1、CSA B45.12-13/IAPMO Z402-2013Aluminum and copper plumbing fixturesLegal Notice for Harmonized StandardJointly Developed by CSA and IAPMOIntellectual property rights and ownershipAs between Canadian Standards Association (operating as CSA Group) and International Association of Plumbing and Mechanica
2、l Officials (IAPMO) (collectively CSA Group and IAPMO) and the users of this document (whether it be in printed or electronic form), CSA Group and IAPMO are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), an
3、d all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the intellectua
4、l property of CSA Group and IAPMO may give rise to a right in CSA Group and IAPMO to seek legal redress for such use, modification, copying, or disclosure. CSA Group and IAPMO reserve all intellectual property rights in this document.Disclaimer and exclusion of liabilityThis document is provided wit
5、hout any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual proper
6、ty rights. CSA Group and IAPMO do not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group and IAPMO make no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL
7、 CSA GROUP AND IAPMO, THEIR RESPECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQ
8、UENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CS
9、A GROUP OR IAPMO HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group and IAPMO are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty o
10、wed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group and IAPMO accept no responsibility whatsoever arising in any way from any and all use of or relian
11、ce on the information contained in this document. CSA Group and IAPMO have no power, nor do they undertake, to enforce compliance with the contents of the standards or other documents they jointly publish. Authorized use of this documentThis document is being provided by CSA Group and IAPMO for info
12、rmational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:. load this document onto a computer for the sole purpose of reviewing it;. search and browse this document; and. print this document if it is in PDF format.
13、Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group and IAPMO to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to. alter this document in any way or
14、remove this Legal Notice from the attached standard;. sell this document without authorization from CSA Group and IAPMO; or. make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make
15、 any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceCSA B45.12-13/IAPMO Z402-2013December 2013Title: Aluminum and co
16、pper plumbing fixturesPagination: 29 pages (xi preliminary and 18 text), each dated December 2013To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2422024.
17、If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Published in December 2013
18、 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit the CSA Group Online Store at shop.csa.caThe IAPMO Group5001 East Philadelphia StreetOntario, California 91761-2816, USA1-800-854-2766 1-909-472
19、-4100Visit the IAPMO Online Store at www.IAPMOstore.orgCSA B45.12-13/IAPMO Z402-2013Aluminum and copper plumbing fixturesCSA/IAPMO StandardCommitment for AmendmentsThis Standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) and the International Association of Pl
20、umbing and Mechanical Officials (IAPMO). Amendments to this Standard will be made only after processing according to the Standards writing procedures of both CSA and IAPMO.Published in December 2013 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100Mississauga, Onta
21、rio, CanadaL4W 5N61-800-463-6727 416-747-4044Visit the CSA Online Store at shop.csa.caISBN 978-1-77139-167-2 2013 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.The IAPMO Group5001 East Philadelphia Str
22、eetOntario, California 91761-2816USA1-800-854-2766 1-909-472-4100Visit the IAPMO Online Store atwww.IAPMOstore.orgCopyright 2013 by International Association of Plumbing and Mechanical OfficialsThe 2013 edition of this Standard is being issued with an automatic addenda subscription service. The use
23、of addenda allows revisions made in response to public review comments or committee actions to be published as necessary.December 2013 iiiContents 2013 CSA Group The IAPMO Group Aluminum and copper plumbing fixturesCSA Technical Committee on Plumbing Fixtures (B45) vIAPMO Plumbing Standards Committe
24、e viiCSA/IAPMO Harmonization Task Group on Plumbing Fixtures ixPreface x0Introduction 11Scope 12 Reference publications 23 Definitions 34 General requirements 34.1 General 34.1.1 Tolerances 34.1.2 Coated parts 44.1.3 Accessible design fixtures 44.2 Waste fitting openings, drainage, and overflows 44.
25、2.1 Openings and drainage 44.2.2 Overflows 44.3 Lavatories and sinks 44.3.1 Openings and mounting surfaces for supply fittings 44.4 Bathtubs and shower bases 54.4.1 Flanges 54.4.2 Slope to the waste outlet 54.4.3 Minimum dimensions for bathtubs 54.4.4 Factory-supplied supply fittings 54.5 Materials
26、54.5.1 Copper alloys 54.5.2 Aluminum alloys 55 Test procedures 55.1 General 55.2 Surface examination test 65.2.1 Procedure 65.2.2 Performance 65.3 Corrosion resistance test for aluminum fixtures 65.3.1 Procedure 65.3.2 Performance 65.4 Warpage tolerance test 65.4.1 Procedure 65.4.2 Performance 65.5
27、Structural integrity tests 75.5.1 Load test for bathtub and shower seats 75.5.2 Load test for bathtub rims and bottoms and shower thresholds and bottoms 75.5.3 Load test for unsupported bathtub areas 95.5.4 Load test for sinks and lavatories 9 2013 CSA GroupCSA B45.12-13/IAPMO Z402-2013 The IAPMO Gr
28、oupiv December 20135.6 Soap and cleaner effects for fixtures with organic coatings 95.6.1 Test specimen 95.6.2 Procedure 105.6.3 Performance 105.7 Field-installed tiling-flange seal test 105.7.1 Procedure 105.7.2 Performance 105.8 Overflow test for sinks and lavatories 105.8.1 Procedure 105.8.2 Perf
29、ormance 106 Markings, packaging, and literature 116.1 General 116.2 Non-standard fixtures 116.3 Field-installed flanges 116.4 Packaging 116.5 Installation instructions 11AnnexesA (informative) Unit conversion and rounding criteria 18Figures1 Waste outlets dimensions 122 Opening and mounting surface
30、dimensions for standard 200 mm (8 in) deck fittings 133 Opening and mounting surface dimensions for standard 200 mm (8 in) combination fittings 134 Opening and mounting surface dimensions for standard 100 mm (4 in) centre-set fittings 145 Opening and mounting surface dimensions for standard 200 mm (
31、8 in) combination fittings 146 Opening and mounting surface dimensions for single-mount supply fittings 157 Minimum dimensions for bathtubs 158 Alternative load test for bathtub rims and bottoms 169 Test for secondary loads on bathtub rims and bottoms and load test for unsupported bathtub areas 1710
32、 Test for secondary loads on shower thresholds and bottoms 17 2013 CSA Group The IAPMO Group Aluminum and copper plumbing fixturesDecember 2013 vCSA Technical Committee on Plumbing Fixtures (B45)S. Rawalpindiwala Kohler Co.,Kohler, Wisconsin, USAChairF. Lemieux Health Canada, Ottawa, OntarioVice-Cha
33、irJ.E. Bertrand Moen Incorporated, North Olmsted, Ohio, USAM. Campos International Code Council,Whittier, California, USAAssociateS.L. Cavanaugh Cavanaugh Consulting, Santa Fe, New Mexico, USAI.W. Chang Intertek,Coquitlam, British ColumbiaAssociateM. Chojnacka City of Toronto, Toronto, OntarioN. Dic
34、key CSA Group,Cleveland, Ohio, USAAssociateY. Duchesne Rgie du btiment du Qubec, Qubec, QubecT. Eberhardy Bradley Corporation, Menomonee Falls, Wisconsin, USAAssociateT.D. Ellison Cheffell Associates, Rockland, OntarioK. Ernst Oakville Stamping (b) provide an explanation of circumstances surrounding
35、 the actual field condition; and(c) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Sta
36、ndards Activities page at standardsactivities.csa.ca.(5) This Standard is subject to review five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagr
37、oup.org and include “Proposal for change” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change.(6) Attention is drawn to the possibility that some of the elements of this Standard ma
38、y be the subject of patent rights. CSA is not to be held responsible for identifying any or all such patent rights. Users of this Standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.IAPMO Notes: (1) The use of the singular
39、does not exclude the plural (and vice versa) when the sense allows. (2) This standard was developed in accordance with the IAPMO procedures accredited as meeting the criteria for American National Standards and it is an American National Standard. The IAPMO Standards Committee that approved this Sta
40、ndard was balanced to assure that individuals from competent and concerned interests had an opportunity to participate. During its development, this Standard was made available for public review, thus providing an opportunity for additional input from industry, academia, regulatory agencies, and the
41、 public at large. (3) This Standard was developed by consensus, which is defined as substantial agreement; consensus implies much more than a simple majority, but not necessarily unanimity. It is consistent with this definition that a member of the relevant IAPMO Standards Committee can be included
42、in the committee roster and yet not be in full agreement with all sections of this Standard.(4) Although the intended primary application of this Standard is stated in its scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for thei
43、r particular purpose. 2013 CSA Group The IAPMO Group Aluminum and copper plumbing fixturesDecember 2013 xi(5) IAPMO Standards are subject to periodic review and suggestions for their improvement will be referred to the relevant IAPMO Standards Committee. To submit a proposal for change to this Stand
44、ard, you may send the following information to the International Association of Plumbing and Mechanical Officials, Attention Standards Department, at standardsIAPMOstandards.org or, alternatively, at 5001 East Philadelphia Street, Ontario, California, 91761, and include “Proposal for change” in the
45、subject line:(a) standard designation (number);(b) relevant section, table, or figure number, as applicable;(c) wording of the proposed change, tracking the changes between the original and the proposed wording; and(d) rationale for the change.(6) Requests for interpretation should be clear and unam
46、biguous. To submit a request for interpretation of this Standard, you may send the following information to the International Association of Plumbing and Mechanical Officials, Attention Standards Department, at standardsIAPMOstandards.org or, alternatively, at 5001 East Philadelphia Street, Ontario,
47、 California, 91761, and include “Request for interpretation” in the subject line:(a) the edition of the standard for which the interpretation is being requested;(b) the definition of the problem, making reference to the specific section and, when appropriate, an illustrative sketch explaining the qu
48、estion;(c) an explanation of circumstances surrounding the actual field conditions; and(d) the request for interpretation phrased in such a way that a “yes” or “no” answer will address the issue.(7) Interpretations are processed in accordance with IAPMOs accredited standards development procedures.
49、IAPMO issues written replies to inquiries concerning interpretation of technical aspects of this Standard. (8) IAPMO accepts responsibility only for those interpretations of this Standard issued in accordance with the accredited IAPMO policies and procedures, which precludes the issuance of interpretations by individuals.(9) IAPMO does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.(10)Attention is drawn to the possibility that some of the elements of this Standard may be the subject of pa
