欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    DIN 7340-2011 Tubular rivets cut from the tube《管材切制的空心铆钉》.pdf

    • 资源ID:661436       资源大小:267.25KB        全文页数:12页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    DIN 7340-2011 Tubular rivets cut from the tube《管材切制的空心铆钉》.pdf

    1、March 2011 Translation by DIN-Sprachendienst.English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2

    2、1.060.40!$rA3“1793016www.din.deDDIN 7340Tubular rivets cut from the tubeEnglish translation of DIN 7340:2011-03Rohrniete aus Rohr gefertigtEnglische bersetzung von DIN 7340:2011-03Rivets tubulaires de tubeTraduction anglaise de DIN 7340:2011-03SupersedesDIN 7340:1993-05www.beuth.deDocument comprises

    3、 pagesIn case of doubt, the German-language original shall be considered authoritative.1211.11 DIN 7340:2011-03 2 A comma is used as the decimal marker. Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Dimensions and masses 4 4 Technical delivery conditions . 9 5 Designation . 11

    4、6 Application 11 DIN 7340:2011-03 3 Foreword This standard has been prepared by Working Committee NA 067-00-09 AA Verbindungselemente ohne Gewinde of the Normenausschuss Mechanische Verbindungselemente (Fasteners Standards Committee). Attention is drawn to the possibility that some of the elements o

    5、f this document may be the subject of patent rights. DIN shall not be held responsible for identifying any or all such patent rights. The DIN 4000-163 tabular layout of product properties shall apply to rivets covered in this standard. Amendments This standard differs from DIN 7340:1993-05 as follow

    6、s: a) In Table 3 (formerly Table 2) further materials have been included; b) equations for calculating head and shank masses have been included; c) the standard has been editorially revised; d) in Table 1 tolerances for wall thickness s have been included; e) normative references have been updated.

    7、Previous editions DIN 7340: 1941-04, 1953-06, 1961-01, 1969-08, 1993-05 DIN 7340:2011-03 4 1 Scope This standard specifies dimensions, masses and technical delivery conditions for two types of tubular rivet cut from tube, with nominal diameters from 1 mm to 10 mm. The two types covered here are tubu

    8、lar rivets with pan head (type A) and tubular rivets with rolled back round head (type B). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editio

    9、n of the referenced document (including any amendments) applies. DIN 101, Rivets Technical specifications DIN 4000-163, Tabular layout of product properties Part 163: Fasteners without thread DIN EN 754-2, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 2: Mechanical properties DIN E

    10、N 10296-2, Welded circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 2: Stainless steel DIN EN 10305-1, Steel tubes for precision applications Technical delivery conditions Part 1: Seamless cold drawn tubes DIN EN 12449, Copper and copper alloys S

    11、eamless, round tubes for general purposes 3 Dimensions and masses See Figure 1, Figure 2 and Table 1. Figure 1 Type A, with pan head Figure 2 Type B, with rolled back round head DIN 7340:2011-03 5 Table 1 Dimensions and masses Dimensions in millimetres d1Nominal size 1 1,2 1,5 2 2,5 3 4 Limit deviat

    12、ions 0,03 0,05 0,07 d2Nominal size 1,6 2 2,5 3,2 4 4,5 6 Limit deviations 0,15 0,2 0,25 k 0,25 0,3 0,35 0,40 0,40 0,45 0,40 0,50 0,60 0,50 0,50 0,60 0,65 0,70 0,80 r max. 0,20 0,25 0,30 0,40 s Nominal sizea 10 % 0,2 0,25 0,2 0,3 0,25 0,3 0,4 0,25 0,3 0,5 0,3 0,4 0,5 L Mass (7,85 kg/dm3) kg per 1 000

    13、 units bNominal size Limit deviations 2 0,12 0,010 0,014 0,019 0,023 0,029 0,041 2,5 0,012 0,016 0,022 0,027 0,033 0,047 3 0,014 0,019 0,025 0,030 0,038 0,054 0,063 0,074 0,095 0,083 0,098 0,151 3,5 0,15 0,016 0,021 0,029 0,034 0,042 0,060 0,070 0,083 0,105 0,091 0,108 0,166 4 0,018 0,023 0,032 0,03

    14、8 0,047 0,066 0,077 0,091 0,115 0,100 0,118 0,182 0,178 0,232 0,281 5 0,022 0,028 0,038 0,046 0,056 0,079 0,091 0,107 0,136 0,117 0,138 0,212 0,206 0,267 0,325 6 0,026 0,033 0,045 0,054 0,064 0,091 0,105 0,123 0,157 0,134 0,158 0,243 0,233 0,303 0,368 7 0,18 0,030 0,038 0,051 0,061 0,073 0,104 0,119

    15、 0,140 0,178 0,151 0,178 0,274 0,261 0,338 0,411 8 0,034 0,043 0,057 0,069 0,082 0,116 0,133 0,156 0,198 0,168 0,198 0,305 0,288 0,374 0,454 10 0,042 0,053 0,070 0,084 0,100 0,142 0,161 0,188 0,240 0,202 0,238 0,367 0,343 0,445 0,540 12 0,20 0,050 0,063 0,083 0,100 0,118 0,167 0,188 0,221 0,281 0,23

    16、6 0,277 0,428 0,397 0,516 0,627 15 0,062 0,078 0,102 0,123 0,144 0,205 0,230 0,270 0,343 0,286 0,337 0,521 0,480 0,622 0,756 See page 8 for a andb. DIN 7340:2011-03 6 Table 1 (continued) d1Nominal size 1 1,2 1,5 2 2,5 3 4 Limit deviations 0,03 0,05 0,07 d2Nominal size 1,6 2 2,5 3,2 4 4,5 6 Limit dev

    17、iations 0,15 0,2 0,25 k 0,25 0,30 0,35 0,40 0,40 0,45 0,40 0,50 0,60 0,50 0,50 0,60 0,65 0,70 0,80 r max. 0,20 0,25 0,30 0,40 s Nominal sizea10 % 0,2 0,25 0,2 0,3 0,25 0,3 0,4 0,25 0,3 0,5 0,3 0,4 0,5 l Mass (7,85 kg/dm3) kg per 1 000 units bNominal size Limit deviations 18 0,20 0,074 0,093 0,121 0,

    18、146 0,171 0,242 0,272 0,319 0,406 0,337 0,397 0,613 0,562 0,729 0,886 20 0,25 0,081 0,102 0,134 0,161 0,189 0,267 0,299 0,351 0,447 0,371 0,437 0,675 0,616 0,800 0,972 22 0,207 0,293 0,327 0,384 0,488 0,405 0,477 0,736 0,671 0,871 1,06 25 0,233 0,330 0,369 0,433 0,551 0,456 0,537 0,829 0,753 0,977 1

    19、,19 28 0,260 0,368 0,410 0,481 0,613 0,507 0,597 0,921 0,835 1,08 1,32 30 0,278 0,393 0,438 0,514 0,654 0,541 0,637 0,983 0,890 1,15 1,40 32 0,30 0,466 0,546 0,696 0,575 0,677 1,04 0,945 1,23 1,49 35 0,507 0,595 0,758 0,625 0,737 1,14 1,03 1,33 1,62 38 0,549 0,644 0,820 0,676 0,797 1,23 1,11 1,44 1,

    20、75 40 0,577 0,677 0,861 0,710 0,837 1,29 1,16 1,51 1,84 45 0,795 0,937 1,45 1,30 1,69 2,05 50 0,880 1,04 1,60 1,44 1,87 2,27 55 0,35 1,57 2,04 2,48 60 1,71 2,22 2,70 See page 8 for a andb. DIN 7340:2011-03 7 Table 1 (continued) d1Nominal size 5 6 8 10 Limit deviations 0,07 0,1 d2Nominal size 7,5 9 1

    21、2 15 Limit deviations 0,25 0,3 k 0,75 0,90 1,00 0,95 1,00 1,10 1,30 1,20 1,30 1,40 1,50 1,50 1,60 1,70 r max. 0,5 0,6 0,8 1,0 s Nominal sizea 10 % 0,3 0,5 0,75 0,4 0,5 0,75 1 0,4 0,5 0,75 1 0,5 0,75 1 l Mass (7,85 kg/dm3) kg per 1 000 units bNominal size Limit deviations 4 0,15 0,249 0,397 0,562 5 0

    22、,283 0,452 0,641 6 0,318 0,508 0,719 0,540 0,66 0,95 1,21 7 0,18 0,353 0,563 0,798 0,596 0,73 1,05 1,33 0,903 1,11 1,61 2,08 8 0,388 0,619 0,876 0,651 0,80 1,14 1,45 0,978 1,21 1,75 2,25 1,68 2,45 3,17 10 0,457 0,730 1,03 0,761 0,93 1,34 1,70 1,13 1,39 2,02 2,60 1,91 2,79 3,62 12 0,20 0,527 0,841 1,

    23、19 0,872 1,07 1,53 1,95 1,28 1,58 2,29 2,94 2,14 3,13 4,06 15 0,631 1,01 1,43 1,04 1,27 1,82 2,32 1,50 1,85 2,69 3,46 2,50 3,64 4,73 18 0,735 1,17 1,66 1,20 1,48 2,11 2,69 1,73 2,13 3,09 3,98 2,85 4,16 5,39 20 0,25 0,805 1,28 1,82 1,31 1,61 2,31 2,93 1,88 2,32 3,36 4,32 3,08 4,50 5,84 22 0,875 1,40

    24、1,98 1,42 1,75 2,50 3,18 2,03 2,50 3,63 4,67 3,32 4,84 6,28 25 0,979 1,56 2,21 1,59 1,95 2,79 3,55 2,25 2,78 4,03 5,19 3,67 5,36 6,95 See page 8 for a andb. DIN 7340:2011-03 8 Table 1 (continued) d1Nominal size 5 6 8 10 Limit deviations 0,07 0,1 d2Nominal size 7,5 9 12 15 Limit deviations 0,25 0,3 k

    25、 0,75 0,90 1,00 0,95 1,00 1,10 1,30 1,20 1,30 1,40 1,50 1,50 1,60 1,70 r max. 0,5 0,6 0,8 1,0 s Nominal sizea 10 % 0,3 0,5 0,75 0,4 0,5 0,75 1 0,4 0,5 0,75 1 0,5 0,75 1 L Mass (7,85 kg/dm3) kg per 1 000 units bNominal size Limit deviations 28 0,25 1,08 1,73 2,45 1,76 2,16 3,09 3,92 2,48 3,06 4,43 5,

    26、70 4,02 5,87 7,61 30 1,15 1,84 2,61 1,87 2,29 3,28 4,17 2,63 3,24 4,70 6,05 4,25 6,21 8,06 32 0,30 1,22 1,95 2,76 1,98 2,43 3,47 4,41 2,78 3,43 4,97 6,39 4,49 6,55 8,50 35 1,33 2,12 3,00 2,14 2,63 3,77 4,78 3,00 3,70 5,37 6,91 4,84 7,07 9,17 38 1,43 2,28 3,23 2,31 2,83 4,06 5,15 3,23 3,98 5,77 7,43

    27、5,19 7,58 9,83 40 1,50 2,39 3,39 2,42 2,97 4,25 5,40 3,38 4,17 6,04 7,78 5,42 7,92 10,3 45 1,67 2,67 3,78 2,69 3,31 4,74 6,01 3,75 4,63 6,71 8,64 6,01 8,78 11,4 50 1,85 2,95 4,18 2,97 3,65 5,22 6,63 4,13 5,09 7,38 9,50 6,60 9,63 12,5 55 0,35 2,02 3,23 4,57 3,25 3,99 5,71 7,25 4,50 5,55 8,05 10,4 7,1

    28、8 10,5 13,6 60 2,20 3,50 4,96 3,52 4,33 6,19 7,86 4,88 6,01 8,72 11,2 7,77 11,3 14,7 aPlus a deviation from coaxiality of 10 % relative to the actual mean wall thickness. See Table 2 for b. DIN 7340:2011-03 9 Table 2 Conversion factors for values of mass Material St, stainless steel Cu CuZn Al Conve

    29、rsion factor 1,000 1,134 1,070 0,344 The values of mass specified are approximate values calculated on the basis of nominal sizes. For calculations the following equation shall be used: fsdsdlG += )()63,0(11T where GTis the mass, in kg/1 000 units; l is the shank length, in mm; d1is the nominal diam

    30、eter of the shank, in mm; s is the wall thickness, in mm; is the density, in kg/dm3(for steel 7,85 kg/dm3); f is the conversion factor for density and number of units (= 0,001 33mmdm). 4 Technical delivery conditions See Table 3. DIN 7340:2011-03 10 Table 3 Technical delivery conditions Material Ste

    31、el (St) Stainless steel Aluminium (Al) Copper-zinc alloy (CuZn) Copper (Cu) Symbol Material number Symbol Material number Symbol Material number Symbol Material number Symbol Material number E235 E215 1.0308 1.0212 X5CrNi18-10 1.4301 EN AW-Al99,5 EN AW-1050A CuZn37 CuZn36 CW508L CW507L Cu-DHP CW024A

    32、 At the manufacturers discretion At the manufacturers discretion Standard DIN EN 10305-1 DIN EN 10296-2 DIN EN 754-2 DIN EN 12449 DIN EN 12449 Dimensional and geometrical tolerances DIN 101 Surface finish Standard finish: bright Where a specific protective coating is required (e.g. an electroplated

    33、coating), this shall be agreed when ordering. Testing of mechanical properties DIN 101 Acceptance inspection DIN 101 NOTE The tube materials specified are those commonly used for rivet manufacture. Other materials can be used subject to agreement or shall be itemized separately. Where tube materials

    34、 of equivalent quality are used, these need not be expressly stated. DIN 7340:2011-03 11 5 Designation Designation of a tubular rivet of type B, with a nominal diameter d1= 4 mm, a wall thickness s = 0,5 mm and a length l = 10 mm, made of CuZn: Tubular rivet DIN 7340 B 4 0,5 10 CuZn 6 Application Ta

    35、ble 4 specifies hole diameters and gives guideline values for the length of projection z as a function of the shank diameter d1 and wall thickness s. Examples of application are shown in Figures 3 and 4. The values of z are for guidance only. Trial riveting is recommended, especially in the case of

    36、series production. Figure 3 Type A Figure 4 Type B DIN 7340:2011-03 12 Table 4 Hole diameters and guideline values for length of projection Dimensions in millimetres Shank diameter d11 1,2 1,5 2 2,5 3 4 Clearance hole d7H12 1,05 1,25 1,55 2,10 2,60 3,10 4,20 Wall thickness s 0,20 0,20 0,20 0,25 0,20

    37、 0,30 0,25 0,30 0,40 0,25 0,30 0,50 0,30 0,40 0,50 Length of projection z 0,8 1,0 1,1 1,2 1,2 1,5 1,4 1,7 2,0 1,8 2,0 2,2 2,0 2,2 2,5 Table 4 (continued) Shank diameter d15 6 8 10 Clearance hole d7H12 5,2 6,3 8,4 10,5 Wall thickness s 0,30 0,50 0,75 0,40 0,50 0,75 1,00 0,40 0,50 0,75 1,00 0,50 0,75 1,00 Length of projection z 2,5 3,0 3,5 2,5 3,0 3,5 4,0 3,0 3,5 3,7 4,0 3,5 3,7 4,0


    注意事项

    本文(DIN 7340-2011 Tubular rivets cut from the tube《管材切制的空心铆钉》.pdf)为本站会员(吴艺期)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开