1、A123.2-03(reaffirmed 2013)Asphalt-coated roofing sheetsUpdate No. 1A123.2-03February 2006Note: General Instructions for CSA Standards are now called Updates. Please contact CSA Information Products Sales or visit www.ShopCSA.ca for information about the CSA Standards Update Service.Title: Asphalt-co
2、ated roofing sheets originally published December 2003The following revisions have been formally approved:Revised Outside front cover, inside front cover, and title pageNew National Standards of Canada textDeleted NoneCSA A123.2-03 originally consisted of 12 pages (vi preliminary and 6 text), each d
3、ated December 2003. It now consists of the following pages:December 2003 iiivi and 16February 2006 Cover, National Standards of Canada text, title page, and copyright page Update your copy by inserting these revised pages.Keep the pages you remove for reference.A National Standard of CanadaCAN/CSA-A
4、123.2-03Asphalt-coated roofing sheets(approved February 2006)Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing vari
5、ed viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis docum
6、ent is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys
7、intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS
8、 VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINES
9、S INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY
10、OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The informatio
11、n in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit comp
12、any that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in p
13、rinted or electronic form), CSA is the owner of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are p
14、rotected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs intellectual property and may give rise to a right in CSA to seek legal redress for such use, modification, copying, or disclosure. CSA res
15、erves all intellectual property rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document ont
16、o a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such cop
17、y.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions con
18、tained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian S
19、tandards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards dev
20、elopment and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by munici
21、pal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and ski
22、lls to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of
23、 income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects
24、products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corp
25、orate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further infor
26、mation on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further de
27、velopment and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting t
28、he consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a nu
29、mber of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a signi
30、ficant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this re
31、mains the continuing responsibility of the accredited standards development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the lat
32、est edition from the organization preparing the standard.The responsibility for approving National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the
33、intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards Association(National Standards of Canada text inserted Februa
34、ry 2006)Prepared byApproved byStandards Council of CanadaNational Standard of CanadaPublished in December 2003 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online St
35、ore at www.ShopCSA.caCAN/CSA-A123.2-03Asphalt-coated roofing sheets(approved February 2006)ISBN 1-55397-234-1Technical Editor: Vanessa Mitchell Canadian Standards Association 2003All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of
36、 the publisher.(Copyright page replaced February 2006)Standards Update ServiceA123.2-03December 2003Title: Asphalt-coated roofing sheetsPagination: 12 pages (vi preliminary and 6 text), each dated December 2003To register for e-mail notification about any updates to this publicationgo to shop.csa.ca
37、click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2015219.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal inf
38、ormation.Published in December 2003 by Canadian Standards Association A not-for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044 Visit our Online Store at www.csa.ca CSA Standard A123.2-03 Asphalt-coated roofing sheets
39、ISBN 1-55397-234-1 Technical Editor: Vanessa Mitchell Canadian Standards Association 2003 All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. Canadian Standards Association Asphalt-coated roofing sheets December 200
40、3 iii Contents Technical Committee on Bituminous Roofing Materials iv Preface vi 1 Scope 1 2 Reference publications 1 3 Definitions 2 4 Manufacturing and materials 2 4.1 General 2 4.2 Felt 2 4.3 Saturant 3 4.4 Coating 3 5 Surface finish 3 6 Testing and selection of test specimens 3 7 Physical proper
41、ties 4 7.1 General 4 7.2 Finished product 4 7.3 Tear strength 4 7.4 Fastener pull-through resistance 4 7.5 Granule loss 4 8 Packaging and marking 4 9 Inspection 4 10 Rejection and retesting 5 Tables 5 A123.2-03 Canadian Standards Association iv December 2003 Technical Committee on Bituminous Roofing
42、 Materials A. Lodge IKO Industries Ltd., Chair Brampton, Ontario K. Wilson Owens-Corning Canada Inc., Vice-Chair Toronto, Ontario W.K. Blanchard TAMKO Roofing Products, Joplin, Missouri, USA M. Bryson Asphalt Roofing Manufacturers Association, Rockville, Maryland, USA W. Clark IKO Industries Ltd., A
43、ssociate Brampton, Ontario J.F. Ct Soprema Inc., Associate Drummondville, Qubec T. Davis Everest Supply Inc., Mississauga, Ontario S. Dinwiddie PABCO Roofing Products, Associate Wilmore, Kentucky, USA D. Fishburn Fishburn Roofing Sciences, Hornby, Ontario C. Foreshew Ontario New Home Warranty Progra
44、m, Toronto, Ontario P.J. Julian EMCO Limited Building Products, LaSalle, Qubec R. Kaethler Ridglass Manufacturing of Canada, Associate Surrey, British Columbia P. Kalinger Canadian Roofing Contractors Association, Ottawa, Ontario J. Kirby National Roofing Contractors Association, Rosemont, Illinois,
45、 USA K. Liu National Research Council Canada, Ottawa, Ontario Canadian Standards Association Asphalt-coated roofing sheets December 2003 v O. Luciw Ontario Ministry of Municipal Affairs and Housing, Toronto, Ontario R. McNulty RAM Bitutech Analytical Services, Hamilton, Ontario L.J. Miller Petro-Can
46、ada Products, Associate Mississauga, Ontario F. Nabhan National Research Council Canada, Ottawa, Ontario G. Nishio Intertek Testing Services NA Ltd., Associate Coquitlam, British Columbia F.T. Pringle City of Cranbrook, Cranbrook, British Columbia G. Riahi Hal Industries, Surrey, British Columbia R.
47、A. Snyder CertainTeed Corporation,Valley Forge, Pennsylvania, USA M. Vandenbussche Canadian Asphalt Shingle Manufacturers Association (CASMA), Saint-Lazare, Qubec J. Watson Roofing Contractors Association Associate of British Columbia, Langley, British Columbia R. Ziegler GAF Materials Corporation,
48、Associate Wayne, New Jersey, USA V.A. Mitchell CSA, Project Manager Mississauga, Ontario A123.2-03 Canadian Standards Association vi December 2003 Preface This is the second edition of CSA A123.2, Asphalt-coated roofing sheets. It supersedes the first edition, published in 1979. It is one of a serie
49、s of CSA Standards on bituminous roofing materials. This Standard was prepared by the Technical Committee on Bituminous Roofing Materials, under the jurisdiction of the Strategic Steering Committee on Building Products and Systems, and has been formally approved by the Technical Committee. It will be submitted to the Standards Council of Canada for approval as a National Standard of Canada. December 2003 Notes: (1) Use of the singular does not exclude the plural (and vice versa) when the sense allows. (2) Although the intended
