1、December 2009DEUTSCHE NORM English price group 17No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.10!$7w“1562084
2、www.din.deDDIN EN 15283-1Gypsum boards with fibrous reinforcement Definitions, requirements and test methods Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009)English version of DIN EN 15283-1:2009-12Faserverstrkte Gipsplatten Begriffe, Anforderungen und Prfverfahren Teil 1: G
3、ipsplatten mit Vliesarmierung (enthlt nderung A1:2009)Englische Fassung DIN EN 15283-1:2009-12SupersedesDIN EN 15283-1:2008-05See start of validitywww.beuth.deDocument comprises pages43DIN EN 15283-1:2009-12 Start of validity This standard is due to be valid from 1 February 2010. DIN EN 15283-1:2008
4、-05 may be used in parallel until February 2010 (see deadline in the EU Official Journal). It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Bundesanzeiger (German Federal Law Gazette) and from the date giv
5、en therein. National foreword This standard has been prepared by Technical Committee CEN/TC 241 “Gypsum and gypsum based products” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committe
6、e), Technical Committee NA 005-09-10 AA Gips und Gipsprodukte. Amendments This standard differs from DIN EN 15283-1:2008-05 as follows: a) Subclause 3.5 “Symbols and abbreviations” has been added. b) Figures B.1a to B.1c have been revised. Previous editions DIN EN 15283-1: 2008-05 2 EUROPEAN STANDAR
7、D NORME EUROPENNE EUROPISCHE NORM EN 15283-1:2008+A1 August 2009 ICS 01.040.91; 91.100.10 Supersedes EN 15283-1:2008English Version Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement Plaques de pltre armes de fibres -
8、Dfinitions, spcifications et mthodes dessai - Partie 1: Plaques de pltre armes dun tissu Faserverstrkte Gipsplatten - Begriffe, Anforderungen und Prfverfahren - Teil 1: Gipsplatten mit Vliesarmierung This European Standard was approved by CEN on 28 December 2007 and includes Amendment 1 approved by
9、CEN on 20 July 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards
10、 may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to th
11、e CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe
12、rlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation
13、in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15283-1:2008+A1:2009: EEN 15283-1:2008+A1:2009 (E) 2 Contents Page Foreword 4Introduction .71 Scope 82 Normative references 83 Terms and definitions .94 Requirements 114.1 Mechanical characteristics 114.2 Fire beha
14、viour . 124.3 Acoustic properties 124.4 Water vapour permeability (expressed as water vapour resistance factor) . 124.5 Thermal resistance (expressed as thermal conductivity) 134.6 Dangerous substances 134.7 Dimensions and tolerances . 134.8 Additional requirements for gypsum boards with mat reinfor
15、cement with reduced water absorption rate Type H1 and H2 144.9 Additional requirements for gypsum boards with mat reinforcement with enhanced surface hardness Type I . 144.10 Additional requirements for gypsum boards with mat reinforcement with improved core cohesion at high temperature Type F . 144
16、.11 Impact resistance 145 Test methods . 145.1 Sampling 145.2 Determination of width . 145.3 Determination of length . 155.4 Determination of thickness 165.5 Determination of squareness 175.6 Determination of flexural breaking load . 195.7 Determination of deflection under load 205.8 Determination o
17、f total water absorption 215.9 Determination of surface hardness of the board 216 Evaluation of conformity 246.1 General . 246.2 Initial type testing . 246.3 Factory production control 257 Designation of gypsum boards with mat reinforcement 268 Marking, labelling and packaging . 26Annex A (informati
18、ve) Sampling procedure for testing 28A.1 General . 28A.2 Sampling procedure . 28Annex B (normative) Mounting and fixing for testing according to EN 13823 (SBI test) . 30B.1 General applications 30B.2 Limited applications regarding joint filling 32B.3 Limited applications regarding wood based substra
19、tes 33DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 3 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive . 34ZA.1 Scope and relevant characteristics . 34ZA.2 Procedure of attestation of conformity of gypsum boards with mat re
20、inforcement 36ZA.3 CE marking and labelling 39DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 4 Foreword This document (EN 15283-1:2008+A1:2009) has been prepared by Technical Committee CEN/TC 241 “Gypsum and gypsum based products”, the secretariat of which is held by AFNOR. This European Standar
21、d shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. This document includes Amendment 1, approved by CEN on 2009-08-19. T
22、his document supersedes EN 15283-1:2008. The start and finish of text introduced or altered by amendment is indicated in the text by tags!“XAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respo
23、nsible for identifying any or all such patent rights. This standard includes two parts: Part 1: Gypsum boards with mat reinforcement Part 2: Gypsum fibre boards This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and support
24、s essential requirements of EU Directive 89/106. For relationship with EU Directive (s) see informative Annex ZA which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this
25、European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the Un
26、ited Kingdom. DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 5 Diagram 1 Families of gypsum products DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 6 Diagram 2 Family of ancillary products DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 7 Introduction Gypsum boards with mat reinforcement
27、are composed of set gypsum plaster core reinforced with fibres which may be inorganic and/or organic, and are arranged in a woven or non-woven mat to form flat rectangular boards. Admixtures, fillers and fibres dispersed in the core may also be present. They are usually continuously produced on an i
28、ndustrial scale. The properties of gypsum boards with mat reinforcement make them particularly suitable for use in situation where there are requirements for fire protection, sound, thermal insulation or racking strength. Gypsum boards with mat reinforcement can be fixed by various methods e.g. nail
29、ing, screwing, stapling or sticking with gypsum based or other adhesives. They can also be inserted in a suspended ceiling system or laid in floor constructions. Gypsum boards with mat reinforcement can be finished with direct surface decoration or gypsum plaster. They can be further processed into
30、a range of other products. DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 8 1 Scope This European Standard specifies the characteristics and performance of gypsum boards with mat reinforcement intended to be used in building construction works including those intended for secondary manufacturing
31、 operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. Gypsum boards with mat reinforcement are selected for use according to their type, size, thickness and edge profile. The boards can be used for example to provide dry lining finishes to walls, to
32、fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses can be for floors, ventilation and smoke extraction ducts, cable trays and sheathing applications. This European Standard covers the following product performance characteristics: reaction to fire
33、, water vapour permeability, flexural strength, and thermal resistance. The following performance characteristics are linked to systems assembled with gypsum boards with mat reinforcement: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption. If r
34、equired, tests should be done according to the corresponding European test methods on assembled systems simulating the end use conditions. This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests
35、for these characteristics. It provides for the evaluation of conformity of the product to this EN. This European Standard does not cover gypsum boards with mat reinforcement which have been subject to any secondary manufacturing operations (e.g. insulating composite panels, boards with thin laminati
36、on etc.). Products covered by EN 520 or EN 13815 are excluded. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document
37、 (including any amendments) applies. EN 520:2004, Gypsum plasterboards Definitions, requirements and test methods EN 12524, Building materials and products Hygrothermal properties Tabulated design values EN 12664, Thermal performance of building materials and products Determination of thermal resist
38、ance by means of guarded hot plate and heat flow meter methods Dry and moist products of medium and low thermal resistance EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13501-2, Fire classification of c
39、onstruction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN 13963, Jointi
40、ng materials for gypsum plasterboards Definitions, requirements and test methods EN 14195, Metal framing components for gypsum plasterboard systems Definitions, requirements and test methods DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 9 EN ISO 140-3, Acoustics - Measurement of sound insulatio
41、n in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 354, Acoustics Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 717-1, Acoustics - Rating of sound insulation in buildings an
42、d of building elements Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO 9001, Quality management systems Requirements (ISO 9001:2000) EN ISO 12572, Hygrothermal performance of building materials and products Determination of water vapour transmission properties (ISO 12572:2001) ISO 7892, Ve
43、rtical building elements Impact resistance tests Impact bodies and general test procedures 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 gypsum boards with mat reinforcement board composed of a gypsum core firmly bonded to a woven or non-wo
44、ven sheet of inorganic or organic fibres located on or just below the surfaces. The sheet may consist of single or multiple layers and may be reinforced by filaments or webs of fibre strands. The surfaces may vary according to the use and the core can also contain fibres, additives and/or fillers to
45、 impart additional properties. Gypsum boards with fibrous mat reinforcement are usually continuously produced on an industrial scale. The surfaces and edge profiles vary according to the use of the particular type of board. For the purposes of identification these boards receive the designation GM 3
46、.2 Additional features of gypsum fibre boards 3.2.1 additional features of gypsum boards with mat reinforcement performance of the types of gypsum boards with mat reinforcement defined below can be combined in one board in which case the letter identifying each type of performance satisfied is given
47、 in the designation 3.2.2 gypsum boards with mat reinforcement with reduced water absorption rate gypsum boards with mat reinforcement can have additives to reduce the water absorption rate which make them suitable for special applications in which reduced water absorption properties are required to
48、 improve the performance of the board. For the purpose of identification these boards are designated GM-H1, GM-H2 with different water absorption performance 3.2.3 gypsum boards with mat reinforcement with enhanced surface hardness boards can have enhanced surface hardness for special applications.
49、For the purpose of identification these boards receive the designation GM-I 3.2.4 gypsum boards with mat reinforcement with enhanced strength boards can have enhanced strength for special applications. For the purpose of identification these boards receive the designation GM-R DIN EN 15283-1:2009-12 EN 15283-1:2008+A1:2009 (E) 10 3.2.5 gypsum boards with mat reinforcement with improved core adhesion at high temperature these b
