1、ICS 17.040.30; 21.040.10Geometrische Produktspezifikation (GPS) Gewinde-Ausschusslehrdorne Teil 1: Ausschussarbeitslehren,Prf- und Einstelldorne fr Metrisches ISO-Gewinde allgemeinerAnwendung von 1 mm bis 40 mm Gewinde-NenndurchmesserIn keeping with current practice in standards published by the Int
2、ernational Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.ForewordThis standard has been prepared by Technical Committee Gewindeprfung of the NormenausschussTechnische Grundlagen (Fundamentals in Technology Standards Committee).AmendmentsThis standard d
3、iffers from the November 1989 edition as follows:a) The specifications for type R gauge handles have been harmonized with those given in the December2001 edition of DIN 2240-1.b) The terminology has been harmonized with that used in DIN ISO 1502.c) Symbols and details of designation have been change
4、d.d) The standard has been editorially revised.Previous editionsDIN 91510: 1940-05; DIN 91510-4: 1944-07; DIN 91510-7: 1940-07; DIN 2283: 1927-07;DIN 2283-1: 1953-11, 1977-12, 1989-11.Ref. No. DIN 2283-1 : 2001-12English price group 05 Sales No. 010511.02DEUTSCHE NORM December 20012283-1Continued on
5、 pages 2 to 4. No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Geometrical product specifications (GPS)NOT GO works
6、hop screw plug gauges, check plugs andsetting plugs for general purpose ISO metric screw threadswith nominal diameters from 1 mm to 40 mmTranslation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.SupersedesNovember 1989 edition.All
7、dimensions are in millimetres.1 ScopeThis standard specifies the dimensions and designation for NOT GO screw plug gauges used for checkinggeneral purpose ISO metric screw threads with a basic profile as in DIN ISO 68-1 and a nominal profile asin DIN 13-19, for NOT GO screw and wear check plugs for G
8、O and NOT GO screw ring gauges, and for settingplugs for NOT GO screw calliper gauges.Page 2DIN 2283-1 : 2001-122 Normative referencesThis standard incorporates, by dated or undated reference, provisions from other publications. These normativereferences are cited at the appropriate places in the te
9、xt, and the titles of the publications are listed below. Fordated references, subsequent amendments to or revisions of any of these publications apply to this standardonly when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to appli
10、es.DIN 13-19 General purpose ISO metric screw threads Nominal profilesDIN 2239 Gauges for use in dimensional metrology Requirements and testingDIN 2240-1 Geometrical product specifications (GPS) Gauge handles for gauging members up to 40 mmnominal diameter with 1:50 taper shankDIN 2279 Geometrical p
11、roduct specifications (GPS) Gauges for internal and external ISO metric screwthreads Overview of types, marking and applicationDIN 2284-1 NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs forgeneral purpose ISO metric screw threads with nominal diameters from 1 mm
12、to 40 mmDIN ISO 68-1 General purpose ISO screw threads Basic profile Part 1: Metric screw threads(ISO 68-1 : 1998)DIN ISO 1502 ISO general-purpose metric screw threads Gauges and gauging (ISO 1502 : 1996)3 Dimensions and designation3.1 DimensionsNOT GO screw plug gauge dimensions shall be as given i
13、n figure 1 and tables 1 to 3.Key to figure1 NOT GO screw gauging member as in DIN 2284-12 Gauge handle as in DIN 2240-1Figure 1: NOT GO screw plug gauge dimensions (notation)3.2 DesignationDesignation of a NOT GO screw plug gauge designed to check an M12 thread made to 6H tolerance, providedwith a t
14、ype R gauge handle as in DIN 2240-1 (standard design):Gauge DIN 2283 M12 6HDesignation of a NOT GO check plug (NOT GO) for inspecting a new solid GO screw ring gauge (G) designedto check an M12 thread made to 6g tolerance, provided with a type R gauge handle as in DIN 2240-1 (standarddesign):Check p
15、lug DIN 2283 NOT GO G M12 6gDesignation of a NOT GO check plug (NOT GO) for inspecting a new solid NOT GO screw ring gauge (A) designedto check an M20 G180 1,5 thread made to 6g tolerance, provided with a type R gauge handle as in DIN 2240-1(standard design):Check plug DIN 2283 NOT GO A M20 c233 1,5
16、 6gDesignation of a wear check plug (Ap) for inspecting a solid or adjustable GO screw ring gauge (G) designed tocheck an M12 thread made to 6g tolerance, provided with a type R gauge handle as in DIN 2240-1 (standarddesign):Check plug DIN 2283 Ap G M12 6gGauge handleType R Type SPage 3DIN 2283-1 :
17、2001-12Designation of a wear check plug (Ap) for inspecting a solid or adjustable NOT GO screw ring gauge (A) designedto check an M20 thread made to 6g tolerance, provided with a type R gauge handle as in DIN 2240-1 (standarddesign):Check plug DIN 2283 Ap A M20 6gDesignation of a setting plug (set)
18、for inspecting an adjustable NOT GO screw calliper gauge (NOT GO) designedto check an M36 G180 2 thread made to 8g tolerance, provided with a type R gauge handle as in DIN 2240-1(standard design):Setting plug DIN 2283 set NOT GO M36 c233 28gIf plug gauges are to be supplied with type S handle, this
19、shall be indicated in the designation by including thesymbol S.EXAMPLE:Designation of a NOT GO check plug (NOT GO) for inspecting a new solid NOT GO screw ring gauge (A) designedto check an M20 G180 1,5 thread made to 6g tolerance, provided with a type S handle (S):Check plug DIN 2283 S NOT GO A M20
20、 c233 1,5 6gTable 1: Gauge handle dimensionsNominal diameter,d1e(approx.)Gauge handleas inDIN 2240-1From 01 to 0 3Over 03 up to 06Over 06 up to 10Over 10 up to 14Over 14 up to 18Over 18 up to 30Over 30 up to 40orororororororTable 2: Length l (coarse pitch thread)Nominal diameter,d1Nominal diameter,d
21、1l(approx.)l(approx.)From toandandFrom toFrom toFrom toandPage 4DIN 2283-1 : 2001-12Table 3: Length l (fine pitch thread)4 RequirementsPlug gauges shall comply with the technical delivery conditions specified in DIN 2239, their marking being asspecified in DIN 2279.Other relevant standardsDIN 2283-2
22、 Geometrical product specifications (GPS) NOT GO workshop screw plug gauges, check plugsand setting plugs for general purpose ISO metric screw threads with nominal diameters over40 mm up to 200 mmDIN 2283-3 Geometrical product specifications (GPS) NOT GO workshop screw plug gauges and checkplugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use inprecision engineeringNominal diameter,d1Approximatelength, l,for a pitch ofFrom toFrom toFrom toFrom toandFrom toFrom toandFrom toFrom toFrom to
