1、ICS 23.040.10; 77.140.75Welded steel tubes for pressure purposes Technical delivery conditionsPart 1: Non-alloy steel tubes with specified room temperature properties(includes Amendment A1:2005)English version of DIN EN 10217-1:2002 + A1:2005Geschweite Stahlrohre fr Druckbeanspruchungen Technische L
2、ieferbedingungen Teil 1: Rohre ausunlegierten Sthlen mit festgelegten Eigenschaften bei Raumtemperatur (enthlt nderung A1:2005)A comma is used as the decimal marker.National forewordThis standard has been prepared by ECISS/TC 29 Steel tubes and fittings for steel tubes (Secretariat: Italy).The respo
3、nsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steeland Iron Standards Committee), Technical Committee Rohre aus allgemeinen Bausthlen oder Feinkornbau-sthlen.DIN V 17006-100 is the standard corresponding to CEN Technical Report CR 10260 referred to in clause
4、 2of the EN.AmendmentsThis standard differs from the August 2002 edition in that more detailed specifications regarding inspectionhave been given and Annex ZA has been revised.Previous editionsDIN 1626: 1952x-12, 1984-10; DIN 1626-1: 1965-01; DIN 1626-3: 1965-01; DIN 1626-4: 1965-01;DIN 1628: 1984-1
5、0; DIN EN 10217-1: 2002-08.National Annex NAStandard referred to(and not included in Normative references and Bibliography)DIN V 17006-100 Designation systems for steel Additional symbols for steel namesDEUTSCHE NORM April 2005DIN EN 10217-1 No part of this standard may be reproduced without the pri
6、or permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).SupersedesAugust 2002 edition.English price group 17www.din.dewww.beuth.de9637698Continued overleaf.Document comprises 39 pages.0
7、6.05English versionICS 23.040.10; 77.140.75 Supersedes EN 10217-1:2002.Welded steel tubes for pressure purposes Technical delivery conditionsPart 1: Non-alloy steel tubes with specified room temperature properties(includes Amendment A1:2005) 2005. CEN All rights of exploitation in any form and by an
8、y meansreserved worldwide for CEN national members.Ref. No. EN 10217-1:2002 + A1:2005 EGeschweite Stahlrohre fr Druckbe-anspruchungen Technische Liefer-bedingungen Teil 1: Rohre ausunlegierten Sthlen mit festgelegtenEigenschaften bei Raumtemperatur(enthlt nderung A1:2005)This European Standard was a
9、pproved by CEN on 2002-04-25 and AmendmentA1 on 2004-12-09.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references
10、 concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own
11、language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
12、 Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.Management Centre: 36, rue de Stassart, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungTubes souds en acier pour s
13、ervicesous pression Conditions techni-ques de livraison Partie 1: Tubes enacier non alli avec caractristiquesspcifies temprature ambiante(amendement A1:2005 inclus)EN 10217-1January 2005+A1May 2002Page 2EN 10217-1:2002 + A1:2005ContentsPageForeword to EN 10217-1:2002 . . . . . . . . . . . . . . . .
14、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Foreword to EN 10217-1:2002/A1:2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Scope . . . . . . . . . . . . . . . . . . . . . . . . .
15、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Terms and definitions . . .
16、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
17、 Classification and designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65.1 Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18、. . . . . . . . 65.2 Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Information to be supplied by the purchaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19、. . . . . . . . . . . . 66.1 Mandatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66.2 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20、. . . . . . . . . . . . . . . . . . . . . . . . . . 76.3 Example of an order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Manufacturing process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.1 Steelmaking process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.2 Deoxidation process . . . . . . . . . . . . . . . . . . . . . . .
22、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.3 Tube manufacture and delivery conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .
23、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.2 Chemical composition . . . . .
24、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.3 Mechanical properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118.4 Appearance and
25、 internal soundness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128.5 Straightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138.6 Pre
26、paration of ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138.7 Dimensions, masses and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
27、 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199.1 Types of inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、. . . . . . . . . . . . 199.2 Inspection documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199.3 Summary of inspection and testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29、 . . . . . . . . . . . . . . 2010 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2210.1 Frequency of tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2210.2 Preparation of samples and test pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2311 Test methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2511.1 Chemical analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2511.2 Tensile test on base material . . . . . . . . . . . . . . . . . . . .
32、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2511.3 Transverse tensile test on the weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2511.4 Flattening test . . . . . . . . . . . . . . . . . . . . . . . . . .
33、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2511.5 Drift expanding test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2611.6 Weld bend test . . . . . . . . . . . . . .
34、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2611.7 Impact test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2611.8 Leak-tightness
35、test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2711.9 Dimensional inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2811.10
36、 Visual examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2811.11 Non-destructive testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37、. . . . 2811.12 Retest, sorting and reprocessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2812 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38、. . . . . . . . . . . . 2812.1 Marking to be applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2812.2 Additional marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39、 . . . . . . . . . . . . . . . . . . . . 2913 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Annex A (normative) Qualification of welding procedure for SAW tube production . . . . . .
40、. . . . . . . . 30Annex ZA (informative) Relationship between this European Standard and the EssentialRequirements of 97/23/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Page 3EN 10217-1:2002 + A1:2005Foreword to EN 10217-1:2002This European Standard has been prepared by Technical Committee ECISS/TC 29 Steel tubes and fittings forsteel tubes, the Secretariat of which is held by UNI.T
42、his European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association, and supports essential requirements of the relevant EU Directive.For relationship with this directive, see Annex ZA.This European Standard shall be given the status
43、 of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by November 2002 at the latest.Other parts of EN 10217 are:Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature propertiesPart 3:
44、 Alloy fine grain steel tubesPart 4: Electric welded non-alloy steel tubes with specified low temperature propertiesPart 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature propertiesPart 6: Submerged arc welded non-alloy steel tubes with specified low tempera
45、ture propertiesPart 7: Stainless steel tubesAnother European Standard series covering tubes for pressure purposes is:EN 10216 Seamless steel tubes for pressure purposes.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound
46、 to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Foreword to EN 10217-1:2002/A1:2005This amendment to
47、EN 10217-1:2002 has been prepared by Technical Committee ECISS/TC 29 Steel tubesand fittings for steel tubes, the Secretariat of which is held by UNI.This European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association, and supports
48、essential requirements of the relevant EU Directive.For relationship with this directive, see Annex ZA.This amendment shall be given the status of a national standard, either by publication of an identical text or byendorsement, and conflicting national standards withdrawn, by July 2005 at the lates
49、t.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Page 4EN 10217-1:2002 + A1:20051 Scope2 Normative referencesPage 5EN 10217-1:2002 + A1:20053
