1、Information technology UPnP Device ArchitecturePart 26-3: Telephony device control protocol Level 2 Telephony server deviceBS ISO/IEC 29341-26-3:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device Architecture Part 26-3: Telephony d
2、evice control protocol Level 2 Telephony server deviceTechnologies de linformation Architecture de dispositif UPnP Partie 26-3: Protocole de contrle de dispositif de tlphonie Niveau 2 Dispositif de serveur de tlphonieINTERNATIONAL STANDARDISO/IEC29341-26-3Reference numberISO/IEC 29341-26-3:2017(E)Fi
3、rst edition2017-09 ISO/IEC 2017National forewordThis British Standard is the UK implementation of ISO/IEC 29341-26-3:2017.The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination.A list of organizations represented on this committee can
4、be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90867 5ICS 35.200Compliance
5、 with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO/IEC 29341263:2017I
6、nformation technology UPnP Device Architecture Part 26-3: Telephony device control protocol Level 2 Telephony server deviceTechnologies de linformation Architecture de dispositif UPnP Partie 26-3: Protocole de contrle de dispositif de tlphonie Niveau 2 Dispositif de serveur de tlphonieINTERNATIONAL
7、STANDARDISO/IEC29341-26-3Reference numberISO/IEC 29341-26-3:2017(E)First edition2017-09 ISO/IEC 2017BS ISO/IEC 29341263:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publicati
8、on may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country o
9、f the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 29341-26-3:2017(E)BS ISO/IEC 29341263:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Publis
10、hed in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permissio
11、n can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 29341-26-3:2017(E)ISO/IEC 29341-26
12、-3:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS 1 Scope iv 2 Normative references 1 3 Terms, definitions and abbreviated terms . 1 4 Notations and conventions . 2 4.1 Text conventions 2 4.2 Vendor-defined Extensions . 2 5 Device Definitions 2 5.1 Device Type . 2 5.2 TelephonyServer Device A
13、rchitecture . 3 5.3 Device Model . 3 5.3.1 Telephony Server Identity Requirements . 4 6 XML Device Description . 4 7 Test 6 Annex A (informative) Theory of Operation 7 Annex B (informative) Bibliography . 8 Figure 1 TelephonyServer Device Architecture . 3 Figure A.1 Telephony Server (TS) and Telepho
14、ny Control Point (TelCP) Interactions . 7 Table 1 Device Requirements 3 BS ISO/IEC 29341263:2017ISO/IEC 29341-26-3:2017(E) iv ISO/IEC 2017 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialize
15、d system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committ
16、ees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures
17、used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of
18、the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent righ
19、ts identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an exp
20、lanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information I
21、SO/IEC 29341263 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general t
22、itle Information technology UPnP Device Architecture, can be found on the ISO web site. BS ISO/IEC 29341263:2017ISO/IEC 29341-26-3:2017(E) iv ISO/IEC 2017 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) for
23、m the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC t
24、echnical committees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
25、 The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the edi
26、torial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of
27、 any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorse
28、ment. For an explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementa
29、ry information ISO/IEC 29341263 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, und
30、er the general title Information technology UPnP Device Architecture, can be found on the ISO web site. ISO/IEC 29341-26-3:2017(E) ISO/IEC 2017 All rights reserved v Introduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of paten
31、ts as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicant
32、s throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Depart
33、ment 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US I
34、nformation may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529
35、936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: D
36、igital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Buildin
37、g, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO tha
38、t it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tas
39、man Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 29341263:2017IS
40、O/IEC 29341-26-3:2017(E) vi ISO/IEC 2017 All rights reserved Hewlett Packard Company has informed IEC and ISO that it has patent applications or granted patents as listed below: 5 956 487 / US; 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information
41、 may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Don
42、g, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Building, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorpor
43、ated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO that it has patent applications or granted patents. Information may be
44、obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Attention is drawn to the possibili
45、ty that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29341-26-3:2017(E) ISO/IEC 2017 All rights reserved vii Original UPnP Document Referen
46、ce may be made in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and later by UPnP Forum. The following table indicates the original UPnP document titles
47、and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basi
48、c:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service
49、ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingC
