1、BSI Standards PublicationBS ISO 20106:2015Space data and informationtransfer systems Missionoperations common objectmodelBS ISO 20106:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 20106:2015.The UK participation in its preparation was entrusted to Techni
2、cal Committee ACE/68, Space systems and operations.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British
3、 Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87574 8 ICS 49.140 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December
4、2015.Amendments/corrigenda issued since publicationDate Text affectedBS ISO 20106:2015 ISO 2015Space data and information transfer systems Mission operations common object modelSystmes de transfert des informations et donnes spatiales Modle dobjet commun des oprations de missionINTERNATIONAL STANDAR
5、DISO20106First edition2015-08-15Reference numberISO 20106:2015(E)BS ISO 20106:2015 ISO 2015Space data and information transfer systems Mission operations common object modelSystmes de transfert des informations et donnes spatiales Modle dobjet commun des oprations de missionINTERNATIONAL STANDARDISO
6、20106First edition2015-08-15Reference numberISO 20106:2015(E)BS ISO 20106:2015ISO 20106:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized othe
7、rwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeC
8、h. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 20106:2015ISO 20106:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise speci
9、fied, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or IS
10、Os member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 20106:2015ISO 20106:2015(E) ISO 2015 All rights reserved iiiForewordISO (the International Organ
11、ization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been establish
12、ed has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
13、 International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Pu
14、blication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such paten
15、t rights. ISO 20106 was prepared by the Consultative Committee for Space Data Systems (CCSDS) (as CCSDS 521.1-B-1, November 2012) and was adopted (without modifications except those stated in clause 2 of this International Standard) by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subc
16、ommittee SC 13, Space data and information transfer systems.BS ISO 20106:2015BS ISO 20106:2015Recommendation for Space Data System Standards MISSION OPERATIONS COMMON OBJECT MODELRECOMMENDED STANDARD CCSDS 521.1-B-1 BLUE BOOK February 2014 BS ISO 20106:2015Recommendation for Space Data System Standa
17、rds MISSION OPERATIONS COMMON OBJECT MODELRECOMMENDED STANDARD CCSDS 521.1-B-1 BLUE BOOK February 2014 BS ISO 20106:2015RECOMMENDED STANDARD FOR MISSION OPERATIONS COMMON OBJECT MODEL CCSDS 521.1-B-1 Page i February 2014 AUTHORITYIssue: Recommended Standard, Issue 1 Date: February 2014 Location: Was
18、hington, DC, USA This document has been approved for publication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and represents the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for review and authorization of CCSDS doc
19、uments is detailed in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-3), and the record of Agency participation in the authorization of this document can be obtained from the CCSDS Secretariat at the address below. This document is published and maint
20、ained by: CCSDS Secretariat Space Communications and Navigation Office, 7L70 Space Operations Mission Directorate NASA Headquarters Washington, DC 20546-0001, USA ISO 20106:2015(E) ISO 2015 All rights reservedBS ISO 20106:2015RECOMMENDED STANDARD FOR MISSION OPERATIONS COMMON OBJECT MODEL CCSDS 521.
21、1-B-1 Page ii February 2014 STATEMENT OF INTENT The Consultative Committee for Space Data Systems (CCSDS) is an organization officially established by the management of its members. The Committee meets periodically to address data systems problems that are common to all participants, and to formulat
22、e sound technical solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary, the results of Committee actions are termed Recommended Standards and are not considered binding on any Agency. This Recommended Standard is issued by, and represents the consensus of, the
23、CCSDS members. Endorsement of this Recommendation is entirely voluntary. Endorsement, however, indicates the following understandings: o Whenever a member establishes a CCSDS-related standard, this standard will be in accord with the relevant Recommended Standard. Establishing such a standarddoes no
24、t preclude other provisions which a member may develop. o Whenever a member establishes a CCSDS-related standard, that member will provide other CCSDS members with the following information: - The standard itself. - The anticipated date of initial operational capability. - The anticipated duration o
25、f operational service. o Specific service arrangements shall be made via memoranda of agreement. Neither this Recommended Standard nor any ensuing standard is a substitute for a memorandum of agreement. No later than three years from its date of issuance, this Recommended Standard will be reviewed b
26、y the CCSDS to determine whether it should: (1) remain in effect without change; (2) be changed to reflect the impact of new technologies, new requirements, or new directions; or (3) be retired or canceled. In those instances when a new version of a Recommended Standard is issued, existing CCSDS-rel
27、ated member standards and implementations are not negated or deemed to be non-CCSDS compatible. It is the responsibility of each member to determine when such standards or implementations are to be modified. Each member is, however, strongly encouraged to direct planning for its new standards and im
28、plementations towards the later version of the Recommended Standard. ISO 20106:2015(E) ISO 2015 All rights reservedBS ISO 20106:2015BS ISO 20106:2015RECOMMENDED STANDARD FOR MISSION OPERATIONS COMMON OBJECT MODEL CCSDS 521.1-B-1 Page i February 2014 AUTHORITYIssue: Recommended Standard, Issue 1 Date
29、: February 2014 Location: Washington, DC, USA This document has been approved for publication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and represents the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for review a
30、nd authorization of CCSDS documents is detailed in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-3), and the record of Agency participation in the authorization of this document can be obtained from the CCSDS Secretariat at the address below. This do
31、cument is published and maintained by: CCSDS Secretariat Space Communications and Navigation Office, 7L70 Space Operations Mission Directorate NASA Headquarters Washington, DC 20546-0001, USA ISO 20106:2015(E) ISO 2015 All rights reservedBS ISO 20106:2015RECOMMENDED STANDARD FOR MISSION OPERATIONS C
32、OMMON OBJECT MODEL CCSDS 521.1-B-1 Page ii February 2014 STATEMENT OF INTENT The Consultative Committee for Space Data Systems (CCSDS) is an organization officially established by the management of its members. The Committee meets periodically to address data systems problems that are common to all
33、participants, and to formulate sound technical solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary, the results of Committee actions are termed Recommended Standards and are not considered binding on any Agency. This Recommended Standard is issued by, and repr
34、esents the consensus of, the CCSDS members. Endorsement of this Recommendation is entirely voluntary. Endorsement, however, indicates the following understandings: o Whenever a member establishes a CCSDS-related standard, this standard will be in accord with the relevant Recommended Standard. Establ
35、ishing such a standarddoes not preclude other provisions which a member may develop. o Whenever a member establishes a CCSDS-related standard, that member will provide other CCSDS members with the following information: - The standard itself. - The anticipated date of initial operational capability.
36、 - The anticipated duration of operational service. o Specific service arrangements shall be made via memoranda of agreement. Neither this Recommended Standard nor any ensuing standard is a substitute for a memorandum of agreement. No later than three years from its date of issuance, this Recommende
37、d Standard will be reviewed by the CCSDS to determine whether it should: (1) remain in effect without change; (2) be changed to reflect the impact of new technologies, new requirements, or new directions; or (3) be retired or canceled. In those instances when a new version of a Recommended Standard
38、is issued, existing CCSDS-related member standards and implementations are not negated or deemed to be non-CCSDS compatible. It is the responsibility of each member to determine when such standards or implementations are to be modified. Each member is, however, strongly encouraged to direct planning
39、 for its new standards and implementations towards the later version of the Recommended Standard. ISO 20106:2015(E) ISO 2015 All rights reservedBS ISO 20106:2015BS ISO 20106:2015RECOMMENDED STANDARD FOR MISSION OPERATIONS COMMON OBJECT MODEL CCSDS 521.1-B-1 Page iii February 2014 FOREWORDAttention i
40、s drawn to the possibility that some of the elements of this document may be the subject of patent rights. CCSDS shall not be held responsible for identifying any or all such patent rights. Through the process of normal evolution, it is expected that expansion, deletion, or modification of this docu
41、ment may occur. This Recommended Standard is therefore subject to CCSDS document management and change control procedures, which are defined in Organization and Processes for the Consultative Committee for Space Data Systems(CCSDS A02.1-Y-3). Current versions of CCSDS documents are maintained at the
42、 CCSDS Web site: http:/www.ccsds.org/Questions relating to the contents or status of this document should be addressed to the CCSDS Secretariat at the address indicated on page i. ISO 20106:2015(E) ISO 2015 All rights reservedBS ISO 20106:2015RECOMMENDED STANDARD FOR MISSION OPERATIONS COMMON OBJECT
43、 MODEL CCSDS 521.1-B-1 Page iv February 2014 At time of publication, the active Member and Observer Agencies of the CCSDS were: Member Agencies Agenzia Spaziale Italiana (ASI)/Italy. Canadian Space Agency (CSA)/Canada. Centre National dEtudes Spatiales (CNES)/France. China National Space Administrat
44、ion (CNSA)/Peoples Republic of China. Deutsches Zentrum fr Luft- und Raumfahrt (DLR)/Germany. European Space Agency (ESA)/Europe. Federal Space Agency (FSA)/Russian Federation. Instituto Nacional de Pesquisas Espaciais (INPE)/Brazil. Japan Aerospace Exploration Agency (JAXA)/Japan. National Aeronaut
45、ics and Space Administration (NASA)/USA. UK Space Agency/United Kingdom. Observer Agencies Austrian Space Agency (ASA)/Austria. Belgian Federal Science Policy Office (BFSPO)/Belgium. Central Research Institute of Machine Building (TsNIIMash)/Russian Federation. China Satellite Launch and Tracking Co
46、ntrol General, Beijing Institute of Tracking and Telecommunications Technology (CLTC/BITTT)/China. Chinese Academy of Sciences (CAS)/China. Chinese Academy of Space Technology (CAST)/China. Commonwealth Scientific and Industrial Research Organization (CSIRO)/Australia. Danish National Space Center (
47、DNSC)/Denmark. Departamento de Cincia e Tecnologia Aeroespacial (DCTA)/Brazil. European Organization for the Exploitation of Meteorological Satellites (EUMETSAT)/Europe. European Telecommunications Satellite Organization (EUTELSAT)/Europe. Geo-Informatics and Space Technology Development Agency (GIS
48、TDA)/Thailand. Hellenic National Space Committee (HNSC)/Greece. Indian Space Research Organization (ISRO)/India. Institute of Space Research (IKI)/Russian Federation. KFKI Research Institute for Particle b) the parameter data associated with each operation; c) the required behaviour of each operatio
49、n; d) the use of the model. It does not specify: a) individual implementations or products; b) the implementation of entities or interfaces within real systems; c) the methods or technologies required for communications. 1.3 DOCUMENT STRUCTURE This Recommended Standard is organised as follows: a) section 1 provides purpose and scope, and lists definitions, conventions, and references used throughout the Recommended Standard; b) section 2 presents an overview of the concepts
