1、June 2011 Translation by DIN-Sprachendienst.English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91
2、.100.50!$rW“1799052www.din.deDDIN EN 15817Polymer modified bituminous thick coatings for waterproofing Water resistanceEnglish translation of DIN EN 15817:2011-06Kunststoffmodifizierte Bitumendickbeschichtungen zur Bauwerksabdichtung WasserbestndigkeitEnglische bersetzung von DIN EN 15817:2011-06Rev
3、tements bitumineux pais modifis aux polymres pour impermabilisation Rsistance leauTraduction anglaise de DIN EN 15817:2011-06www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.705.11 DIN EN 15817:2011-06 A comma is used as the decimal
4、 marker. National foreword This standard has been prepared by Technical Committee CEN/TC 361 “Project Committee Polymer modified bituminous thick coatings for waterproofing Definitions/requirements and test methods” (Secretariat: DIN, Germany). The responsible German body involved in its preparation
5、 was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-02-19 AA Kunststoffmodifizierte Bitumendickbeschichtung zur Bauwerksabdichtung (SpA zu CEN/TC 361). 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15817 March 2011 ICS 91.100.50 E
6、nglish Version Polymer modified bituminous thick coatings for waterproofing Water resistance Revtements bitumineux pais modifis aux polymres pour impermabilisation Rsistance leau Kunststoffmodifizierte Bitumendickbeschichtungen zur Bauwerksabdichtung Wasserbestndigkeit This European Standard was app
7、roved by CEN on 13 February 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nation
8、al standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own languag
9、e and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
10、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2
11、011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15817:2011: EEN 15817:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms und definitions .44 Principle 45 Apparatus .46 Procedure .46.1 Preparation .46.2
12、Procedure .57 Expression of results 58 Test report 5DIN EN 15817:2011-06 EN 15817:2011 (E) 3 Foreword This document (EN 15817:2011) has been prepared by Technical Committee CEN/TC 361 “Project Committee Polymer modified bituminous thick coatings for waterproofing Definitions/requirements and test me
13、thods”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 20
14、11. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organiza
15、tions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portug
16、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 15817:2011-06 EN 15817:2011 (E) 4 1 Scope This European Standard specifies a procedure for determining the water resistance of polymer modified bituminous thick coatings for waterproofing. 2 Normative references T
17、he following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. FprEN 15814:2011, Polymer modified bituminous thic
18、k coatings for waterproofing Definitions and requirements ISO 554, Standard atmospheres for conditioning and/or testing Specifications 3 Terms und definitions For the purposes of this document, the terms and definitions given in FprEN 15814:2011 apply. 4 Principle After preparing a flexible sheet of
19、 polymer modified bitumen-emulsion, the specimen is given in water with a room temperature for 28 days. After that time a visual assessment is due. 5 Apparatus 5.1 Glass beaker containing 2,5 l tap water; dimensions of sample not less than 90 mm 250 mm. Position the sample such that 2/3 of the sampl
20、e is immersed in the water and 1/3 is not immersed. The sample is suspended in the middle of the beaker so that it is surrounded by water on all sides. 5.2 Magnetic stirrer 6 Procedure 6.1 Preparation The component of the polymer bitumen-emulsion shall be conditioned in a normal climate of (23 2) C
21、and a relative humidity of (50 5) % in accordance with ISO 554 for 28 days. To provide the specified dry layer thickness, (4 0,4) mm, the wet coating has to be levelled off with the help of a frame or gauge of a foil at room temperature as specified by the manufacturer. The size of the specimen depe
22、nds on the container. DIN EN 15817:2011-06 EN 15817:2011 (E) 5 If required, the inlay has to be incorporated. 6.2 Procedure After storage in a normal climate, the specimen shall be placed in the container with water for 28 days. During that time the water should be permanently slightly moved with th
23、e help of a magnetic stirrer. 7 Expression of results After 28 days a visual assessment is to be done, whether there are changes to the material, the reinforcement has peeled off or a discoloration of the water. 8 Test report The test report shall include at least the following information: a) all details necessary to identify the product tested; b) a reference to this European Standard (i.e. EN 15817); c) test period and thickness of the dry product; d) visual assessment after the test period; e) the date of the tests. DIN EN 15817:2011-06
