1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 6727:2012Road vehicles Motorcycles Symbols for controls, indicators and tell-talesBS ISO 6727:2012 BRITISH STANDARDNational forewordThis British Standard is the UK impleme
2、ntation of ISO 6727:2012. The UK participation in its preparation was entrusted to T e c h n i c a l Committee AUE/14, Motor cycles and mopeds.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necess
3、ary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012. Published by BSI Standards Limited 2012.ISBN 978 0 580 57846 5 ICS 01.080.20; 43.140 Compliance with a British Standard cannot confer immunity from legal obligations.This British
4、Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2012.Amendments issued since publicationDate T e x t a f f e c t e dBS ISO 6727:2012Reference numberISO 6727:2012(E)ISO 2012INTERNATIONAL STANDARD ISO6727Second edition2012-09-15Road vehicles Mo
5、torcycles Symbols for controls, indicators and tell-tales Vhicules routiers Motocycles Symboles pour les commandes, les indicateurs et les tmoins BS ISO 6727:2012ISO 6727:2012(E) COPYRIGHT PROTECTED DOCUMENT ISO 2012 All rights reserved. Unless otherwise specified, no part of this publication may be
6、 reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 4
7、1 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2012 All rights reservedBS ISO 6727:2012ISO 6727:2012(E) ISO 2012 All rights reserved iiiContents Page Foreword iv 1 Scope 1 2 General . 1 Annex A (normative) Lighting and signalling devices
8、3 Annex B (normative) Braking system . 5 Annex C (normative) Engine 6 Annex D (normative) Fuel system . 7 Annex E (normative) Transmission 8 Annex F (normative) Electrical functions in general, and electric or hybrid electric motorcycles 9 Annex G (normative) Security . 10 Annex H (normative) Comfor
9、t 11 Bibliography 12 BS ISO 6727:2012ISO 6727:2012(E) iv ISO 2012 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out thr
10、ough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collabo
11、rates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are c
12、irculated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 6727 may be the subject of patent rights. ISO shall not be h
13、eld responsible for identifying any or all such patent rights. ISO 6727 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 22, Motorcycles. This second edition cancels and replaces the first edition (ISO 6727:1981), which has been technically revised. BS ISO 6727:2012INTER
14、NATIONAL STANDARD ISO 6727:2012(E) ISO 2012 All rights reserved 1Road vehicles Motorcycles Symbols for controls, indicators and tell-tales 1 Scope This International Standard specifies the symbols, i.e. conventional signs, used to identify certain controls, indicators and tell-tales on a motorcycle1
15、)and to facilitate their usage 2). This International Standard also indicates the colours of possible optical tell-tales which warn the driver of the operation or malfunctioning of the related devices and equipment. This International Standard is applicable to those controls, indicators and tell-tal
16、es, which, when used, are fitted on the instrument panel or in the immediate vicinity of the motorcycle rider. 2 General 2.1 It is not mandatory to adopt a symbol for all controls, indicators and tell-tales likely to be fitted on the motorcycle. Nevertheless, when symbols are provided (because they
17、have been enforced by law or for any manufacturers reason) their type shall be as specified in this International Standard. 2.2 The symbols must be such that, when viewed by the driver, from his normal seated position, they are recognizable as shown in Annexes A to H 3). 2.3 Symbols on controls and
18、tell-tales shall have a good contrast with their background. Some symbols can be only embossed if the symbols are identified clearly without paint. 2.4 The symbol must be placed on, or adjacent to, the control or tell-tale to be identified. Where this is not possible, the symbol and the control or t
19、ell-tale must be joined by a continuous line as short as possible. 2.5 If, in a symbol, a motorcycle or parts of a motorcycle are shown in a side view, a motorcycle driving from right to left shall be used. 2.6 Focused light shall be represented by parallel rays and diffuse light by divergent rays.
20、2.7 When the following colours are used on the optical tell-tales, they shall have the meaning indicated below: red: danger; yellow (amber): caution; 1) Motorcycle as defined in ISO 3833. 2) Prints of these symbols for reproduction purposes may be obtained from the ISO Central Secretariat. 3) Many o
21、f these symbols are also contained in ISO 2575. The symbol reference number may be different in the two international standards but the ISO/IEC registration number is the same. BS ISO 6727:2012ISO 6727:2012(E) 2 ISO 2012 All rights reserved green: safety; blue shall only be used for the headlight up
22、per beam tell-tale. BS ISO 6727:2012ISO 6727:2012(E) ISO 2012 All rights reserved 3Annex A (normative) Lighting and signalling devices Symbol number Symbol form/shape Symbol description/application ISO/IEC registration number A.01 High (main) beamColour of telltale light: blue Framed areas of this s
23、ymbol may be solid. The control operating alternately the high beam and the low beam may include two symbols, one for each of the positions: high beam, low beam. 7000-0082 A.02 Low (dipped) beamFramed areas of this symbol may be solid. The control operating alternately the high beam and the low beam
24、 may include two symbols, one for each of the positions: high beam, low beam. 7000-0083 A.03 Front fog lightColour of telltale light: green If one control is used for both front and rear fog lights, this symbol shall be used. 7000-0633 A.04 Rear fog lightColour of telltale light: yellow (amber) If o
25、ne control is used for both front and rear fog lights, the symbol for front fog light (A.03) shall be used. 7000-0634 A.05 Parking lightsLighting switch may be combined with ignition control. 7000-0240 A.06 Position lightsLighting switch may be combined with ignition control. 7000-0456 BS ISO 6727:2
26、012ISO 6727:2012(E) 4 ISO 2012 All rights reservedSymbol number Symbol form/shape Symbol description/application ISO/IEC registration number A.07 Master lighting switch Lighting switch may be combined with ignition control. Application of IEC 60417-5012 A.08 Turn signals Colour of telltale light: gr
27、een Framed areas of this symbol may be solid. 7000-0084 A.09 Hazard warningSimultaneous operation of both green turn signal tell-tales, or separate red signal. This symbol applies only to the control and to the separate red tell-tale. Framed areas of this symbol may be solid. 7000-0085 A.10 Horn 700
28、0-0244 BS ISO 6727:2012ISO 6727:2012(E) ISO 2012 All rights reserved 5Annex B (normative) Braking system Symbol number Symbol form/shape Symbol description/application ISO/IEC registration number B.01 Anti-lock brake system, failureColour of telltale light: yellow (amber) The letters “ABS“ may match
29、 the type style used throughout the instrument panel. 7000-1407 BS ISO 6727:2012ISO 6727:2012(E) 6 ISO 2012 All rights reservedAnnex C (normative) Engine Symbol number Symbol form/shape Symbol description/application ISO/IEC registration number C.01 Engine coolant temperatureColour of telltale light
30、: red 7000-0246 C.02 Engine oil Colour of telltale light: red Framed areas of this symbol may be solid. 7000-0248 C.03 Choke Manual choke (cold starting aid) Colour of telltale light: yellow (amber) 7000-0243 C.04 Ignition control of supplemental engine stop (Run) 7000-2425 C.05 Ignition control of
31、supplemental engine stop (Off) 7000-1180 C.06 Engine Colour of telltale light: yellow (amber) 7000-0640 BS ISO 6727:2012ISO 6727:2012(E) ISO 2012 All rights reserved 7Annex D (normative) Fuel system Symbol number Symbol form/shape Symbol description/application ISO/IEC registration number D.01 or Fu
32、el Colour of telltale light: yellow (amber) This symbol may also be used on the filler cap of the fuel tank. 7000-0245 D.02 Fuel tank shut off valve position, “off“Framed areas of this symbol may be solid. 4)D.03 Fuel tank shut off valve position, “on“Framed areas of this symbol may be solid. 7000-3
33、031 D.04 Fuel tank shut off valve position, “reserve“Framed areas of this symbol may be solid. 7000-3032 4) Not registered in ISO 7000, but required for motorcycles by UNECE global technical regulation (UNECE/TRANS/180/Add.12). BS ISO 6727:2012ISO 6727:2012(E) 8 ISO 2012 All rights reservedAnnex E (
34、normative) Transmission Symbol number Symbol form/shape Symbol description/application ISO/IEC registration number E.01 Neutral IndicatorColour of telltale light: green May match the type style used throughout the instrument panel. BS ISO 6727:2012ISO 6727:2012(E) ISO 2012 All rights reserved 9Annex
35、 F (normative) Electrical functions in general, and electric or hybrid electric motorcycles Symbol number Symbol form/shape Symbol description/application ISO/IEC registration number F.01 Battery charging conditionColour of telltale light: red 7000-0247 F. 02 Electric starter; engine electric start
36、7000-3033A F.03 Ignition switch Application of IEC 60417-5009 F.04 On Position (Ignition Switch) Application of IEC 60417-5007 F.05 Off Position (Ignition Switch) Application of IEC 60417-5008 BS ISO 6727:2012ISO 6727:2012(E) 10 ISO 2012 All rights reservedAnnex G (normative) Security Symbol number
37、Symbol form/shape Symbol description/application ISO/IEC registration number G.01 Steering Lock Application of IEC 60417-5569 G.02 Helmet lock (Helmet holder) 7000-3034 BS ISO 6727:2012ISO 6727:2012(E) ISO 2012 All rights reserved 11Annex H (normative) Comfort Symbol number Symbol form/shape Symbol
38、description/application ISO/IEC registration number H.01 Windscreen adjustment type 7000-3035 H.02 Handgrip heater 7000-3036 BS ISO 6727:2012ISO 6727:2012(E) 12 ISO 2012 All rights reservedBibliography 1 ISO 2575, Road vehicles Symbols for controls, indicators and tell-tales 2 ISO 3833, Road vehicle
39、s Types Terms and definitions 3 ISO 7000, Graphical symbols for use on equipment Registered symbols 4 UNECE/TRANS/180/Add.12, 2011, Global technical regulation concerning the location, identification and operation of motorcycle controls, tell-tales and indicators, Addendum 12 5 IEC 60417, Graphical
40、symbols for use on equipment BS ISO 6727:2012BS ISO 6727:2012ISO 6727:2012(E) ICS 01.080.20; 43.140 Price based on 12 pages ISO 2012 All rights reserved This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publi
41、cations, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards wor
42、ldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to i
43、mprove the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please n
44、otify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 89
45、96 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)
46、20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standar
47、ds through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administrati
48、on. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for
