1、BSI Standards PublicationPD CEN/TR 15350:2013Mechanical vibration Guideline for the assessment ofexposure to hand-transmittedvibration using availableinformation including thatprovided by manufacturers ofmachineryCopyright British Standards Institution Provided by IHS under license with BSI - Uncont
2、rolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TR 15350:2013 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TR 15350:2013. It supersedes PD CEN/TR 15350:2006 which is withdrawn.This Published Document
3、was prepared by CEN Technical Committee CEN/TC 231, Mechanical vibration and shock, to provide guidance on the assessment of exposure to hand-transmitted vibration, as required by the European Directive on Physical Agents (Vibration), 2002/44/EC. It is not a European or British Standard. The Europea
4、n Union has commissioned separate guidance on implementing the Directive.This Published Document does not constitute guidance on the British implementation of Directive 2002/44/EC. Guidance on the Control of Vibration at Work Regulations 2005 has been published by the Health and Safety Executive. Th
5、e Health and Safety Executive has found that advice in the Annexes to this Published Document can be unreliable, particularly that relating to the content of column 6 of Tables E.1, F.1 and H.1.The EU Guide Non-binding guide to good practice with a view to implementation of Directive 2002/44/EC on t
6、he minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents vibrations can be found at the EU Bookshop URL below.http:/bookshop.europa.eu/en/non-binding-guide-to-good-practicewith-a-view-to-implementation-of-directive-2002-44-ec-on-theminimum
7、-health-and-safety-requirements-regarding-the-exposureof-workers-to-the-risks-arising-from-physical-agents-vibrations-pbKE7007108/Further information concerning preparation of the EU Guide can be found at: UK participation in its preparation was entrusted by Technical Committee GME/21, Mechanical vi
8、bration, shock and condition monitoring, to Subcommittee GME/21/6, Mechanical vibration, shock and condition monitoring - Human exposure to mechanical vibration and shock.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not pu
9、rport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 81144 9ICS 13.160Compliance with a British Standard cannot confer immunity from legal obligati
10、ons.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 March 2014.Amendments/corrigenda issued since publicationDate Text affectedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for Res
11、aleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TR 15350:2013TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15350 August 2013 ICS 13.160 Supersedes CEN/TR 15350:2006English Version Mechanical vibration - Guideline for the assessment of exposure to hand-t
12、ransmitted vibration using available information including that provided by manufacturers of machinery Vibrations mcaniques - Guide pour lvaluation de lexposition aux vibrations transmises la main partir de linformation disponible, y compris linformation fournie par les fabricants de machines Mechan
13、ische Schwingungen - Anleitung zur Beurteilung derBelastung durch Hand-Arm-Schwingungen aus Angaben zu den benutzten Maschinen einschlielich Angaben von den Maschinenherstellern This Technical Report was approved by CEN on 8 June 2013. It has been drawn up by the Technical Committee CEN/TC 231. CEN
14、members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po
15、rtugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by
16、 any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15350:2013: ECopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TR 15350:2013CEN/TR 15350:
17、2013 (E) 2 Contents Page Foreword . 3 Introduction 4 1 Scope 5 2 Normative references . 5 3 Terms and definitions 5 4 Estimation of the vibration magnitude 7 5 Estimation of the daily exposure duration 11 6 Consideration of uncertainties 11 7 Estimation and assessment of the vibration exposure 12 8
18、Documentation . 17 Annex A (informative) Guidance on the information which users could expect from machinery manufacturers and suppliers . 18 Annex B (informative) Principle of the procedure for the estimation of the daily vibration exposure using manufacturers declared emission values 20 Annex C (i
19、nformative) Simplified method for a quick estimate of machine equivalent acceleration 21 Annex D (informative) Use of manufacturers declared values or other values measured according to current vibration test codes . 23 Annex E (informative) Estimation of the daily vibration exposure for electric ma
20、chines 25 Annex F (informative) Estimation of the daily vibration exposure for pneumatic machines . 34 Annex G (informative) Estimation of the daily vibration exposure for machines with internal combustion engine 39 Annex H (informative) Estimation of the daily vibration exposure for hydraulic machi
21、nes 45 Bibliography 50 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TR 15350:2013CEN/TR 15350:2013 (E) 3 Foreword This document (CEN/TR 15350:2013) has been
22、 prepared by Technical Committee CEN/TC 231 “Mechanical vibration and shock”, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifyin
23、g any or all such patent rights. This document supersedes CEN/TR 15350:2006. The main technical changes compared to CEN/TR 15350:2006 are the following ones: an annex on a simplified method for a quick estimate of machine equivalent acceleration has been added; an annex on estimation of the daily vi
24、bration exposure for hydraulic machines has been added; lists of machines in the annexes have been expanded and further vibration emission test codes have been considered. Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction
25、 or networking permitted without license from IHS-,-,-PD CEN/TR 15350:2013CEN/TR 15350:2013 (E) 4 Introduction This Technical Report provides information on how to assess the vibration exposure from hand-held power tools and hand-guided machines. The methods described use existing vibration emission
26、 values declared for the machine of interest or information coming from other sources. It should be noted that vibration usually varies a lot over time, with different workstations and different operators. It is therefore not possible to get precise exposure figures from limited investigations. But
27、also the declared values need to be used with great care since they are measured for a limited number of defined work situations. The actual work situation for a specific operator, however, may be very different thus creating different vibration. On the other hand values from real work that can be f
28、ound in literature are only correct for the specific work situation and time when they were measured. The user of this Technical Report should be aware that the exposure to vibration does not only depend on the machine used but also to a large extent on things like quality of inserted tools, the wor
29、k situation and operator behaviour. These factors need to be taken into account to make an ideal assessment of vibration exposure. The daily vibration exposure to be assessed depends on both the average magnitude of vibration at the surface in contact with the hand and the total daily duration for w
30、hich an employee is in contact with that vibration. As there is a big difference between a rough estimation of the daily vibration exposure to identify workers at risk and the definition of the state of the art regarding machine vibration emission, vibration total values calculated by applying corre
31、ction factors are not suitable to determine the state of the art for machine categories. To define the state of the art a high level of accuracy is needed, which means that this can only be obtained by measurements in all three axes. Copyright British Standards Institution Provided by IHS under lice
32、nse with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TR 15350:2013CEN/TR 15350:2013 (E) 5 1 Scope This Technical Report gives guidelines for estimating, assessing and documenting the daily vibration exposure due to the use of hand
33、-held power tools and hand-guided machines, according to the requirements of the European Physical Agents Directive (vibration) 2002/44/EC. This Technical Report is addressed to competent services for the assessment of vibration exposure at the workplace and to national authorities and industrial or
34、ganisations. It helps to establish documentation for specific machinery or work situations and can also be useful for employers. It follows the method of EN ISO 5349-1 and EN ISO 5349-2 but instead of measuring the vibration magnitudes at the specific workplaces, the methods in this Technical Report
35、 use existing vibration values from other sources of information including those provided by the manufacturers of the machinery according to the requirements of the Machinery Directive 2006/42/EC. It is important that the vibration values used in the exposure assessment are representative of those i
36、n the specific use of the machinery. Workplace measurements, however, are required if suitable data are not available to represent the vibration under the specific working conditions or if the calculation results do not help to decide whether or not the vibration exposure limit value or exposure act
37、ion value is likely to be exceeded. This Technical Report gives guidance on how to estimate the exposure duration and the daily vibration exposure A(8) as defined in EN ISO 5349-1. It also offers a simple method for estimating the daily vibration exposure by means of a table which indicates the vibr
38、ation exposure as a function of the equivalent vibration total value and the associated exposure duration. Both methods can be used even in cases of multiple exposures on the same day. Annex A gives guidance for manufacturers and suppliers of machinery concerning information that warns of risks from
39、 vibration, which should be reported to the customer. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest e
40、dition of the referenced document (including any amendments) applies. EN ISO 5349-1, Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements (ISO 5349-1) EN ISO 5349-2:2001, Mechanical vibration Measurement and evaluation of human
41、exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 5349-2:2001 and the following apply. 3.1 user time daily duration of the work invo
42、lving the use of the machinery, i.e. including the interruptions required by the work and the break periods directly related to the use Note 1 to entry: This is more likely to be reported by the operator than the exposure duration (see 3.2). 3.2 exposure duration T total duration the hand is in dire
43、ct contact with the vibrating surface (handle, work piece, etc.) Note 1 to entry: The exposure duration is often confused with the user time when estimating the daily exposure duration T (see Example in 7.2.2). Copyright British Standards Institution Provided by IHS under license with BSI - Uncontro
44、lled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TR 15350:2013CEN/TR 15350:2013 (E) 6 EXAMPLE The user time for mounting wheels on five automobiles is estimated by the operator at 1 h per day; but the exposure duration is just 5 cars x 4 lug nuts x
45、4 wheels x 2 loosening/tightening actions x 4 s which yields T = 0,18 h. The exposure proportion (see 3.3) is only 18 %. 3.3 exposure proportion exposure duration expressed as percentage of the user time Note 1 to entry: The exposure proportion varies depending on the machinery and its use. It can b
46、e determined in time studies. Some indication is given in G.2. 3.4 equivalent vibration total value ahv,eqtime-averaged sum of the vibration total values of the various machinery operating modes, ahvi, during their associated exposure durations Ti: imiihvTaT=12eqhv,1a (1) Note 1 to entry: For the vi
47、bration total value ahv, see EN ISO 5349-1. The total exposure duration T for a machine is the sum of all m individual exposure durations Tiwithin the entire work cycle considered (see Table G.1 and Example in 7.2.2). If there is one operating mode only, then ahv,eq= ahv. 3.5 partial vibration expos
48、ure points PEindex describing the vibration exposure from a single machine or work task during the associated exposure duration: 100h8m/s5,2aP22eqhv,E=T(2) with the equivalent vibration total value ahv,eqand the associated exposure duration T Note 1 to entry: Vibration exposure points are a simple a
49、lternative to the A(8) value for describing a persons partial or total daily vibration exposure. The relationship is: E2P10m/s5,2)8(A = (3) This relationship is plotted in Figure 1. 3.6 total vibration exposure points PE tot sum of the partial vibration exposure points PEwithin one day: =nii1EtotEPP
