) 6 This part of EN 16590 is a type-B1 standard as state
45、d in EN ISO 12100. For machines which are covered by the scope of a machine specific type-C standard and which have been designed and built according to the provisions of that standard, the provisions of that type-C standard take precedence over the provisions of this type-B standard. DINEN 16590-1:
46、2014-11EN 16590-1:2014 (E) 7 1 Scope This part of EN 16590 sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines
47、 used in agriculture. It can also be applied to municipal equipment (e.g. street-sweeping machines). It specifies the characteristics and categories required of SRP/CS for carrying out their safety functions. This part of EN 16590 is applicable to the safety-related parts of electrical/electronic/pr
48、ogrammable electronic systems (E/E/PES), as these relate to mechatronic systems. It does not specify which safety functions, categories or performance levels are to be used for particular machines. Machine specific standards (type-C standards) can identify performance levels and/or categories or they should be determined by the manufacturer of the machine based on risk assessment. It is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic). NOTE See also EN ISO 12100 for design principles
