1、BRITISH STANDARD BS ISO 3984:2004 Road vehicles Rear moving barrier impact test procedure ICS 43.100 BS ISO 3984:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 21 February 2005 BSI 21 February 2005 ISBN 0 580 45517 3 National foreword T
2、his British Standard reproduces verbatim ISO 3984:2004 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee AUE/15, Safety related to vehicles, which has the responsibility to: A list of organizations represented on this committe
3、e can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility
4、 of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. a
5、id enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages T
6、his document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 14, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Co
7、mments Reference number ISO 3984:2004(E)INTERNATIONAL STANDARD ISO 3984 Third edition 2004-05-15 Road vehicles Rear moving barrier impact test procedure Vhicules routiers Mode opratoire dessai de choc arrire sur barrire mobile BSISO3984:2004ii BSISO3984:2004IS:4893 O4002(E) iiiContents Page Foreword
8、 iv 1 Scope 1 2 Normative references. 1 3 Test facility and equipment 1 4 Preparation of test vehicle . 3 5 Velocity. 4 6 Instrumentation and photographic (or equivalent) documentation. 4 7 Dummy. 5 BSISO3984:2004IS:4893 O4002(E) iv Foreword ISO (the International Organization for Standardization) i
9、s a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represe
10、nted on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are d
11、rafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International
12、Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 3984 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 10, Impact test procedures. This third edition cancels and replaces the second edition (ISO 3984:1982), which has been technically revised. BSISO3984:2004
