1、CAN/CSA-ISO 20121:13Event sustainability management systems Requirements with guidance for use(ISO 20121:2012, IDT)CAN/CSA-ISO 20121:13(ISO 20121:2012, IDT)National Standard of Canada ISO 2012. CSA Group 2013. All rights reserved. Unauthorized reproduction is strictly prohibited.Legal Notice for Sta
2、ndardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a st
3、andard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or
4、 conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant th
5、e accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AF
6、FILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR
7、ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COST
8、S, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directe
9、d to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishe
10、s voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printe
11、d or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inve
12、ntions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/o
13、r others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be t
14、he subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis docum
15、ent is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITI
16、SIN0$ equal access and effective participation by concerned interests; respect for diverse interests and identification of those who should be afforded access to provide the needed balance of interests; mechanism for dispute resolution; openness and transparency; open access by interested parties to
17、 the procedures guiding the standards development process; clarity with respect to the processes; and Canadian interest consideration as the initial basis for the development of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an SCC-accredited SDO and approved by
18、 the SCC according to NSC approval requirements. Approval does not refer to the technical content of the standard, as this remains the responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a b
19、alance of representation of general interests, producers, regulators, users (including consumers) and others with relevant interests, as may be appropriate to the subject at hand. NSCs are intended to make a significant and timely contribution to the Canadian interest. Those who have a need to apply
20、 standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO that publishes the standard. The responsibility for approving standards as NSCs rests withStandards Council of Canada 270 Albert Street, Suite
21、200 Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, oper
22、ating as “CSA Group”Cette Norme Nationale du Canada est disponible en versions franaise et anglaise.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Approved byNational Standard of CanadaPublished in August 2013 by CSA GroupA not-for-profit private sector organization506
23、0 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caICS 03.100.01; 13.020.01Prepared byInternational Organization for StandardizationCAN/CSA-ISO 20121:13Event sustainability management systems Requirements with guidance for u
24、se(ISO 20121:2012, IDT)Reviewed byCAN/CSA-ISO 20121:13Event sustainability management systems Requirements with guidance for useCSA/4 2013 CSA Group August 2013CAN/CSA-ISO 20121:13Event sustainability management systems Requirements with guidance for use(ISO 20121:2012, IDT)CSA PrefaceThis is the fi
25、rst edition of CAN/CSA-ISO 20121, Event sustainability management systems Requirements with guidance for use, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 20121 (first edition, 2012-06-15). For brevity, this Standar
26、d will be referred to as “CAN/CSA-ISO 20121” throughout.The CSA Technical Committee on Sustainable Events seeks to maintain and develop Standards-based solutions for sustainable event management in Canada.This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Sustainable
27、Events, under the jurisdiction of the CSA Strategic Steering Committee on Business Management and Sustainability, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada. 2013 CSA GroupAll rights r
28、eserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. ISO material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.I
29、nquiries regarding this National Standard of Canada should be addressed toCSA Group5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000http:/csa.caTo purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free 1-800-46
30、3-6727 or 416-747-4044.This Standard is subject to review five years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal
31、for change” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change.CSA Technical Committee on Sustainable EventsA. Duffy The Ann Duffy Group,Vancouver, British ColumbiaRepresenting Use
32、r InterestChairJ. Beveridge North Vancouver, British Columbia AssociateM. Dolf University of British Columbia,Vancouver, British ColumbiaRepresenting General InterestF. Kilburn Tides Canada Initiatives,North Vancouver, British ColumbiaAssociateD. Laframboise Clean Air Champions,Ottawa, OntarioRepres
33、enting General InterestP. MacLean EEM Inc.,Westmount, QubecRepresenting User InterestN. McGuigan TrafficDriven,Vancouver, British ColumbiaAssociateM. McIlwraith Meeting Change,North Vancouver, British ColumbiaRepresenting User InterestE. Musso Ontario Ministry of the Environment,Toronto, OntarioRepr
34、esenting Government and/or Regulatory AuthorityE. Patterson Live Nation Entertainment Canada,Toronto, OntarioRepresenting User InterestS. Reeve Government of British Columbia,Victoria, British ColumbiaRepresenting Government and/or Regulatory AuthorityC. Strandberg Strandberg Consulting,Burnaby, Bri
35、tish ColumbiaRepresenting General InterestG. Stratton Strategin Solutions,North Vancouver, British ColumbiaRepresenting User InterestD. Uy Canadian Heritage Sport Canada,Gatineau, QubecRepresenting Government and/or Regulatory AuthorityR. White BRI International Inc.,Toronto, OntarioRepresenting Gen
36、eral InterestN. Wright Globe Foundation,Vancouver, British ColumbiaRepresenting General InterestH. Davies CSA Group,Ottawa, OntarioProject ManagerJ. Fung CSA Group,Toronto, Ontario Project ManagerReference numberISO 20121:2012(E)ISO 2012INTERNATIONAL STANDARD ISO20121First edition2012-06-15Event sus
37、tainability management systems Requirements with guidance for use Systmes de management responsable appliqus lactivit vnementielle Exigences et recommandations de mise en uvre ISO 20121:2012(E) COPYRIGHT PROTECTED DOCUMENT ISO 2012 All rights reserved. Unless otherwise specified, no part of this pub
38、lication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Gen
39、eva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO 2012 All rights reservedCAN/CSA-ISO 20121:13ISO 20121:2012(E) ISO 2012 All rights reserved iiiContents Page Foreword iv Introduction . v 1 Scope 1 2 Normative references 1 3 Terms and definitions . 1 4
40、 Context of the organization 7 4.1 Understanding of the organization and its context . 7 4.2 Understanding the needs and expectations of interested parties . 7 4.3 Determining the scope of the event sustainability management system . 8 4.4 Event sustainability management system 8 4.5 Sustainable dev
41、elopment principles, statement of purpose and values 8 5 Leadership . 9 5.1 Leadership and commitment . 9 5.2 Policy 9 5.3 Organizational roles, responsibilities and authorities 10 6 Planning . 10 6.1 Actions to address risks and opportunities . 10 6.2 Event sustainability objectives and how to achi
42、eve them 11 7 Support . 12 7.1 Resources 12 7.2 Competence . 12 7.3 Awareness 13 7.4 Communication . 13 7.5 Documented information 14 8 Operation 15 8.1 Operational planning and control 15 8.2 Dealing with modified activities, products or services . 15 8.3 Supply chain management . 15 9 Performance
43、evaluation 16 9.1 Performance against governing principles of sustainable development 16 9.2 Monitoring, measurement, analysis and evaluation 16 9.3 Internal audit 16 9.4 Management review 17 10 Improvement 18 10.1 Nonconformity and corrective action 18 10.2 Continual improvement 18 Annex A (informa
44、tive) Guidance on planning and implementing this International Standard . 19 Annex B (informative) Supply chain management 35 Annex C (informative) Evaluation 39 Bibliography 42 CAN/CSA-ISO 20121:13ISO 20121:2012(E) iv ISO 2012 All rights reservedForeword ISO (the International Organization for Stan
45、dardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right
46、 to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International S
47、tandards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an
48、International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 20
49、121 was prepared by Project Committee ISO/PC 250, Sustainability in event management. CAN/CSA-ISO 20121:13ISO 20121:2012(E) ISO 2012 All rights reserved vIntroduction Events are sometimes, by their nature, high profile and transient, with both positive and negative social, economic and environmental impacts. This International Standard has been drafted t
